Husqvarna Cultivator Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Husqvarna Cultivator Parts
Your Price
$5.73
In Stock
Husqvarna Cultivator Tiller Clevis Pin
PartSelect Number PS9009427
Manufacturer Part Number 532132673
This clevis pin is an OEM replacement part that is compatible with various makes and models of tiller and is sold as an individual part. The purpose of this pin is to snap or break under a certain amount of pressure if your tiller is jammed, to protect the more valuable components of your tiller. Measuring at approximately 2-inches long and made of high-quality metal, replacing this pin should only require pliers to swap out the old pin for the new.
Your Price
$18.73
In Stock
Husqvarna Cultivator Belt, V
PartSelect Number PS17016528
Manufacturer Part Number 591372401
This genuine OEM replacement drive belt is designed for use with rotary lawn mowers and garden tillers, providing a reliable connection between the engine and the cutting or tilling mechanism. Made from high-quality, durable rubber, this belt is built to withstand regular outdoor use and is sold individually. Replacing the belt is a relatively simple task that requires only a screwdriver. To perform the repair, first disconnect the spark plug to ensure safety. Then, remove the belt cover to access the old belt. After removing the worn belt, install the new one in its place, secure the cover, and reconnect the spark plug. Always consult your equipment’s manual for model-specific guidance and safety precautions.
Installation Instructions
David from WINSTON SALEM, NC
Your Price
$37.72
In Stock
Your Price
$34.86
In Stock
Husqvarna Cultivator Tiller Clutch Cable
PartSelect Number PS9011918
Manufacturer Part Number 532159231
This clutch cable is designed for use with various models of tillers, and is constructed of metal, with a durable plastic insulation. The purpose of this cable is to control the primary drive function of your equipment, so when it is engaged, the tiller moves, and when it is disengaged, the tiller stays stationary. This cable is connected to a lever on the handlebar, and to a mechanism on the engine, with the cable acting as the connector. If your equipment has issues with engaging the clutch, or if the cable is frayed and damaged, the cable needs to be replaced. To replace this cable, use a screwdriver or wrench to disconnect it from the lever, before removing it from the engine mechanism. Then simply install the new one where the previous one was connected.
Your Price
$48.56
In Stock
Husqvarna Cultivator Tiller Throttle Control
Remove guard shield.
Remove old cable.
Install new cable.
Adjust throw on cable.
Put all parts back and test Read more...
PartSelect Number PS9014784
Manufacturer Part Number 532189482
Installation Instructions
David from SKANDIA, MI
Spring on clutch cable broke
Remove L. wheel.Remove guard shield.
Remove old cable.
Install new cable.
Adjust throw on cable.
Put all parts back and test Read more...
Your Price
$18.68
In Stock
Your Price
$6.21
In Stock
Husqvarna Cultivator Snow Blower Rivet
PartSelect Number PS9285897
Manufacturer Part Number 532126875
Your Price
$8.12
In Stock
Husqvarna Cultivator Tiller Lock Handle
PartSelect Number PS9007833
Manufacturer Part Number 532109229
Measuring approximately 1-inch in length, this handle lock is designed for use with various models of tiller machines. This handle lock is fastened to the base of the handle to secure the lock lever and is a genuine OEM metal part. This part is sold individually, so depending on your model, you may need 2 of them. Be sure to check your user manual or any diagrams for confirmation.
Your Price
$28.73
In Stock
Husqvarna Cultivator Tiller Bearing Kit
PartSelect Number PS9013186
Manufacturer Part Number 532165140
This OEM kit includes all the necessary hardware, including new bearings, oil and rubber seals, and rivets, to replace the tine shaft bearings on your tiller or cultivator. The tine shaft bearings support the tine shaft inside the gear case of your machine. If the bearings are damaged, you may experience rattling or squeaking noises, excessive vibrations, and difficulties in maneuvering. Uneven tilling or cultivating is a clear indication that the bearings need replacement. To locate and replace your tine shaft bearings, consult your user guide as they can be found on either side of the tine shaft. It is commonly found inside the gear case. You will need to remove any retaining rings holding the bearings in place with pliers or screwdriver. You may need to use a penetrating oil if the bearings are stubborn. Please note that this kit is sold separately from the tine shaft.
Your Price
$7.46
Special Order
Husqvarna Cultivator Trimmer Spirol Flared Pin
PartSelect Number PS9013175
Manufacturer Part Number 532164329
Husqvarna Cultivator Appliance Types
Related Husqvarna Cultivator Parts
- Husqvarna Cultivator Bearings
- Husqvarna Cultivator Brackets and Flanges
- Husqvarna Cultivator Control Cables
- Husqvarna Cultivator Hardware
- Husqvarna Cultivator Hinges
- Husqvarna Cultivator Latches
- Husqvarna Cultivator Seals and Gaskets
- Husqvarna Cultivator Springs and Shock Absorbers
- Husqvarna Cultivator Wheels and Rollers
Popular Husqvarna Cultivator Models
Below are the most popular Husqvarna Cultivator models we have. Enter your model number in the search box to find your model.
- 700DRT 700 Drt (2008-11)
- 700DRT 700 Drt (2009-01)
- 700DRT 700 Drt 96093000502, 2009-01
- 650RTT 650 Rtt - 96093000201 (2006-12)
- 650RTT 650 Rtt - 954329172 (2003-01)
- 650RTT 650 Rtt - 954329325 (2003-12)
- CRT51 Crt 51, 1995-03
- CRT51 Crt 51, 96091000205, 2008-11
- CRT51 Crt 51, Hecrt51m, 954170041, 2003-09
- CRT51 Crt 51, Hecrt51n, 954170041, 2004-01
- CRT51 Crt 51 - Hecrt51m (2003-09)
- CRT51 Crt 51 - Hecrt51n (2004-01)
- CRT51 Crt 51 - 96091000203 (2007-02)
- CRT51 Crt 51 - Hecrt51l (2003-01)
- CRT51 Crt 51 - 96091000200 (2006-02)
- CRT51 Crt 51 - Hecrt51k (2002-03)
- CRT51 Crt 51, 954001092d, 1996-02
- CRT51 Crt 51, Hecrt51f, 1999-02
- CRT51 Crt 51, 1998-02
- CRT51 Crt 51, Hacrt51e, 954000692 2003-01