General Electric Dishwasher Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular General Electric Dishwasher Hoses and Tubes
Your Price
$36.95
In Stock
General Electric Dishwasher Conduit Mid Assembly
PartSelect Number PS6883615
Manufacturer Part Number WD22X10094
Discover the perfect solution for your dishwasher appliances with GE's Conduit Mid Assembly. Often referred to as the spray arm manifold, this essential piece securely holds the spray arm, linking it to the water feed tube. This precise design aids in delivering superior performance every time your dishwasher is put to use. For safe installation, always wear work gloves to provide protection for your hands. Choose the reliability and high-quality construction of GE's Conduit Mid Assembly for a seamless, stress-free appliance repair journey.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
John from CLIFFSIDE PK, NJ
Kept falling off during use.
Just took old one off & install new one. Snaps on dish rack. Took 5 minutes.
Read more...
General Electric Dishwasher High Loop Drain Hose
PartSelect Number PS16618969
Manufacturer Part Number WD24X29378
Enhance the efficiency of your GE dishwasher with this high loop drain hose. Perfect for channeling the drain water effortlessly from the dishwasher to the drainage, this appliance part simplifies the everyday task of dishwashing. Remember to shut off your water supply and unplug the unit before you embark on installation. Supplies with clear instructions to guide you on the successful installation of the high loop drain hose. Don't forget your work gloves - wearing them will safeguard your hands throughout this process. With this GE high loop drain hose, expect a hassle-free and smooth running dishwasher.
Fixes these symptoms
- Leaking
- Not draining
- See more...
Installation Instructions
Tina from SOUTH WEST CY, MO
I had a hole in the drain line of my dishwasher.
It was relatively easy to fix. I unscrewed the mounting screws from the cabinet, slide the dishwasher out to access the pump under the dishwasher, I did raise the dishwasher on the left side and steadied with a stool to make access to the pump fitting easier. Then I loosed both clamps at the ends of the hose ie. from the dishwasher pump and the connection to the sink drain line, pulled the clamp off of the end that connects to the pump and placed it on the new hose connection, I removed the old hose, connected the new one and tightened the drain line connections. I placed the hose in the hose holders on the side of the dishwasher slid the dishwasher back into place and secured it in place with the mounting screws.
Read more...
Your Price
$27.95
In Stock
General Electric Dishwasher Drain Tube Assembly
PartSelect Number PS6011670
Manufacturer Part Number WD24X10062
Upgrade the efficiency of your dishwasher with the GE Drain Hose Assembly. This essential component facilitates the flow of drain water from the appliance to the main drain, ensuring your machine functions optimally. Remember to disconnect your dishwasher from its power source and shut off its water supply before commencing this repair. Follow the installation guide scrupulously for a successful replacement and to ensure the longevity of your appliance. Protect your hands with work gloves during the procedure. Conclusively, this Drain Hose Assembly exemplifies the trusted quality synonymous with GE products.
Fixes these symptoms
- Leaking
- Not draining
- See more...
General Electric Dishwasher Pump Filter Coupler
PartSelect Number PS1517648
Manufacturer Part Number WD01X10342
This coupler, also known as a hose connector, is made of white plastic and is about one inch in height, and just over one inch in length. Replacing the coupler is a fairly easy repair. The hardest part of the repair is accessing the spray arm and filter to remove them, in order to replace the coupler. In order to complete this repair, you will need a flat head screwdriver and a 4-inch nut driver.
Fixes these symptoms
- Leaking
- Not cleaning dishes properly
- Not draining
- See more...
Installation Instructions
Tom from Magnolia, IA
Dishwasher would not drain
Watched a YouTube video description of the repair and ordered parts from this site
Read more...
General Electric Dishwasher Elbow Hose And Clamp Kit
PartSelect Number PS17626243
Manufacturer Part Number WD24X33918
Fixes these symptoms
- Leaking
- See more...
Your Price
$35.95
In Stock
General Electric Dishwasher Conduit Adapter
PartSelect Number PS6883610
Manufacturer Part Number WD18X10051
This conduit adapter attaches to the central wash arm in your dishwasher to allow the arm to clean dishes thoroughly and properly. This genuine OEM adapter is made of high quality plastic and measures approximately 6 inches long by 4.5 inches wide.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
General Electric Dishwasher Faucet Adapter
PartSelect Number PS2322272
Manufacturer Part Number WD01X10383
This part is used to connect your dishwasher to your sink faucet.
Fixes these symptoms
- Leaking
- See more...
Your Price
$39.95
In Stock
General Electric Dishwasher Drain Tube Kit
Easy as cake. Perfect part! Read more...
PartSelect Number PS2339994
Manufacturer Part Number WD24X10045
This kit includes the drain hose with black rubber end fittings and a clamp.
Fixes these symptoms
- Leaking
- Not draining
- See more...
Installation Instructions
David from Winter Springs, FL
Replacing Drain hose
Remove screws holding old hose. Attach clamp to new hose with nut driver. Tighten hose and clamp around attachment.Easy as cake. Perfect part! Read more...
General Electric Dishwasher Drain Hose
1. I also purchased a new drain solenoid and impeller kit. Note that both of these items are already included in the Motor and Pump kit replacement. There is no need to by both, now I have extras.
2. The end of the drain tube has to be trimmed if you are routing the drain tube to an air gap mounted on your kitchen sink. You have to cut the large diameter end of the tube to get to the narrow portion that will fit on your air gap.
3. The first cycle you run with the new motor/pump assembly is noisy. When you first fire it up the components in the pump are all dry, and they squeal until the water gets to them. I initially thought I had done something wrong, but once the water started flowing all the peculiar sounds cleared up. Read more...
PartSelect Number PS260686
Manufacturer Part Number WD24X10014
This drain hose is an OEM, manufacturer-approved replacement part for your dishwasher. The drain hose filters out the wastewater from the dishwasher. If there is a hole in it, water will leak out of your dishwasher. Shut off the water and power to the unit before beginning this repair. Accessing the drain hose involves unscrewing the dishwasher and pulling it out. Remove the clamp holding the hose in place to its connection under the sink, using a 5/16ths socket. Disconnect the fill line. Use a 1/4 inch nut driver to loosen the clamp at the other end of the drain hose. Keep a towel handy for any water still inside. Keep the clamps for use on your new drain hose. Reinstall all hoses and lines in reverse order.
Fixes these symptoms
- Leaking
- Not draining
- See more...
Installation Instructions
Mark from Morgan Hill, CA
Water not draining from dishwasher
I had never done work on my dishwasher - I was a rookie in this area. Turns out the work itself was quite simple. Pulled the dishwasher out, turned it over, and was able to easily replace the motor and pump assembly. The drain tube was also an easy replace. A couple key notes:1. I also purchased a new drain solenoid and impeller kit. Note that both of these items are already included in the Motor and Pump kit replacement. There is no need to by both, now I have extras.
2. The end of the drain tube has to be trimmed if you are routing the drain tube to an air gap mounted on your kitchen sink. You have to cut the large diameter end of the tube to get to the narrow portion that will fit on your air gap.
3. The first cycle you run with the new motor/pump assembly is noisy. When you first fire it up the components in the pump are all dry, and they squeal until the water gets to them. I initially thought I had done something wrong, but once the water started flowing all the peculiar sounds cleared up. Read more...
General Electric Dishwasher Hose Bottle Blaster
PartSelect Number PS8767439
Manufacturer Part Number WD24X20262
Related General Electric Dishwasher Parts
- All General Electric Dishwasher parts
- General Electric Dishwasher Brackets and Flanges
- General Electric Dishwasher Caps and Lids
- General Electric Dishwasher Circuit Boards and Touch Pads
- General Electric Dishwasher Dishracks
- General Electric Dishwasher Dispensers
- General Electric Dishwasher Doors
- General Electric Dishwasher Drawers and Glides
- General Electric Dishwasher Ducts and Vents
- General Electric Dishwasher Elements and Burners
- General Electric Dishwasher Filters
- General Electric Dishwasher Grilles and Kickplates
- General Electric Dishwasher Handles
- General Electric Dishwasher Hardware
- General Electric Dishwasher Hinges
- General Electric Dishwasher Insulations
- General Electric Dishwasher Knobs
- General Electric Dishwasher Latches
- General Electric Dishwasher Legs and Feet
- General Electric Dishwasher Lights and Bulbs
- General Electric Dishwasher Manuals and Literatures
- General Electric Dishwasher Motors
- General Electric Dishwasher Panels
- General Electric Dishwasher Power Cords
- General Electric Dishwasher Pumps
- General Electric Dishwasher Racks
- General Electric Dishwasher Seals and Gaskets
- General Electric Dishwasher Sensors
- General Electric Dishwasher Spray Arms
- General Electric Dishwasher Springs and Shock Absorbers
- General Electric Dishwasher Switches
- General Electric Dishwasher Timers
- General Electric Dishwasher Trays and Shelves
- General Electric Dishwasher Trims
- General Electric Dishwasher Valves
- General Electric Dishwasher Wheels and Rollers