Maytag Dishwasher Latches
Popular Maytag Dishwasher Latches
Your Price
$30.89
In Stock
Maytag Dishwasher Door Handle And Latch Assembly with Switch
PartSelect Number PS11748729
Manufacturer Part Number WPW10130695
This door latch (Dishwasher Door Latch Assembly, Door Latch Assembly, Latch Assembly) is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. It is located on the door of your dishwasher, and is mounted on the inner door panel. The door latch can break from material fatigue. If the door is often slammed or opened quickly, the latch may break prematurely. If the door won't open or the door switches won't activate, you will need to replace this part. This latch measures 5 1/2 inches wide, 4 1/2 inches high, 2 1/2 inches deep, is constructed out of plastic and comes in black. The kit includes the black handle, latch, and 2 switches.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Installation Instructions
Walter from Tucson, AZ
Broken latch handle
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is disconect the power from the dishwasher (unless you like to live dangerously like me) take your drill with the correct size torx bit and remove all the screws on the inside door pannel (the top center two screws actually hold the latch assembly in place). Disconect the 4 wires from the old part and reconect them to the new part and reinstall all the torx screws being careful not to strip the plastic threads that they screw into if you are using a drill. Whole process takes less than 5 minutes. I am surprised that Maytag used such a flimsy handle assembly in their dishwashers since they are supposed to have the repair men with the most time on their hands. They probably sell just as many handle assemblies as they do dishwashers that have this particular part in it, probably more since you will probably have to change it 2 or 3 times during the life of the unit.
Read more...
Your Price
$36.55
In Stock
Maytag Dishwasher Door Latch - Black
PartSelect Number PS11756967
Manufacturer Part Number WPW10653840
This is a door latch for various dishwashers. Door latches are designed to communicate with the control board of the dishwasher when the door is closed and latched shut. If your dishwasher is not latching shut properly, or if your dishwasher will not start when the door is shut, then this latch is likely broken or bad. To replace this door latch, you will need a screwdriver or drill, and a set of pliers. This latch is sold individually, and does not come with any securing screws or other parts.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Installation Instructions
RONALD from PRESCOTT, AZ
Door would not latch shut
Following a utube video made it easy. Removed the outer cover of the door to expose latch. Two screws remove the latch, pay attention to how it was positioned and put the new one on and then replace the panel. But first turn off the electricity to the unit at the fuse box.
Read more...
Maytag Dishwasher Door Latch Assembly
Ordered assembly with help of order desk to assure correct part number. Arrived within 3 to 4 days. Not sure but very fast. Only had to wash dishes by hand once.
Turned off power to dishwasher, my electrical panel is clearly marked with switch for dishwasher. No guess work there.
3 min. to remove old assy. 3 min. to replace with new part.
I might add that I am a 67yr. old female. So if I can handle this repair, anyone can.
Saved repairman service call, or purchasing a new dishwasher. Read more...
PartSelect Number PS11731673
Manufacturer Part Number W10862259
This replacement part is a door latch assembly for a dishwasher. The latch keeps the appliance door closed while it is running, and prohibits the dishwasher from starting when the door is open. Depending on your model, you will need to remove approximately eleven screws to remove the inner panel and access the latch assembly. The latch assembly is connected by two wiring harnesses that are nearly identical, so it is recommended to make note of where each harness goes before continuing with the repair. You will need a Torx screwdriver to complete the repair. Disconnect the dishwasher from the power source before beginning this repair.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Will Not Start
- See more...
Installation Instructions
Marilyn from Marsing, ID
Handle and latch broke
I had to force the door open, due to a broken handle/latch.Ordered assembly with help of order desk to assure correct part number. Arrived within 3 to 4 days. Not sure but very fast. Only had to wash dishes by hand once.
Turned off power to dishwasher, my electrical panel is clearly marked with switch for dishwasher. No guess work there.
3 min. to remove old assy. 3 min. to replace with new part.
I might add that I am a 67yr. old female. So if I can handle this repair, anyone can.
Saved repairman service call, or purchasing a new dishwasher. Read more...
Your Price
$27.89
In Stock
Maytag Dishwasher Door Latch - Black
PartSelect Number PS8770043
Manufacturer Part Number W10619006
NOTE: This part has been redesigned, it may appear different but will still function the same as the original.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Installation Instructions
Arthur from NEWNAN, GA
Inoperative door latch replaced by a redesigned latch
1. Disconnect power at the breaker, 2. remove two wood screws fastening the dishwasher to the cabinet and slide the unit out approximately 2 inches. 3. Remove old latch strike and replace with redesigned strike. 4. Slide unit in and reattached to cabinet. 5. Remove 11 screws holding inner panel of door assembly and one screw holding user interface unit to door. 6. Disconnect snap cable to latch assembly and replace the latch unit. 7. Reassemble.
Read more...
Your Price
$56.22
In Stock
Maytag Dishwasher Door Latch with Switches - NO Handle
So, first, make super sure all power is disconnected. Then take the torx and remove all the screws on interior front cover - the top center two actually hold the latch assembly and handle. Once all are removed, I propped the cover up and left all wiring connected. I removed the switches connected to the old latch assembly and just removed the new switches from the new latch assembly, and popped the old ones onto the new latch assembly. Now have new switches if the old ones ever wear out.
The latch assembly just pops out from what should be two sets of plastic peg clips molded into the black control panel back. Mine were busted on one side. So I molded some jb weld on the remaining sides to the pegs on the latch assembly and then screwed all back together (the controls on the panel are fine, not spending $85 if I can get away with sticking it...and the upper center two screws do the most of the holding anyway).
Works great again. I really am ultra impressed with the HUGE difference in reinforcement that the new handle has. If Maytag would have built it that way to begin with, should not have broke. Anyway, if you are here just checking to see if you can do and how much parts are, place the order - it is no problem and cheap, and will probably never give up and break again. Read more...
PartSelect Number PS11751688
Manufacturer Part Number WPW10275768
This door latch, used in dishwashers, is located at the top of the door and locks the door shut when the dishwasher is working. If the door will not close or is damaged, changing the latch could be the solution. For this repair, remove all screws from the inner panel, then lift up the inner door panel and hold the door apart. Next, access the latch and pull wires from the switches. Refer to the manual provided by the manufacturer for further instructions and guidance. Remember to unplug the dishwasher from the power source or shut off the house circuit breaker before beginning this installation project.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Installation Instructions
Dennis from Austin, TX
Latch handle broke due to Latch Assembly worn
This repair was fairly quick and easy. The parts are much better made than the stock Maytag. The parts from PartSelect came lightening quick! Never used before, always Sears, but will ALWAYS use from now on!So, first, make super sure all power is disconnected. Then take the torx and remove all the screws on interior front cover - the top center two actually hold the latch assembly and handle. Once all are removed, I propped the cover up and left all wiring connected. I removed the switches connected to the old latch assembly and just removed the new switches from the new latch assembly, and popped the old ones onto the new latch assembly. Now have new switches if the old ones ever wear out.
The latch assembly just pops out from what should be two sets of plastic peg clips molded into the black control panel back. Mine were busted on one side. So I molded some jb weld on the remaining sides to the pegs on the latch assembly and then screwed all back together (the controls on the panel are fine, not spending $85 if I can get away with sticking it...and the upper center two screws do the most of the holding anyway).
Works great again. I really am ultra impressed with the HUGE difference in reinforcement that the new handle has. If Maytag would have built it that way to begin with, should not have broke. Anyway, if you are here just checking to see if you can do and how much parts are, place the order - it is no problem and cheap, and will probably never give up and break again. Read more...
Your Price
$54.55
In Stock
Maytag Dishwasher Door Latch and Switch Assembly
PartSelect Number PS11754317
Manufacturer Part Number WPW10404412
Handle NOT included. This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Will Not Start
- See more...
Installation Instructions
Gerald from CASTLE ROCK, CO
Lock latch would not function properly
Removed front instrument cover. Removed latch assembly. Tried to fix it . No luck. Ordered new latch assembly. Came in from partsselect in 3 days. Installed new latch. Replaced cover.
Read more...
Your Price
$11.09
In Stock
Maytag Dishwasher Soap Cup Latch Kit
You have to take off the nine star pointed screws. So you need a special screwdriver or I had a socket set of them and I used a ratchet to make it easier. I think there are nine of them around the base of the door. Then remove the door and set it on the counter. Flip it over and there is a small plastic cover that has to be removed from the back of it, and it is easily removed by gently pulling on it.
Now comes the difficult part. There is a locking piece on it that holds the latch onto the door by interlocking with a piece on the back side of the door. I took a pair of wire snips and just cut the old interlocking piece off. This way I didn't have to try and slide the two interlocking pieces apart.
When you go to put the new piece on before you interlock them make sure they are put on right. Specifically the latch is pointing the right way to seal the detergent door. Otherwise it can be a pain to separate the interlocking pieces again. (which is why I cut it off the old one).
Then you're done. Just put it all back together. Read more...
PartSelect Number PS382922
Manufacturer Part Number 676413
This soap cup latch kit, used in a dishwasher, will keep the dispenser cover closed. If your dishwasher will not dispense detergent, there is a door latch failure, the dishes are not cleaning properly, or there is leaking, then this kit can be the solution to your symptoms. The tools required for this replacement are a #15 torx bits, a small blade screwdriver, and slip joint pliers. First locate the soap box and remove the latch on both sides. Next step is to remove the screws in the inner door panel and remove the plastic cover at the back. Remove the old latch assembly and add the new one. Make sure to unplug your dishwasher before beginning this installation project.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Installation Instructions
Steven from Edmond, OK
Latch broke on dishwasher
Look at the exploded parts diagram, that parts select provides on their website.You have to take off the nine star pointed screws. So you need a special screwdriver or I had a socket set of them and I used a ratchet to make it easier. I think there are nine of them around the base of the door. Then remove the door and set it on the counter. Flip it over and there is a small plastic cover that has to be removed from the back of it, and it is easily removed by gently pulling on it.
Now comes the difficult part. There is a locking piece on it that holds the latch onto the door by interlocking with a piece on the back side of the door. I took a pair of wire snips and just cut the old interlocking piece off. This way I didn't have to try and slide the two interlocking pieces apart.
When you go to put the new piece on before you interlock them make sure they are put on right. Specifically the latch is pointing the right way to seal the detergent door. Otherwise it can be a pain to separate the interlocking pieces again. (which is why I cut it off the old one).
Then you're done. Just put it all back together. Read more...
Your Price
$78.12
In Stock
Maytag Dishwasher Door Switches and Holder Assembly
remove the four wire conections and replace with new new switch Read more...
PartSelect Number PS2099645
Manufacturer Part Number 99002254
This part senses when the dishwasher door is closed so the cycle can start, and prevents it from starting if the door is not closed. If the dishwasher will not start or will not close, you may need to replace the door switches and holder assembly, also known as the door latch assembly. The dishwasher will not start if this part is defective. It includes two switches and the holder, this part does not include the handle or screws. Tools needed are T20 torx driver, needle nose pliers, and 1/4 inch nut driver. This is a genuine OEM part that is sourced directly from the manufacturer.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Will Not Start
- See more...
Installation Instructions
Robert from Johnson, VT
no power
remove the eight screws that hold the inside door cover to gain access to the door switch. remove the four wire conections and replace with new new switch Read more...
Your Price
$7.42
In Stock
Maytag Dishwasher Lever
PartSelect Number PS11750029
Manufacturer Part Number WPW10195037
Fixes these symptoms
- Leaking
- Will not fill with water
- See more...
Installation Instructions
Jolene from CINCINNATI, OH
Dishwasher was not filling up with water.
First I got online to troubleshoot issue to save mysel from a service call. One of the first UTube videos, a young man said usually the main issue was the lever. He pushed down on the floater. If it didn't click, than the lever below needed to be replaced. Most important to turn off the circuit breaker before beginning the repair. I got on whirlpool.com, Part Select, ordered the lever, which was under $10. And once delivered, was able to switch out the old lever with the new replacement. Part Quote video took me through the process step by step. The lever package was marked that usually it was only 2% of the time that replacing the lever fixed the issue. Of course, I was thrilled, my dishwasher was up and running again. Thank you.
Read more...
Your Price
$62.27
In Stock
Maytag Dishwasher Door Latch Bracket Kit - NO Handle
The hardest thing for me was to decipher the model number as they use '1s' and 'Is' and you can't tell them apart.
Also the part diagrams should have each part number listed to make it easier. Took me longer to work out what to order than do the repair. Read more...
PartSelect Number PS886319
Manufacturer Part Number 8193882
Handle is not included with this part.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Will Not Start
- See more...
Installation Instructions
Nigel from Boca Raton, FL
The door handle broke inside so that it was all loose and was difficult to close.
Recoved the screws which secured the handle assembly (approx 8). Removed the old parts and screwed home the new parts and replaced the assembly. Worked perfectly.The hardest thing for me was to decipher the model number as they use '1s' and 'Is' and you can't tell them apart.
Also the part diagrams should have each part number listed to make it easier. Took me longer to work out what to order than do the repair. Read more...
Related Maytag Dishwasher Parts
- All Maytag Dishwasher parts
- Maytag Dishwasher Brackets and Flanges
- Maytag Dishwasher Caps and Lids
- Maytag Dishwasher Circuit Boards and Touch Pads
- Maytag Dishwasher Dishracks
- Maytag Dishwasher Dispensers
- Maytag Dishwasher Ducts and Vents
- Maytag Dishwasher Handles
- Maytag Dishwasher Hardware
- Maytag Dishwasher Hinges
- Maytag Dishwasher Hoses and Tubes
- Maytag Dishwasher Motors
- Maytag Dishwasher Panels
- Maytag Dishwasher Pumps
- Maytag Dishwasher Racks
- Maytag Dishwasher Seals and Gaskets
- Maytag Dishwasher Spray Arms
- Maytag Dishwasher Springs and Shock Absorbers
- Maytag Dishwasher Switches
- Maytag Dishwasher Wheels and Rollers