Whirlpool Washer Pumps
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Whirlpool Washer Pumps
Your Price
$53.95
In Stock
Whirlpool Washer Drain Pump
PartSelect Number PS11756700
Manufacturer Part Number WPW10605427
This drain pump for your washer is designed to remove the dirty water during and after the washing cycle. If your washer has water left in it after its washing cycle is over, or if your washer is experiencing leaks around the drain pump, the pump may be damaged or bad and in need of replacement. Ensure you remove and test your drain pump with a multimeter before replacing it. Replacing this pump will require some disassembly of your washer. This pump is sold individually, and does not come with any wire harness or other accessories.
Fixes these symptoms
- Draining Issues
- Leaking
- Will not drain
- See more...
Installation Instructions
JASON from HILLIARD, FL
Drain pump was cracked
Turned washer on its side. Pulled the bottom plate off. Then unplugged the electrical lines. Then unbolted the drain pump and bolted the new drain pump in. Then reversed the process.
Read more...
Your Price
$41.95
In Stock
Whirlpool Washer Direct Drive Water Pump
PartSelect Number PS11741239
Manufacturer Part Number WP3363394
The direct drive drain pump (Whirlpool Direct Drive Washer Pump, Drain Pump, Washer Drain Pump, Water Pump) removes water from the washer during the drain cycle without the use of a belt. The pump is supposed to drain the water from the washer; if the water isn’t draining or if there is a leak, you may have a problem with your pump. You must replace this part if there is a blockage or clog. Although the symptoms may point to a malfunctioning drain pump, there could actually be a problem with one of the connecting hoses. This pump connected directly to the motor, and comes in white plastic. This replacement part features 1 direct drive water pump with 2 ports for water to pass through: a large one and a smaller one.
Fixes these symptoms
- Draining Issues
- Leaking
- Leaks water
- See more...
Installation Instructions
RICHARD from PHILA, PA
Replace Water Pump Coupling
Removed casing tip over washer disconnected water pump. Disconnected motor then replace coupling then reassemble motor then replaced water pump.
Read more...
Your Price
$108.95
In Stock
Whirlpool Washer Drain Pump
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in. Read more...
PartSelect Number PS11757304
Manufacturer Part Number WPW10730972
This is a manufacturer-approved replacement drain pump for your washing machine. To complete this repair you will need a 1/4 inch nut driver, 5/16ths nut driver, a flat blade screwdriver, and a pair of pliers. Make sure to disconnect power to the washer before beginning this repair.
Fixes these symptoms
- Burning smell
- Draining Issues
- Engine runs but does not pump water
- See more...
Installation Instructions
Andrew from St.Louis, MO
F 21 error
Removed the front panel unpluggedThe washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in. Read more...
Your Price
$134.95
In Stock
Whirlpool Washer Drain Pump Kit
(3) I packed towels under the washer.
(4) I slowly removed the cleanout in the front of the pump, using the water vac to catch the water as it leaked out.
(5) I removed the wiring to the motor.
(6) I removed the screw that holds the pump in place with a Torx T-20 socket.
(7) I pulled the pump forward so the clamps that hold the drain hose and discharge hose could be removed using the hose clamp pliers. ( they come off much easier then they go back on ).
(8) I tested the pump and found it would run but was making a lot of noise and running slow.
(9) To reinstall start with number (7) and work backwards to number (1) skipping (3) and (4).
Don Kramer
Wichita, Kansas Read more...
PartSelect Number PS1485610
Manufacturer Part Number 280187
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.
Fixes these symptoms
- Draining Issues
- Leaking
- Will not drain
- See more...
Installation Instructions
Donald from Wichita, KS
Washer would not drain ,F02 and SUD code displaying
(1) First I unpluged the washer then I removed the water from the tube with a water vac.(2) Then I removed the three (3) screws that holds the front panel, using a Torx T-20 socket. ( this is a front load washer ). The panel is below the loading door. (3) I packed towels under the washer.
(4) I slowly removed the cleanout in the front of the pump, using the water vac to catch the water as it leaked out.
(5) I removed the wiring to the motor.
(6) I removed the screw that holds the pump in place with a Torx T-20 socket.
(7) I pulled the pump forward so the clamps that hold the drain hose and discharge hose could be removed using the hose clamp pliers. ( they come off much easier then they go back on ).
(8) I tested the pump and found it would run but was making a lot of noise and running slow.
(9) To reinstall start with number (7) and work backwards to number (1) skipping (3) and (4).
Don Kramer
Wichita, Kansas Read more...
Your Price
$94.95
In Stock
Whirlpool Washer Water Pump
PartSelect Number PS11738156
Manufacturer Part Number W10876600
This drain pump is specially designed to fit in top load washing machines. It is responsible for removing water from the washer tub during the drain cycle and directing it to the household plumbing system through the drain hose. If you notice longer draining times, grinding or rattling sounds, or standing water in the tub at the end of a cycle, the drain pump is likely faulty. This may be due to several reasons such as normal aging, wiring problems or physical damage. It is also common for the drain pump to become clogged with small items such as coins or buttons.
Fixes these symptoms
- Draining Issues
- Will not drain
- See more...
Your Price
$51.43
In Stock
Whirlpool Washer Water Pump
Great company. Read more...
PartSelect Number PS11757016
Manufacturer Part Number WPW10661045
This genuine OEM drain pump is designed for washing machines. It is responsible for removing the wastewater from the machine during the drain cycle. The drain pump works by creating suction to draw water out of the tub and push it out through the drain hose. Signs of a faulty drain pump include the washer failing to drain water properly, leaving clothes wet at the end of the cycle, or loud, unusual noises during the drain cycle, such as grinding or humming sounds. Additionally, if the drain pump is visibly damaged, or leaking, then it likely needs to be replaced. You can find the drain pump located at the bottom of the washing machine.
Fixes these symptoms
- Draining Issues
- Will not drain
- See more...
Installation Instructions
Kris from W MANSFIELD, OH
Washer would not drain
Im a 58 year old single woman. Swap out of pump motor was so easy. Took less than 15 min. Ordered the part on Tuesday it came the next day. I installed it and did 4 loads of laundry. Great company. Read more...
Your Price
$89.13
In Stock
Whirlpool Washer Drain Pump - 120v 60hz
PartSelect Number PS11751719
Manufacturer Part Number WPW10276397
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time
Fixes these symptoms
- Draining Issues
- Leaking
- Will not drain
- See more...
Installation Instructions
REED from BUCHANAN, NY
Wouldn’t drain pump made loud noise
Removed old drain pump and found a sock in the inlet - must have burned out pump because after removing it pump was still defective. Installed new pump in about 30 minutes and off to the races no more issues
Read more...
Your Price
$129.31
In Stock
Whirlpool Washer Drain Pump Assembly
PartSelect Number PS12731241
Manufacturer Part Number W11399437
The Whirlpool drain pump assembly is an OEM part designed to ensure proper water drainage during the washer's drain cycle. Compatible with select models from Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef, this durable component is easy to install and built to last. To guarantee proper fit and performance, verify compatibility before ordering. Always unplug the washer and wear gloves during installation for safety.
Fixes these symptoms
- Draining Issues
- Will not drain
- See more...
Your Price
$94.63
In Stock
Whirlpool Washer Drain Pump
Tip washer back up, use the putty knife to pop the top cover up (clips are about 6.5in in from sides). Unclip the white plastic cover over the outer and inner tubs. Pop the center cap from inside the inner tub, exposing the bolt holding the inner tub down. Remove bolt, pull inner tub up and out.
At bottom of outer tub remove 2 screws from drain access cover, should find some change under there (or in the pump).
Re-assemble using new pump.
Note:
Before new pump arrived I was able to use some silicone sealant, epoxy, and black tape to temporarily fix the cracked pump housing after pulling it out. Read more...
PartSelect Number PS5136124
Manufacturer Part Number W10536347
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
Fixes these symptoms
- Draining Issues
- Leaking
- Will not drain
- See more...
Installation Instructions
ROBERT from BARRINGTON, IL
Loose change entered drain pump, cracked housing leaked all water out
Disconnect power, hot/cold supply and drain hose. Tip washer onto front side, expect some additional water to leak out. Remove the cracked drain pump, 3 screws, hose clamps, and electrical plug.Tip washer back up, use the putty knife to pop the top cover up (clips are about 6.5in in from sides). Unclip the white plastic cover over the outer and inner tubs. Pop the center cap from inside the inner tub, exposing the bolt holding the inner tub down. Remove bolt, pull inner tub up and out.
At bottom of outer tub remove 2 screws from drain access cover, should find some change under there (or in the pump).
Re-assemble using new pump.
Note:
Before new pump arrived I was able to use some silicone sealant, epoxy, and black tape to temporarily fix the cracked pump housing after pulling it out. Read more...
Your Price
$123.20
In Stock
Whirlpool Washer Pump-water
PartSelect Number PS16218041
Manufacturer Part Number W11458345
This water pump assembly is a genuine OEM replacement part designed for use with washing machines. The pump is responsible for removing water from the washer during the drain portion of the cycle, ensuring that water is expelled efficiently so that the machine can complete its wash cycle. If your washing machine is failing to drain water properly, it could be due to a faulty or clogged pump. Replacing this part will restore the washer’s drainage function and help maintain the washing machine's performance.
Fixes these symptoms
- Draining Issues
- Will not drain
- See more...
Related Whirlpool Washer Parts
- All Whirlpool Washer parts
- Whirlpool Washer Agitators
- Whirlpool Washer Bearings
- Whirlpool Washer Belts
- Whirlpool Washer Brackets and Flanges
- Whirlpool Washer Caps and Lids
- Whirlpool Washer Circuit Boards and Touch Pads
- Whirlpool Washer Dispensers
- Whirlpool Washer Doors
- Whirlpool Washer Drawers and Glides
- Whirlpool Washer Drums and Tubs
- Whirlpool Washer Electronics
- Whirlpool Washer Elements and Burners
- Whirlpool Washer Filters
- Whirlpool Washer Handles
- Whirlpool Washer Handles and Latches
- Whirlpool Washer Hardware
- Whirlpool Washer Hinges
- Whirlpool Washer Hoses and Tubes
- Whirlpool Washer Knobs
- Whirlpool Washer Latches
- Whirlpool Washer Legs and Feet
- Whirlpool Washer Lights and Bulbs
- Whirlpool Washer Motors
- Whirlpool Washer Panels
- Whirlpool Washer Power Cords
- Whirlpool Washer Pulleys
- Whirlpool Washer Seals and Gaskets
- Whirlpool Washer Sensors
- Whirlpool Washer Springs and Shock Absorbers
- Whirlpool Washer Switches
- Whirlpool Washer Timers
- Whirlpool Washer Transmissions and Clutches
- Whirlpool Washer Valves
- Whirlpool Washer Wheels and Rollers
- Whirlpool Washer Wire Plugs and Connectors