Haier Parts
Popular Haier Parts
Your Price
$19.70
In Stock
Haier LOWER SPRAY ARM
There is a ring on the part that tightens clockwise to the nipple that sprays out the water that it rests on. Twist clockwise and you are done!
It is a mystery how it was unattached to begin with but not a problem in the end, it was easy to fix!
Thanks for sending genuine GE parts! Read more...
PartSelect Number PS17137081
Manufacturer Part Number WD22X33499
This lower spray arm assembly in your dishwasher distributes water and detergent during the washing cycle by spinning around and spraying water in different directions. You can usually find it attached to a support or hub at the bottom of the dishwasher. If this part is broken, you might notice some signs. You might hear a knocking or banging sound coming from the dishwasher. The spray arm may not rotate properly or might seem wobbly. It is important to replace a damaged arm assembly as your dishes will not get cleaned properly, and they will still have dirt on them even after a wash cycle. It can also cause the dishwasher to have a bad smell because of leftover food residue. To remove your existing arm assembly, you will need to release its locking mechanism before lifting it out of your appliance. Please be informed that this OEM-verified part is sold individually.
Fixes these symptoms
- Leaking
- Noisy
- Not cleaning dishes properly
- See more...
Installation Instructions
Mark De from BRONX, NY
Spray arm had become unattached and burned by the heat element
It was a simple as: attach and done! There is a ring on the part that tightens clockwise to the nipple that sprays out the water that it rests on. Twist clockwise and you are done!
It is a mystery how it was unattached to begin with but not a problem in the end, it was easy to fix!
Thanks for sending genuine GE parts! Read more...
Your Price
$13.11
In Stock
Haier LOWER RACK ROLLER
PartSelect Number PS16217024
Manufacturer Part Number WD12X26146
This is a lower rack roller for your dishwasher. It attaches in the lower roller assembly on the bottom of your rack to allow the rack to smoothly slide in and out. This replacement part is 1.5 inches in diameter and is charcoal in color. There are four rollers in total, please consider replacing your other rollers at the same time as they may be wearing at the same rate. Sold individually.
Installation Instructions
Dennis from CICERO, IN
Your Price
$74.96
In Stock
Haier Upper Rack Assembly
PartSelect Number PS16618975
Manufacturer Part Number WD28X30219
This dishrack is for dishwashers. The dishrack holds the dishes in place during the dishwashing cycle. Follow the instructions in the manual when installing this part.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Cooke, from STAMFORD, CT
Racks were rusted
Terrible! Bottom rack was wrong... original was discontinued. Fork and knife holder did not fit in original location. Parts company new this and still processed the order! Disaster!
Read more...
Your Price
$44.19
In Stock
Haier Door Latch
2. Open dishwasher door
3. Unscrew the screws that secure the dishwasher to the counter.
4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch.
5. On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside.
6. Remove old door latch.
7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in.
8. Plug wire harness into new door latch.
9. Re-align dishwasher and re-secure to counter in previous position.
10. Test latch to make sure it closes properly.
11. Turn on breaker in electrical panel.
The dishwasher should now function properly. Read more...
PartSelect Number PS6447681
Manufacturer Part Number WD21X10490
This is replacement door latch for your dishwasher. The door latch is attached to the tub frame, and connects to the door strike to keep your dishwasher door closed during operation. If you have a broken or faulty door latch, your dishwasher door may not stay closed, and this can prevent the dishwasher from running. This item is sold individually, and if your door strike is also damaged, you will need to replace that part separately. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Will Not Start
- See more...
Installation Instructions
James from ALBRIGHTSVLLE, PA
Door latch not functioning
1. Turn off breaker supplying power to dishwasher in electrical panel2. Open dishwasher door
3. Unscrew the screws that secure the dishwasher to the counter.
4. Tip dishwasher forward. Identify the non-functioning door latch. It looks exactly like the replacement. Unclip the wire harness from the door latch.
5. On the inside of the dishwasher, there are 2 screws directly under the door latch. Unscrew them and carefully set aside.
6. Remove old door latch.
7. Set new door latch in place. Holding securely, replace screws removed in step 5. Toward the end they get a little tougher to screw in.
8. Plug wire harness into new door latch.
9. Re-align dishwasher and re-secure to counter in previous position.
10. Test latch to make sure it closes properly.
11. Turn on breaker in electrical panel.
The dishwasher should now function properly. Read more...
Your Price
$22.49
In Stock
Haier MID SPRAY ARM
Unscrewed counter clockwise old sprayer arms and lifted. Replaced with new sprayer arms and noise disappeared. Read more...
PartSelect Number PS17137080
Manufacturer Part Number WD22X33498
This OEM mid spray or center wash arm assembly distributes water and detergent in your dishwasher during the wash cycle. It has small nozzles that spray water onto your dishes and is located between the lower and upper rack. A broken assembly will result in weak water flow and ineffective dishwashing. It may also display signs of damage such as cracks, breaks, or missing nozzles. Additionally, a malfunctioning assembly can cause imbalanced water flow, potentially leading to damage to other dishwasher components such as filters or pumps. Prompt replacement is necessary to ensure proper dishwashing performance and prevent further damage. To install this to your appliance, you will need to snap its mounting bracket onto the rack before attaching the arms onto it. This replacement part is sold individually.
Fixes these symptoms
- Noisy
- Not cleaning dishes properly
- See more...
Installation Instructions
James from DELAND, FL
Knocking sound during wash cycle
Replace all three spray arms and knocking sound disappeared.Unscrewed counter clockwise old sprayer arms and lifted. Replaced with new sprayer arms and noise disappeared. Read more...
Your Price
$22.43
In Stock
Haier ROLLER CARRIER
PartSelect Number PS16226065
Manufacturer Part Number WD12X28078
This part is the replacement carrier roller for your dishwasher. It is also known as the wheel support. It is made of gray plastic and is approximately 5 inches by 2 inches. The carrier roller supports the wheels on your upper dish rack so it can slide in and out of the dishwasher efficiently. This roller is for the right side of the dish rack, the left side is sold separately. Because it is made of plastic, the roller can occasionally crack and break, and when this occurs, it will need to be replaced. If you notice that your dish rack is having difficulty sliding in and out, you should check to see if the roller is damaged. This is an OEM part from the manufacturer and it is sold individually.
Installation Instructions
Dennis from CICERO, IN
Your Price
$13.11
In Stock
Haier Burner Grate Foot
PartSelect Number PS11729077
Manufacturer Part Number WB02X24790
This burner grate foot, also known as a bumper, is an authentic OEM replacement part for your range. It is a small black rubber component that acts as a buffer between the metal grate and the surface of the cooktops to prevent scratches and damage to the cooktop. It also stabilizes the burner grate and prevents it from shifting or sliding, which reduces the risk of accidents or spills. These small components can easily fall and become lost while cleaning or wear down over time. Inspect each of the feet and ensure that you order the correct amount for your range. Each burner grate foot is sold separately.
Installation Instructions
Irene H from HENRICO, VA
Your Price
$17.00
In Stock
Haier GASKET TUB Stainless Steel
PartSelect Number PS11721490
Manufacturer Part Number WD08X22095
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
Marty from TRAVERSE CITY, MI
Dishwasher leaking from the bottom of the door.
Process of elimination and a visit to my local repair store told me it was wise to try the tub gasket, and according to partselect.com, it solved the problem a majority of the time. My local repair dealer agreed: Try it. They agreed because for them to replace a lower door gasket AND the $10 tub gasket... if they came out, the service call and parts would equal half the cost to replace the whole dishwasher. So I bought a tub gasket from partselect.com and replaced the old one. It worked, it was easy, so if your same make & model is leaking? Try it first. That's my advice.
Read more...
Your Price
$8.56
In Stock
Haier Light Switch
PartSelect Number PS8758429
Manufacturer Part Number WR23X10725
The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the switch. The switch is spring loaded and is a generally closed type of switch meaning there should be no continuity when the button is depressed, and continuity through the switch when the button is not depressed. This plastic, white, OEM switch is sourced directly from the manufacturer, is sold individually and is easy to replace. The repair usually takes less than 15 minutes and requires a flat blade screwdriver and needle nose pliers.
Fixes these symptoms
- Fridge too warm
- Light not working
- See more...
Installation Instructions
Jonathan from Lilburn, GA
Sticking Light Switch
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
Read more...
Your Price
$14.70
In Stock
Haier Rack Carrier Kit - Right or Left side
PartSelect Number PS16219735
Manufacturer Part Number WD28X27241
This part is the replacement carrier roller for your dishwasher. It is also known as the wheel support. It is made of gray plastic and is approximately 5 inches by 2 inches. The carrier roller supports the wheels on your upper dish rack so it can slide in and out of the dishwasher efficiently. This part has been redesigned by the manufacturer. This part can now be used on the right or left side of the rack. Because it is made of plastic, the roller can occasionally crack and break, and when this occurs, it will need to be replaced. If you notice that your dish rack is having difficulty sliding in and out, you should check to see if the roller is damaged. This is an OEM part from the manufacturer and it is sold individually. The roller itself, is replacement part number WD12X26146. The cover is no longer needed when replacing the rack carrier kit.
Installation Instructions
Teri from LAGUNA NIGUEL, CA
order #16343054 Complete service rack
this was ordered 4-9-21 and I have yet to receive it. Its difficult to explain the installation when you haven't received the main part. I paid for this but you have not shipped it. Very poor customer service.
Read more...
Haier Appliance Types
- Haier Oven Parts
- Haier Stove Parts
- Haier Air Conditioner Parts
- Haier Ice Maker Parts
- Haier Dehumidifier Parts
- Haier Dishwasher Parts
- Haier Dryer Parts
- Haier Freezer Parts
- Haier Ice Maker Parts
- Haier Microwave Parts
- Haier Range Parts
- Haier Refrigerator Parts
- Haier Washer Dryer Combo Parts
- Haier Washer Parts
- Haier Wine and Beverage Cooler Parts
- Haier Fridge Parts
Popular Haier Models
Below are the most popular Haier models we have. Enter your model number in the search box to find your model.
- A112 Compact Refrigerator
- HT21TS85SP Haier Refrigerator Model HT21TS85SP Parts
- RDE350AW
- HT21TS80SP Haier Refrigerator Model HT21TS80SP Parts
- HLC1700AXW LAUNDRY CENTER
- HA10TG21BSW Top-Mount Refrigerator
- HT18TS45SB Haier Refrigerator Model HT18TS45SB Parts
- HRT18R1APW REFRIGERATOR
- HMV1630DBWW Haier Microwave Model HMV1630DBWW Parts
- HMV1630SBSS Haier Microwave Model HMV1630SBSS Parts
- HT18TS45SW Haier Refrigerator Model HT18TS45SW Parts
- RWT350AW
- HBF05EBSS
- HSB03
- QHE16HYPAFS Refrigerator
- HLP23E WASHER
- HWF05XC7
- GWT460AW WASHER
- HRT18R1AWW Haier Refrigerator Model HRT18R1AWW Parts
- HWR05XCML Haier Air Conditioner Model HWR05XCML Parts
