Ariens Lawn Tractor Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Ariens Lawn Tractor Parts
Ariens Lawn Tractor Lawn Mower Ring Clip
PartSelect Number PS9143890
Manufacturer Part Number 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read more...
Ariens Lawn Tractor Lawn Mower Axle Hub Cap
PartSelect Number PS9007667
Manufacturer Part Number 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage.
This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read more...
Ariens Lawn Tractor Lawn Mower High Lift Blade
PartSelect Number PS9286056
Manufacturer Part Number 532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.
Installation Instructions
Frederick from BINGHAMTON, NY
Ariens Lawn Tractor Lawn Mower Washer
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest. Read more...
PartSelect Number PS9008998
Manufacturer Part Number 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number to confirm this is the washer you need for your equipment.
This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.
Installation Instructions
Trace from LISLE, IL
Needed to replace the bent blades on my riding mower.
- Made the mower safe to work on the blades (remove spark plug wires, etc.)- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest. Read more...
Ariens Lawn Tractor Washer 5/16 Std Flt
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS16381824
Manufacturer Part Number 596134901
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Ariens Lawn Tractor Mandrel Assembly
PartSelect Number PS12087499
Manufacturer Part Number 587819701
Ariens Lawn Tractor Lawn Mower Hex Head Bolt
PartSelect Number PS9982804
Manufacturer Part Number 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is damaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Ariens Lawn Tractor Lawn Mower Blade Bolt And Washer Assembly
PartSelect Number PS9020856
Manufacturer Part Number 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
Ariens Lawn Tractor Lawn Mower Ignition Switch
PartSelect Number PS9020864
Manufacturer Part Number 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery and the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Russell from MACON, GA
Dryer runs no heat
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.
Read more...
Ariens Lawn Tractor Appliance Types
Related Ariens Lawn Tractor Parts
- Ariens Lawn Tractor Bearings
- Ariens Lawn Tractor Belts
- Ariens Lawn Tractor Blades
- Ariens Lawn Tractor Brackets and Flanges
- Ariens Lawn Tractor Caps and Lids
- Ariens Lawn Tractor Carburetors
- Ariens Lawn Tractor Circuit Boards and Touch Pads
- Ariens Lawn Tractor Control Cables
- Ariens Lawn Tractor Deflectors and Chutes
- Ariens Lawn Tractor Dipsticks
- Ariens Lawn Tractor Electronics
- Ariens Lawn Tractor Engines
- Ariens Lawn Tractor Exhausts
- Ariens Lawn Tractor Fans and Blowers
- Ariens Lawn Tractor Filters
- Ariens Lawn Tractor Fuses
- Ariens Lawn Tractor Grilles and Kickplates
- Ariens Lawn Tractor Hardware
- Ariens Lawn Tractor Hinges
- Ariens Lawn Tractor Hoses and Tubes
- Ariens Lawn Tractor Ignitions
- Ariens Lawn Tractor Knobs
- Ariens Lawn Tractor Latches
- Ariens Lawn Tractor Lights and Bulbs
- Ariens Lawn Tractor Manuals and Literature
- Ariens Lawn Tractor Pedals
- Ariens Lawn Tractor Pulleys
- Ariens Lawn Tractor Pumps
- Ariens Lawn Tractor Seals and Gaskets
- Ariens Lawn Tractor Seats
- Ariens Lawn Tractor Skid Shoes
- Ariens Lawn Tractor Spindles
- Ariens Lawn Tractor Springs and Shock Absorbers
- Ariens Lawn Tractor Starters
- Ariens Lawn Tractor Steering
- Ariens Lawn Tractor Switches
- Ariens Lawn Tractor Transmissions and Clutches
- Ariens Lawn Tractor Trays and Shelves
- Ariens Lawn Tractor Wheels and Rollers
- Ariens Lawn Tractor Wire Plugs and Connectors
Popular Ariens Lawn Tractor Models
Below are the most popular Ariens Lawn Tractor models we have. Enter your model number in the search box to find your model.
- 936056 46-Inch Hydro Tractor
- 936056 46-Inch Hydro Tractor
- 936056 46-Inch Hydro Tractor
- 936056 Hydro Tractor 46" Lawn Tractor
- 936056 46-Inch Hydro Tractor
- 936019 Sierra 1640H 40" Lawn Tractor
- 936019 Sierra 1540H 40" Lawn Tractor
- 93603700 Front-Engine Lawn Tractor
- 927046 RM1028E 10hp 28" Lawn Tractor
- 931033 18hp Garden Tractor
- 931033 18hp Garden Tractor
- 931033 GT 18hp Lawn Tractor
- 931033 (000101) 18hp Garden Tractor
- 915159 Zoom 42
- 915159
- 915159 Zoom 42
- 915159
- 915159 Zoom 42
- 927051 RM1332E 13hp 32" Lawn Tractor
- 93604200 Front-Engine Lawn Tractor