Popular Cultivator Parts

Your Price
$4.99
   In Stock
Cultivator Rubber Gear Cap
PartSelect Number PS11868360
Manufacturer Part Number 562408002
Your Price
$3.99
   In Stock
Cultivator Clevis Pin
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9009427
Manufacturer Part Number 532132673
This clevis pin is an OEM replacement part that is compatible with various makes and models of tiller and is sold as an individual part. The purpose of this pin is to snap or break under a certain amount of pressure if your tiller is jammed, to protect the more valuable components of your tiller. Measuring at approximately 2-inches long and made of high-quality metal, replacing this pin should only require pliers to swap out the old pin for the new.
Your Price
$4.99
   In Stock
Cultivator Sleeve
PartSelect Number PS9997616
Manufacturer Part Number 692512002
Sleeves, also known as tool holders/adapters, are used to allow you to connect other accessories to a multi-tool, holding and securing them in the process. This sleeve has an approximately 3/4-inch outer diameter and 1/4-inch inner diameter/bore and is compatible with different models of multi-tool. Because this part is a high-use part, it is recommended that you order multiple to avoid running out in the future. To avoid having to replace it as often, make sure to clean the sleeve after each use and handle it with care. If you notice high wear on the sleeve or have difficulty keeping attachments connected, it likely needs to be replaced. To replace it, you may need an Allen wrench, screwdriver or other tools.
Installation Instructions
Edward from ROSAMOND, CA
lost parts
ordered parts and installed Read more...
Your Price
$3.99
   In Stock
Cultivator Air Filter
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9117898
Manufacturer Part Number 753-05996
Your Price
$5.20
   In Stock
Cultivator Adapter Blade
PartSelect Number PS9997610
Manufacturer Part Number 692496002
Your Price
$13.22
   In Stock
Cultivator Jaw Insert (3/4 In)
PartSelect Number PS16390336
Manufacturer Part Number 643492001
Your Price
$6.63
   Special Order
Cultivator Bushing
PartSelect Number PS11804637
Manufacturer Part Number 125-5196
Your Price
$11.83
   In Stock
Cultivator Throttle Cable
PartSelect Number PS11985254
Manufacturer Part Number 753-06831
Installation Instructions
David from WINSTON SALEM, NC
replaced old belt
took cover off and replace belt Read more...
Your Price
$13.69
   In Stock
Cultivator Belt, V
★★★★★
★★★★★
1 Review
PartSelect Number PS17016528
Manufacturer Part Number 591372401
Belt, V
Your Price
$6.03
   In Stock
Cultivator Oil Seal
PartSelect Number PS9273710
Manufacturer Part Number 253-154
This oil seal is an OEM replacement part designed to prevent oil from leaking from the engine or gearbox while keeping contaminants from entering. It is used in various lawn mowers where it ensures that the moving parts in the mower remain adequately lubricated and protected from dirt/debris. The oil seal can wear down due to aging, heat, pressure, or improper installation. If the seal is no longer functioning oil will leak, the engine will overheat, and its internal components will wear down due to excessive friction. Use seal pullers to remove the seal from its housing on the engine crankshaft or transmission housing. Clean the surrounding area using a cloth or soft brush to prevent contamination and ensure a good seal. Apply oil to the lip of the new seal and firmly press into position until it is flush against the sealing surface. Once you have completed the repair, run the lawn mower to check that there are no longer any leakage or performance issues.

Cultivator Brands

Popular Cultivator Models

Below are the most popular Cultivator models we have. Enter your model number in the search box to find your model.