Husqvarna Lawn Tractor Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Husqvarna Lawn Tractor Parts
Your Price
$6.15
In Stock
Your Price
$9.18
In Stock
Husqvarna Lawn Tractor Lawn Mower Flange Wheel Bearing
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS9006914
Manufacturer Part Number 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft. Over time, the part may become worn and damaged, which you will notice if you experience a squealing or grinding sound from the wheel in question, or you notice the wheel is sloppy on the shaft.
You will need a hammer and punch to complete this repair, which most of our customers rated as easy. Make sure you tap the new bearing into place evenly inside the tire rim.
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$5.95
In Stock
Husqvarna Lawn Tractor Lawn Mower Ring Clip
PartSelect Number PS9143890
Manufacturer Part Number 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read more...
Your Price
$24.40
In Stock
Husqvarna Lawn Tractor Mulching Plug
PartSelect Number PS16374898
Manufacturer Part Number 586922701
This mulching plug from the renowned brand Husqvarna is a crucial component for lawn mowers. Its main function when installed into the grass-discharge chute is to convert your standard lawn mower into a mulching machine, promoting healthier and more fertile grass. Be sure to wear work gloves during the installation process to safeguard your hands, assuring a safe and efficient installation. With its high efficiency (EFF), this mulch plug is designed to offer excellent performance for maintaining your yard. It is recommended for those who prioritize lawn health, as mulching returns nutrients back to the soil. Make your lawn care chores easier and fruitful with this Husqvarna mulching plug.
Your Price
$5.95
In Stock
Husqvarna Lawn Tractor Lawn Mower Axle Hub Cap
PartSelect Number PS9007667
Manufacturer Part Number 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage.
This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read more...
Your Price
$3.99
On Order
Husqvarna Lawn Tractor Lawn Mower Washer
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest. Read more...
PartSelect Number PS9008998
Manufacturer Part Number 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number to confirm this is the washer you need for your equipment.
This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.
Installation Instructions
Trace from LISLE, IL
Needed to replace the bent blades on my riding mower.
- Made the mower safe to work on the blades (remove spark plug wires, etc.)- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest. Read more...
Your Price
$19.09
In Stock
Husqvarna Lawn Tractor Lawn Mower High Lift Blade
PartSelect Number PS9286056
Manufacturer Part Number 532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.
Installation Instructions
Frederick from BINGHAMTON, NY
Your Price
$31.83
In Stock
Husqvarna Lawn Tractor Lawn Mower Grassbag Frame
PartSelect Number PS11824788
Manufacturer Part Number 585054702
Your Price
$4.99
In Stock
Husqvarna Lawn Tractor Washer 5/16 Std Flt
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS16381824
Manufacturer Part Number 596134901
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$58.37
In Stock
Husqvarna Lawn Tractor Mandrel Assembly
PartSelect Number PS12087499
Manufacturer Part Number 587819701
Husqvarna Lawn Tractor Appliance Types
Related Husqvarna Lawn Tractor Parts
- Husqvarna Lawn Tractor Agitators
- Husqvarna Lawn Tractor Bags
- Husqvarna Lawn Tractor Bearings
- Husqvarna Lawn Tractor Belts
- Husqvarna Lawn Tractor Blades
- Husqvarna Lawn Tractor Brackets and Flanges
- Husqvarna Lawn Tractor Caps and Lids
- Husqvarna Lawn Tractor Carburetors
- Husqvarna Lawn Tractor Control Cables
- Husqvarna Lawn Tractor Deflectors and Chutes
- Husqvarna Lawn Tractor Dipsticks
- Husqvarna Lawn Tractor Doors
- Husqvarna Lawn Tractor Engines
- Husqvarna Lawn Tractor Exhausts
- Husqvarna Lawn Tractor Fans and Blowers
- Husqvarna Lawn Tractor Filters
- Husqvarna Lawn Tractor Fuses
- Husqvarna Lawn Tractor Gears
- Husqvarna Lawn Tractor Grilles and Kickplates
- Husqvarna Lawn Tractor Handles
- Husqvarna Lawn Tractor Hardware
- Husqvarna Lawn Tractor Hoses and Tubes
- Husqvarna Lawn Tractor Ignitions
- Husqvarna Lawn Tractor Knobs
- Husqvarna Lawn Tractor Latches
- Husqvarna Lawn Tractor Lights and Bulbs
- Husqvarna Lawn Tractor Manuals and Literature
- Husqvarna Lawn Tractor Motors
- Husqvarna Lawn Tractor Panels
- Husqvarna Lawn Tractor Pedals
- Husqvarna Lawn Tractor Pulleys
- Husqvarna Lawn Tractor Pumps
- Husqvarna Lawn Tractor Seals and Gaskets
- Husqvarna Lawn Tractor Seats
- Husqvarna Lawn Tractor Sensors
- Husqvarna Lawn Tractor Shear Pins
- Husqvarna Lawn Tractor Spindles
- Husqvarna Lawn Tractor Springs and Shock Absorbers
- Husqvarna Lawn Tractor Starters
- Husqvarna Lawn Tractor Switches
- Husqvarna Lawn Tractor Tanks and Containers
- Husqvarna Lawn Tractor Transformers
- Husqvarna Lawn Tractor Transmissions and Clutches
- Husqvarna Lawn Tractor Trays and Shelves
- Husqvarna Lawn Tractor Trim
- Husqvarna Lawn Tractor Valves
- Husqvarna Lawn Tractor Wheels and Rollers
- Husqvarna Lawn Tractor Wire Plugs and Connectors
Popular Husqvarna Lawn Tractor Models
Below are the most popular Husqvarna Lawn Tractor models we have. Enter your model number in the search box to find your model.
- YTH21K46 Yth21k46 - 96045002601 (2011-02)
- YTH21K46 Yth21k46 - 96043012002 (2011-07)
- YTH21K46 Lawn Tractor
- YTH21K46 Yth21k46 - 96045002602 (2011-08)
- YTH21K46 Yth21k46 - 96045002900 (2010 - 11)
- YTH21K46 Yth21k46 - 96048000900 (2010-12)
- YTH21K46 Yth21k46 - 96043012300 (2010 - 11)
- YTH21K46 Yth21k46 - 96045002902 (2011-08)
- YTH21K46 Yth21k46 - 96043012001 (2011-01)
- YTH21K46 Yth21k46 - 96043012301 (2011-08)
- YTH21K46 Yth21k46 - 96043012000 (2010-11)
- WE261 , 96024000100, 96022000700
- WE261 , 96024000100, 96022000700
- RZ4623 Rz 4623, 967009802-02, 2013-05
- YTH22V46 Yth22v46 - 96043018100 (2013-09)
- YTH22V46 Yth22v46 - 96045006200 (2017-06)
- YTH22V46 Yth22v46 - 96045004800 (2013-09)
- YTH22V46 Yth22v46 - 96043016200 (2012-09)
- YTH22V46 Yth22v46 - 96045004500 (2013-08)
- YTH22V46 Yth22v46 - 96045006100 (2017-06)