General Electric Washer Transmissions and Clutches

Your Price

$33.95

General Electric Washer Clutch

★★★★★

1 Review

PartSelect Number PS11729473

Manufacturer Part Number WH05X24185

This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, and ultimately help spin the basket of the tub so your clothes finish damp and not soaked. If your washer has issues with spinning or agitating, this part is likely broken or has worn out, and will need to be replaced. To replace this part, some disassembly of your washer will be required, and tools like a screwdriver and socket wrench will be needed. This clutch is sold as an individual and does not come with any other parts.

Fixes these symptoms

Noisy and Marks Left on Clothes
Spinning Issues
Will not agitate
See more...

Installation Instructions

Marvin from SHOSHONE, ID

Washer not spinning

Tilt washer back.
Remove belt gaurd.
Remove belt.
Remove pulley.
Remove clutch and shifter.
Install in reverse order Read more...

Your Price

$13.95

General Electric Washer Clutch

PartSelect Number PS12726751

Manufacturer Part Number WH03X28951

Installation Instructions

Jose E from Mission, TX

Grinding noise LIke Gears that are not setting correctly.Disc

Disconnect power,turn off water,disconnect hose hot and cold. Disconnect drain hose careful water may drain out after you disconnect. Move washer to a place where you have enough room to work.Now lean washer to the floor on its back side Make sure to hold the lid from falling back I secure the lid with tape so it would not open. The washer should on its back side , you should see a gray wheel with a nut.Remove nut and pull the gray wheel off. you feel a magnetic pull, Once removed, you will see 3 screws remove stator now remove all screws holding the speed senors remove Mode shifter hold the Clutch because the spring is under it. Once you start it easy to replace. install new parts. Read more...

Videos!

Your Price

$167.95

General Electric Washer Shaft & Drive Tube Assembly

★★★★★

6 Reviews

PartSelect Number PS3652839

Manufacturer Part Number WH38X10019

Introducing GE's Washing Machine Shaft and Drive Tube Assembly: a crucial component for your washer. This assembly enhances your washer's performance by seamlessly connecting the motor to the washplate, while also shifting the drive system between agitate and spin. Included in this assembly is a tub seal, offering added protection and longevity to your appliance. Make sure to unplug your washer prior to installing this part for safety purposes. Donning work gloves during installation can protect your hands. With this GE assembly, you are guaranteed a reliable solution for your washer's seamless operation.

Installation Instructions

Dana from MIDDLEPORT, NY

Bearing was making noise on spin cycle

Disassembled washer removed shaft and drive tube assembly reinstalled new unit and replaced split nut during assembly. Read more...

Your Price

$184.95

General Electric Washer Shaft And Mode Shifter Assembly

PartSelect Number PS2354082

Manufacturer Part Number WH38X10017

Also known as the gearcase or transmission. This part helps move the agitator back and forth during the wash cycle. New shifter mounting holes are NOT threaded, use original self tapping screws to install new part. Tub seal is included with assembly.

Fixes these symptoms

Will not agitate
See more...

Installation Instructions

Walter from IRVING, TX

Very loud noise during the spin cycle

The first attempt to fix the problem did not turn out so well. I replaced the tub bearing, split ring, tub bearing washer and the hub washer. After reassembly and testing, the loud airplane noise was still present during the spin cycle
Then I ordered and replaced the mode shifter shaft assembly and, since I was going to disassemble again, also ordered a new 6-rib belt. Once reassembled and tested, it was quieter than when it was when brand new, according to my wife.
Parts came in very quickly and the tutorials/youtubes were spot on. Read more...