Lawn Tractor Parts
Popular Lawn Tractor Parts
Your Price
$17.09
In Stock
Your Price
$6.21
In Stock
Lawn Tractor Bearing
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS9006914
Manufacturer Part Number 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft. Over time, the part may become worn and damaged, which you will notice if you experience a squealing or grinding sound from the wheel in question, or you notice the wheel is sloppy on the shaft.
You will need a hammer and punch to complete this repair, which most of our customers rated as easy. Make sure you tap the new bearing into place evenly inside the tire rim.
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$17.95
On Order
Your Price
$3.99
On Order
Lawn Tractor Ring Klip Number T5304-75
PartSelect Number PS9143890
Manufacturer Part Number 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read more...
Your Price
$3.99
In Stock
Lawn Tractor Cap Axle Black 1 50 x 1 00
PartSelect Number PS9007667
Manufacturer Part Number 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage.
This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read more...
Your Price
$21.00
In Stock
Your Price
$12.44
On Order
Your Price
$4.99
In Stock
Lawn Tractor Extension Spring
PartSelect Number PS12608566
Manufacturer Part Number 587358401
spring.extn.42.fcs.tr.deck.drv
Your Price
$3.99
On Order
Lawn Tractor Washer 25/32 x 1-1/4 x 16 Ga.
PartSelect Number PS9008998
Manufacturer Part Number 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number to confirm this is the washer you need for your equipment.
This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.
Installation Instructions
Frederick from BINGHAMTON, NY
Your Price
$3.99
In Stock
Lawn Tractor Clip, Hairpin
PartSelect Number PS9007536
Manufacturer Part Number 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1.5 inches long. The clip acts as a fastener to prevent the moving parts from loosening and falling off during usage. The clip is vulnerable to corrosion and general wear over time. However, it can also fail prematurely due to overloading and excessive stress. A damaged hairpin clip will result in misalignment of parts, accidental disassembly, increased friction and wear, and potential harm to the user. Remove the faulty pin and align the new one with the insertion points. Ensure that the pin is securely fitted in its appropriate slot and compress the ends to prevent it from dislodging.
Lawn Tractor Brands
- Ariens Lawn Tractor Parts
- Bolens Lawn Tractor Parts
- Craftsman Lawn Tractor Parts
- Cub Cadet Lawn Tractor Parts
- Honda Lawn Tractor Parts
- Husky Lawn Tractor Parts
- Husqvarna Lawn Tractor Parts
- Jonsered Lawn Tractor Parts
- Lawn Boy Lawn Tractor Parts
- MTD Lawn Tractor Parts
- Murray Lawn Tractor Parts
- Poulan Lawn Tractor Parts
- Ryobi Lawn Tractor Parts
- Simplicity Lawn Tractor Parts
- Snapper Lawn Tractor Parts
- Toro Lawn Tractor Parts
- Troy-Bilt Lawn Tractor Parts
- Weed Eater Lawn Tractor Parts
- Yard Machines Lawn Tractor Parts
- Yard Man Lawn Tractor Parts
Related Lawn Tractor Parts
- Lawn Tractor Bearings
- Lawn Tractor Belts
- Lawn Tractor Blades
- Lawn Tractor Brackets and Flanges
- Lawn Tractor Caps and Lids
- Lawn Tractor Carburetors
- Lawn Tractor Deflectors and Chutes
- Lawn Tractor Dipsticks
- Lawn Tractor Engines
- Lawn Tractor Fans and Blowers
- Lawn Tractor Filters
- Lawn Tractor Fuses
- Lawn Tractor Gears
- Lawn Tractor Grilles and Kickplates
- Lawn Tractor Handles
- Lawn Tractor Hardware
- Lawn Tractor Hinges
- Lawn Tractor Hoses and Tubes
- Lawn Tractor Ignitions
- Lawn Tractor Knobs
- Lawn Tractor Latches
- Lawn Tractor Lights and Bulbs
- Lawn Tractor Manuals and Literature
- Lawn Tractor Panels
- Lawn Tractor Pedals
- Lawn Tractor Pulleys
- Lawn Tractor Seals and Gaskets
- Lawn Tractor Seats
- Lawn Tractor Spark Plugs
- Lawn Tractor Spindles
- Lawn Tractor Springs and Shock Absorbers
- Lawn Tractor Starters
- Lawn Tractor Switches
- Lawn Tractor Tanks and Containers
- Lawn Tractor Transmissions and Clutches
- Lawn Tractor Valves
- Lawn Tractor Wheels and Rollers
- Lawn Tractor Wire Plugs and Connectors
Popular Lawn Tractor Models
Below are the most popular Lawn Tractor models we have. Enter your model number in the search box to find your model.
- YTH21K46 Yth21k46 - 96043012000 (2010-11)
- YTH21K46 Yth21k46 - 96045002900 (2010 - 11)
- YTH21K46 Yth21k46 - 96045002602 (2011-08)
- YTH21K46 Yth21k46 - 96045002902 (2011-08)
- YTH21K46 Yth21k46 - 96043012300 (2010 - 11)
- YTH21K46 Yth21k46 - 96043012301 (2011-08)
- YTH21K46 Yth21k46 - 96043012001 (2011-01)
- YTH21K46 Yth21k46 - 96043012002 (2011-07)
- YTH21K46 Yth21k46 - 96048000900 (2010-12)
- YTH21K46 Lawn Tractor
- YTH21K46 Yth21k46 - 96045002601 (2011-02)
- 665 Lawn Tractor
- 665 Lawn Tractor
- WE261 , 96024000100, 96022000700
- WE261 , 96024000100, 96022000700
- WE261 Lawn Tractor
- WE261 Lawn Tractor
- WE261 Weed Eater Lawn Tractor
- WE261 Weed Eater Lawn Tractor
- WE261 Weed Eater Lawn Tractor
