Maytag Dishwasher Handles
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Maytag Dishwasher Handles
Maytag Dishwasher Latch Handle
PartSelect Number PS11747726
Manufacturer Part Number WP99002836
This black latch handle is four and a half inches long.
Fixes these symptoms
- Door latch failure
- Will Not Start
- See more...
Installation Instructions
Robert from DuBois, PA
door would not latch
simply remove the ten screws, lift up the inner door. Disconnect the four electrical prongs on the latch assembly. Connect the new assembly and replace screws. Very simple. Saved 100 dollar service call
Read more...
Maytag Dishwasher Handle
Unscrew the inside door panel using a star screw driver. Unscrew the broken plastic handle and replace with the new part. Screw the door panel back on.
Turn the breaker back on to restore power. Read more...
PartSelect Number PS11752989
Manufacturer Part Number WPW10329510
Enhance the functionality of your Whirlpool dishwasher with this genuine OEM handle. With its precision design, this handle is compatible with select models from Whirlpool and sister brands like KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef, ensuring a perfect fit and performance. Before you install this part, make sure to unplug the dishwasher or turn off the house circuit breaker. Use work gloves to protect your hands during installation. It's recommended to verify your model to ensure this handle fits perfectly, as parts might look similar but have slight variations in size and shape. Rely on this sturdy handle to keep your dishwasher user-friendly and durable for years.
Fixes these symptoms
- Door latch failure
- See more...
Installation Instructions
Sharon from ELBURN, IL
The handle was broken which we noticed when we had replaced the front panel.
Turn off the power to the dishwasher by turning off the breaker at the breaker panel.Unscrew the inside door panel using a star screw driver. Unscrew the broken plastic handle and replace with the new part. Screw the door panel back on.
Turn the breaker back on to restore power. Read more...
Maytag Dishwasher Door Latch Handle - White
First, turn off power to the unit (wall switch, in my case, may be a breaker in your case, just to be safe).
Simply removed all of the torx screwdrivers (I think I used torx driver bit #27, maybe #26, found in most security screwdriver bit sets).
Had to remove all the screws on both sides and along the top of the interior metal cover of the dishwasher door.
Once those were removed, worked the inner half of the door loose from the outer part (it did not have to come all the way off, just held it apart long enough to do the repair).
Then found the broken parts that had fallen in and remove them, then gently worked the latch assembly loose from the front panel and found the only way that the replacement part would fit, with the two small hinge points that snapped it into place on the latch assembly.
Replaced the latch assembly and moved the metal panel back into place, lining up the screw holes, started the two screws that go into the latch assembly itself and then a couple of screws on the sides to hold the panels together.
You can move the metal panel to position it just right before tightening any of the screws down all the way. I started with the two middle screws that held the latch assembly and then added all the rest, tightening them all loosely at first and then adjusting the fit before alternating sides to tighten them all firmly.
Latch works fine now. Read more...
PartSelect Number PS11747727
Manufacturer Part Number WP99002837
This manufacturer-approved door latch handle is for dishwashers.
Door latch handle fits on the door latch to unlatch and open the door.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Installation Instructions
Chris from Austin, TX
Broken latch made dishwasher difficult to open
This very easy repair made the appliance usable again.First, turn off power to the unit (wall switch, in my case, may be a breaker in your case, just to be safe).
Simply removed all of the torx screwdrivers (I think I used torx driver bit #27, maybe #26, found in most security screwdriver bit sets).
Had to remove all the screws on both sides and along the top of the interior metal cover of the dishwasher door.
Once those were removed, worked the inner half of the door loose from the outer part (it did not have to come all the way off, just held it apart long enough to do the repair).
Then found the broken parts that had fallen in and remove them, then gently worked the latch assembly loose from the front panel and found the only way that the replacement part would fit, with the two small hinge points that snapped it into place on the latch assembly.
Replaced the latch assembly and moved the metal panel back into place, lining up the screw holes, started the two screws that go into the latch assembly itself and then a couple of screws on the sides to hold the panels together.
You can move the metal panel to position it just right before tightening any of the screws down all the way. I started with the two middle screws that held the latch assembly and then added all the rest, tightening them all loosely at first and then adjusting the fit before alternating sides to tighten them all firmly.
Latch works fine now. Read more...
Maytag Dishwasher Door Handle Latch - Black
Remove the retaining screws holding the inner door panel in place. Then lift the panel away,make sure you unplug the wiring connector there noting the way it was plugged in.
Then remove the screws holding the stainless trim panel in place over the latch assembly area. Unscrew the screw retaining the latch/switch assembly, unplug the connectors on each side of the two switches,assemble the new latch/switch assembly and install ! ! Read more...
PartSelect Number PS11727842
Manufacturer Part Number W10834433
This door handle latch is three and a half inches long. It is all black in color and is made of plastic.
Fixes these symptoms
- Door latch failure
- Will Not Start
- See more...
Installation Instructions
Joseph from Vanderbilt, PA
handle to open door was broke off
very easy to replace! !Remove the retaining screws holding the inner door panel in place. Then lift the panel away,make sure you unplug the wiring connector there noting the way it was plugged in.
Then remove the screws holding the stainless trim panel in place over the latch assembly area. Unscrew the screw retaining the latch/switch assembly, unplug the connectors on each side of the two switches,assemble the new latch/switch assembly and install ! ! Read more...
Maytag Dishwasher Door Handle (stainless Steel)
PartSelect Number PS3418030
Manufacturer Part Number W10195738A
Screws are included.
Installation Instructions
Ed from POMPANO BEACH, FL
Replaced black front w/ stainless steel
The only appliance that wasn't SS was my $900 dishwasher that was tiled-in when my kitchen floors were done...I can only replace it by removing the granite counter. I ordered the SS front and handle to update the look of the 4 year old DW and it was a really good idea. * screws later and it was done. The 'repair' took 15-20 minutes and the results are amazing. BTW...the parts took less than 2 business days to arrive...
Read more...
Maytag Dishwasher Handle
PartSelect Number PS11754259
Manufacturer Part Number WPW10401479
The Whirlpool HANDLE is a genuine OEM part suitable for select dishwasher models from Whirlpool and its associated brands including KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. This versatile and well-crafted component is produced to accommodate various dishwasher designs, so be sure to confirm compatibility with your model. While they may appear identical, parts may have minor size or shape differences. Before installing this dishwasher door handle, it's recommended to unplug the appliance or switch off the house's circuit breaker for safety reasons. Do wear work gloves to protect your hands during this procedure. Trust this Whirlpool handle for the quality and performance needed to keep your appliance operating at top shape.
Fixes these symptoms
- Door latch failure
- See more...
Maytag Dishwasher Handle
PartSelect Number PS11750311
Manufacturer Part Number WPW10205889
Experience the durable quality of the Whirlpool Dishwasher Door Handle in sleek black. This genuine OEM part is designed for compatibility with selected models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dishwashers. Despite and potential similarities, it is essential to verify that this door handle is the correct fit for your appliance as parts may differ in size and shape. For safety, always ensure that the dishwasher is disconnected from its power source before installing this part, and it's recommended to wear work gloves to safeguard your hands. The handle, designed for durability and ease of use, will add functionality and aesthetic appeal to your dishwasher. Opt for quality and ease, choose Whirlpool.
Fixes these symptoms
- Door latch failure
- See more...
Related Maytag Dishwasher Parts
- All Maytag Dishwasher parts
- Maytag Dishwasher Brackets and Flanges
- Maytag Dishwasher Caps and Lids
- Maytag Dishwasher Circuit Boards and Touch Pads
- Maytag Dishwasher Deflectors and Chutes
- Maytag Dishwasher Dishracks
- Maytag Dishwasher Dispensers
- Maytag Dishwasher Doors
- Maytag Dishwasher Ducts and Vents
- Maytag Dishwasher Filters
- Maytag Dishwasher Fuses
- Maytag Dishwasher Hardware
- Maytag Dishwasher Hinges
- Maytag Dishwasher Hoses and Tubes
- Maytag Dishwasher Insulations
- Maytag Dishwasher Latches
- Maytag Dishwasher Lights and Bulbs
- Maytag Dishwasher Panels
- Maytag Dishwasher Pumps
- Maytag Dishwasher Seals and Gaskets
- Maytag Dishwasher Spray Arms
- Maytag Dishwasher Springs and Shock Absorbers
- Maytag Dishwasher Switches
- Maytag Dishwasher Valves
- Maytag Dishwasher Wheels and Rollers
- Maytag Dishwasher Wire Plugs and Connectors