Whirlpool Washer Caps and Lids

Your Price

$260.96

Whirlpool Washer Lid

★★★★★

21 Reviews

PartSelect Number PS12584356

Manufacturer Part Number W11259006

This lid is for washers. The lid covers the washer tub opening. Wear work gloves to protect your hands when installing this part.

Fixes these symptoms

Lid or door won’t close
Locking Issues
See more...

Installation Instructions

Greg from RICHMOND, VA

Broken lid frame at left hinge.

Raised lid to remove two Torx head screws from each hinge. Lid will then lift off of hinges. Installation of new lid was the reverse of the removal procedure. It is best to install one hinge to the lid by removing that hinge from the washer. The lid can then be installed by inserting that hinge into it's spot and then over the other hinge. Install the hinge screws into the second hinge and the job is complete. The lid now closes properly allowing the automatic lid lock to function properly. Read more...

Videos!

Your Price

$16.74

Whirlpool Washer Agitator Cap Barrier W/seal

★★★★★

12 Reviews

PartSelect Number PS11748113

Manufacturer Part Number WPW10074580

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
Marks left on clothes
See more...

Installation Instructions

Kevin from Everett, WA

upper portion of 2-piece agitator didn't spin

Popped the agitator cap with a flathead screwdriver. Removed the dust cap, tearing the o-ring in the process. Removed the bolt that holds the agitator in place, removed the whole agitator. Pulled the top portion of the agitator off, removed the dog housing and all pieces of the broken dog pieces. Replaced them, and put it all back together in reverse order. Pretty straight forward repair. Works great! Read more...

Your Price

$18.95

Whirlpool Washer Dryer Cap

★★★★★

1 Review

PartSelect Number PS11750408

Manufacturer Part Number WPW10208398

This is a dryer door hinge cap, also known as a bushing, which is a durable plastic cap that is installed on the door hinge and is used to allow your dryer door to operate smoothly when opening and closing. If the door for your dryer is not properly opening and closing, this cap needs to be replaced immediately. To replace this door hinge bushing, you will need a screwdriver to remove and disassemble the door for your dryer. This door hinge bushing is sold individually, but normally wears at the same rate as the others within your dryer door, so order as many as are needed.

Fixes these symptoms

Door Sags
Door won’t close
Lid or door won’t close
See more...

Videos!

Your Price

$191.57

Whirlpool Washer Glass Lid Upper

★★★★★

2 Reviews

PartSelect Number PS12074659

Manufacturer Part Number W11102314

The Whirlpool washer lid is an OEM replacement part designed to fit select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef washing machines. This durable lid covers the washer tub opening, preventing debris and leaks while ensuring safe operation. Damaged or cracked lids can impact washer performance. For proper installation, wear work gloves and refer to your owner’s manual to confirm compatibility.

Fixes these symptoms

Lid or door won’t close
See more...

Your Price

$208.07

Whirlpool Washer Lid Assembly

★★★★★

3 Reviews

PartSelect Number PS12070901

Manufacturer Part Number W11101059

This lid assembly is for washers and covers the washer tub opening. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.

Fixes these symptoms

Lid or door won’t close
See more...

Installation Instructions

Jonathan from HELENA, AL

Replace Cracked Whirlpool Cabrio Washing Machine Lid

This is a very simple repair. My lid was severely cracked on the back left corner where there seems to be a lot of pressure/torque required to shut the lid. There is a metal L-shaped "tab" that inserts into the lid on both sides of the back edge of the lid. The lid is attached to these metal tabs with two screws for each side. My cracked lid had resulted in the lid breaking off of the metal tab with the screws still anchored into the metal tab.

Make sure screws have been removed from the metal tabs on both sides. Do not remove metal tabs- leave them attached to the washing maching (otherwise, you will not be able to attach the lid back onto the machine). Slide the lid over the tabs. There are square-shaped spaces along the edge of the lid where the tabs slide into the lid. Re-screw the screws into the lid, attaching the lid to the tabs through pre-drilled holes on the sides of the lid. It may take a little time to make sure the screws are properly inserted into the lid and tab screw holes. Tighten up and you're finished. Read more...

Your Price

$260.05

Whirlpool Washer Lid

★★★★★

3 Reviews

PartSelect Number PS12584340

Manufacturer Part Number W11256781

This genuine OEM lid is specially designed for use with top load washing machines. The lid is responsible for covering the washer tub. It ensures that water and detergent do not leak out of the machine, and it protects the internal components of the washer as well. If the lid is damaged, worn down, or no longer able to stay closed, you may notice difficulties starting or stopping the washer, excessive leaking, and unusual noise when the washer is running. To avoid injury and potential damage to the washer, it is best not to use the washer if the lid is not functioning properly.

Fixes these symptoms

Lid or door won’t close
See more...

Your Price

$6.95

Whirlpool Washer Cap

★★★★★

1 Review

PartSelect Number PS11775336

Manufacturer Part Number W11050804

Installation Instructions

David from LAKEWOOD, CA

Non agitator pulsating action ceased

Ordered the parts and followed You Tube DYI clip. This 3YOMaytag top loading washer has had a motherboard replaced and now this. It all works fine for now, I cannot imagine what the appliance tech would have charged. Maytag is not what it used to be. Read more...

Your Price

$260.05

Whirlpool Washer Glass Lid

PartSelect Number PS12347533

Manufacturer Part Number W11130236

The Whirlpool Genuine OEM Washer Glass Lid is black in color and covers the washer tub opening for a top load washer

Fixes these symptoms

Lid or door won’t close
See more...

Your Price

$27.95

Whirlpool Washer Shield

★★★★★

3 Reviews

PartSelect Number PS11754637

Manufacturer Part Number WPW10427633

Installation Instructions

Roland from SPRINGTOWN, TX

nut loosened from pully, belt cut into shield and came off

removed shield and pully nut and replaced shifter pulley and belt.
rolled it around several times to see how it stayed on or not, it stayed
. I replaced the new shield put the washer upright and tested fine. Read more...