Maytag Dishwasher Brackets and Flanges
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Maytag Dishwasher Brackets and Flanges
Your Price
$14.65
In Stock
Maytag Dishwasher Mounting Bracket
PartSelect Number PS11745496
Manufacturer Part Number WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Installation Instructions
Judith from Essex, MA
Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Read more...
Your Price
$27.26
In Stock
Maytag Dishwasher Side Mounting Bracket Kit
PartSelect Number PS1487167
Manufacturer Part Number 8212560
This mounting kit can be used on solid surface countertops.
Fixes these symptoms
- Door won’t close
- See more...
Your Price
$49.28
In Stock
Maytag Dishwasher Spray Arm Mounting Bracket
PartSelect Number PS11741381
Manufacturer Part Number WP3385159
This mount attaches the spray arm to the upper rack.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
ken from elwood, IN
Broken top mount for spray arm
Had to use a standard flat screw driver to pry off the old mount. used a phillpips head driver to fasten the mount to the spray arm and pushed the new mount in place.
Read more...
Your Price
$26.95
In Stock
Maytag Dishwasher Brace
PartSelect Number PS11765163
Manufacturer Part Number W10850371
Introducing the Whirlpool Dishwasher Door Brace, a genuine Whirlpool part designed to notably enhance the performance of your dishwasher. This durable brace, specially engineered to replace the flat panel vapor barrier, has been crafted with a rod to keep the hinges straight, ensuring better alignment and longevity of your dishwasher door. This component assists in reinforcing the rear of your dishwasher tub, adding to the overall structural integrity. Designed for easy installation, you'll want to disconnect power and shut off the water supply before beginning to ensure a safe process. It's recommended to verify the correct part for your enterprise model before acquisition. Turn to Whirlpool's trusted reliability for this exceptional dishwasher door brace to keep your unit running smoothly.
Fixes these symptoms
- Leaking
- See more...
Installation Instructions
michael from TUCSON, AZ
dishwasher leaking from door
it was ok if I would have been sent the correct part, but you sent me the wrong part # and I had to go to the post office and mail it back. the part was not the same number as my order and completely wrong, still waiting for my refund and shipping charges. So you have failed me.
Read more...
Your Price
$21.95
In Stock
Maytag Dishwasher Bracket
PartSelect Number PS11727941
Manufacturer Part Number W10837623
Introducing the genuine OEM Support Bracket from Whirlpool, designed exclusively for securing the water supply tube in your dishwasher. Crafted to offer exceptional performance, this accessory is compatible with specific models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. To confirm its compatibility, cross-check this bracket with the model of your appliance before ordering. Remember to safely unplug your dishwasher and shut off the water supply before installation. For best results and to avoid potential injury, always wear work gloves during installation. Restore the efficiency of your dishwasher with this superior Whirlpool Support Bracket.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Your Price
$25.95
In Stock
Maytag Dishwasher Dispenser Mounting Bracket
PartSelect Number PS11755103
Manufacturer Part Number WPW10462232
Fixes these symptoms
- Leaking
- Will not dispense detergent
- See more...
Your Price
$26.95
In Stock
Maytag Dishwasher Heater Support Bracket
PartSelect Number PS11770271
Manufacturer Part Number W11027055
Fixes these symptoms
- Not drying dishes properly
- See more...
Your Price
$14.95
In Stock
Your Price
$25.95
In Stock
Your Price
$24.95
In Stock
Maytag Dishwasher Spray Arm Feed Tube Holder
PartSelect Number PS11741382
Manufacturer Part Number WP3385160
This part holds the spray arm feed tube up.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
ken from elwood, IN
Broken top mount for spray arm
Had to use a standard flat screw driver to pry off the old mount. used a phillpips head driver to fasten the mount to the spray arm and pushed the new mount in place.
Read more...
Related Maytag Dishwasher Parts
- All Maytag Dishwasher parts
- Maytag Dishwasher Caps and Lids
- Maytag Dishwasher Circuit Boards and Touch Pads
- Maytag Dishwasher Deflectors and Chutes
- Maytag Dishwasher Dishracks
- Maytag Dishwasher Dispensers
- Maytag Dishwasher Doors
- Maytag Dishwasher Ducts and Vents
- Maytag Dishwasher Filters
- Maytag Dishwasher Fuses
- Maytag Dishwasher Handles
- Maytag Dishwasher Hardware
- Maytag Dishwasher Hinges
- Maytag Dishwasher Hoses and Tubes
- Maytag Dishwasher Insulations
- Maytag Dishwasher Latches
- Maytag Dishwasher Lights and Bulbs
- Maytag Dishwasher Panels
- Maytag Dishwasher Pumps
- Maytag Dishwasher Seals and Gaskets
- Maytag Dishwasher Spray Arms
- Maytag Dishwasher Springs and Shock Absorbers
- Maytag Dishwasher Switches
- Maytag Dishwasher Valves
- Maytag Dishwasher Wheels and Rollers
- Maytag Dishwasher Wire Plugs and Connectors