General Electric Washer Sensors

Your Price

$33.95

General Electric Washer Speed Sensor

★★★★★

12 Reviews

PartSelect Number PS16619248

Manufacturer Part Number WH03X32158

This is a speed sensor for a variety of washing machine models. Speed sensors are used to monitor the speed of the washer drum and communicate it to the electronic control board to slow or quicken it. If this speed sensor is damaged or bad, it will cause your washer drum to rotate too quickly, slowly, or inconsistently. Replacing this sensor will require a screwdriver and some minor disassembly of your washing machine. This sensor is an OEM part and is sold individually, so it does not come with any other parts or accessories.

Fixes these symptoms

Spinning Issues
Spins slowly
Will not agitate
See more...

Installation Instructions

william from MARIETTA, GA

Washer not spining

Put washer on it side. Removed shield belt and pulley from motor.
Unplugged and unsnapped speed sensor and replaced with new one . Washer spinning like it should. Problem solved Read more...

Your Price

$21.18

General Electric Washer Thermistor

PartSelect Number PS16542660

Manufacturer Part Number WH04X29448

Your Price

$43.95

General Electric Washer Speed Sensor Kit

★★★★★

3 Reviews

PartSelect Number PS8768455

Manufacturer Part Number WL49X20360

Revitalize the functionality of your laundry center with this Washer Speed Sensor from the reputable brand, GE. This sophisticated sensor effectively monitors the motor speed and diligently communicates this valuable data to the electronic control board, ensuring optimized performance of your appliance. The sensor comes as part of a comprehensive KIT SENSOR SPEED ensemble, tailored to enhance your washer's reliability and efficiency. For safety considerations, always remember to unplug your laundry center before embarking on the installation process. Protecting your hands with work gloves during installation is also highly recommended. Trust this GE Washer Speed Sensor to significantly boost your laundry center's performance and longevity.

Installation Instructions

Terry from HAMPTON, VA

replace speed sensor

The easiest way we found to install the speed sensor was to detach the motor from the washer by removing 2 hex bolts...one on the left and one on the right. This was much easier than other suggestions of removing the impeller itself and working in such a tight space. when placing the sensor on, it mounts to the back side of the motor in designated bracket area; the green face of the sensor must point downward and towards the impeller.
when remounting the motor, a second set of hands is helpful to reapply the belt and install the bolts. Read more...