General Electric Dishwasher Dishracks
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular General Electric Dishwasher Dishracks
Your Price
$72.95
On Order
General Electric Dishwasher Upper Rack Assembly
PartSelect Number PS16618975
Manufacturer Part Number WD28X30219
This dishrack is for dishwashers. The dishrack holds the dishes in place during the dishwashing cycle. Follow the instructions in the manual when installing this part.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Cooke, from STAMFORD, CT
Racks were rusted
Terrible! Bottom rack was wrong... original was discontinued. Fork and knife holder did not fit in original location. Parts company new this and still processed the order! Disaster!
Read more...
Your Price
$144.95
In Stock
General Electric Dishwasher Complete Lower Service Rack Assembly
One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces. Read more...
PartSelect Number PS12749241
Manufacturer Part Number WD28X25960
This dish rack is for dishwashers. This dish rack holds the dishes in place during the dish washing cycle.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
nathan from commerce, MI
Lower rack began rusting and wheels broke off.
Pull old rack out, slip new one in!One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces. Read more...
Your Price
$20.95
In Stock
General Electric Dishwasher Rack Slide End Cap
PartSelect Number PS2370502
Manufacturer Part Number WD12X10304
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is causing the door to not close properly, it may be due to the part being worn out or damaged. All you need to complete this repair is a small flat blade screw driver. Simply pop out the cap with a smaller flat-blade screwdriver and snap the new one into place. If the rear cap needs to be replaced you will need to remove both front caps and slide the rack completely off for full access. It is important to note that this part is sold individually, and more than one may be required, depending on your repair. An inexpensive part, it can be a good idea to purchase several at a time to have on-hand when needed.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Not cleaning dishes properly
- See more...
Installation Instructions
Joseph from Haymarket, VA
Worn/broken plastic parts were causing misery
Order arrived two days after being placed. Super easy to remove the old, worn, broken plastic parts and replace with new. Everything popped right on just as shown in the diagram. Our happiness with our dishwasher has increased 100%. BTW, thanks to the very helpful, friendly and knowledgeable staff at PartSelect.com -- next job, replace the ice maker in the freezer!
Read more...
Your Price
$39.95
In Stock
General Electric Dishwasher Silverware Basket
PartSelect Number PS959351
Manufacturer Part Number WD28X10128
This is a basket for washing flatware or silverware in your dishwasher.
Fixes these symptoms
- Leaking
- Not cleaning dishes properly
- See more...
Installation Instructions
Jack from PHOENIX, AZ
OLD ONE HAD HOLES IN IT AND SILVERWARE WAS SLIPPING THRUGH THE BASKET TO THE INTERIOR OF THE DISHWASHER
1. remove old basket. 2 Place new basket.. Done
Read more...
Your Price
$49.93
In Stock
General Electric Dishwasher Complete Silverware Basket Assembly
PartSelect Number PS11772005
Manufacturer Part Number WD28X22867
This is a silverware basket for various dishwashers. This basket assembly attaches to the dishrack within your dishwasher to hold your silverware so it can be cleaned and washed. If your current silverware basket is missing or unable to adequately hold your silverware, it should be replaced immediately. This basket assembly features the basket itself, which is made of dark gray ABS material, two red hooks that allow the basket to be secured to the lower dishrack, and three clamps for each of the respective baskets that allow you to stand your cutlery up. This OEM silverware basket is sold individually and does not come with any other parts for your dishwasher.
Your Price
$39.95
In Stock
General Electric Dishwasher Basket W/lids
PartSelect Number PS1016011
Manufacturer Part Number WD28X10177
This is a basket for washing flatware or silverware in your dishwasher.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Gerald from Kearney, NE
Your Price
$13.95
In Stock
General Electric Dishwasher Upper Rack End Cap
Ordering the parts was easy and delivery was fast. Read more...
PartSelect Number PS958986
Manufacturer Part Number WD12X10184
This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from falling when being pulled out too far.
Installation Instructions
steve from ramsey, MN
Broken drawer slides
The repair was very easy, I just had to replace some bad bearing slides in the drawer pull. Remove the end cap, remove the top drawer, remove the old bearing slide from the drawer slide and snap the new one in. finally replacing the end caps. Ordering the parts was easy and delivery was fast. Read more...
Your Price
$57.77
In Stock
General Electric Dishwasher Upper Rack Rail Assembly
PartSelect Number PS8767476
Manufacturer Part Number WD30X20110
This inner rail is an authentic OEM replacement part that is compatible with dishwashers. The inner rail supports the upper rack and ensures that the rack can slide in and out of the dishwasher smoothly. If the inner rail breaks or becomes dislodged, the upper rack will become unstable, it may slide forward on its own and you may have difficulties closing the dishwasher door. The plastic endcap is sold together with the inner rail. Each rail is sold individually; however, it can fit on either side of the dishwasher.
Your Price
$37.95
In Stock
General Electric Dishwasher Silverware Basket And Lid
PartSelect Number PS12710109
Manufacturer Part Number WD28X24747
Ensure your kitchen utensils get thoroughly cleaned with this durable Silverware Basket and Lid from GE. Designed explicitly for enhancing washing effectiveness, it ensures all your silverware gets properly washed. Its unique design helps in protecting delicate utensils ensuring no damages occur during the rigorous wash cycle. This accessory is easy to install, significantly reducing downtime experienced during part replacement. Keep your silverware sparkling clean with this robust GE Silverware Basket and Lid.
Your Price
$33.95
In Stock
General Electric Dishwasher Silverware Basket Assembly
PartSelect Number PS11759027
Manufacturer Part Number WD28X22621
This is a silverware basket for various dishwashers. This basket is designed to support and hold your silverware during the washing cycle, so it is properly cleaned and dried. This basket assembly features three chambers, two of which are larger, and one in the middle being slightly smaller, and each of which containing a retaining clamp at the top to secure cutlery inside. If your current dishwasher basket is damaged or missing, and unable to properly hold silverware, it needs to be replaced immediately. This OEM basket assembly is the larger of two total baskets for your dishwasher assembly, but is sold individually, so consider that before ordering.
Installation Instructions
Daniel from WATERBURY, CT
Dish washer wasn't getting the water hot to wash or dry
In did the drain screen, undid two nuts on top, removed panel, undid plastic ring, undid two screws with but driver, pulled sensor up, dried up any water at bottom, installed new sensor and follow steps in reverse. It worked!!!
Read more...
Related General Electric Dishwasher Parts
- All General Electric Dishwasher parts
- General Electric Dishwasher Brackets and Flanges
- General Electric Dishwasher Caps and Lids
- General Electric Dishwasher Circuit Boards and Touch Pads
- General Electric Dishwasher Dispensers
- General Electric Dishwasher Doors
- General Electric Dishwasher Drawers and Glides
- General Electric Dishwasher Ducts and Vents
- General Electric Dishwasher Elements and Burners
- General Electric Dishwasher Filters
- General Electric Dishwasher Grilles and Kickplates
- General Electric Dishwasher Handles
- General Electric Dishwasher Hardware
- General Electric Dishwasher Hinges
- General Electric Dishwasher Hoses and Tubes
- General Electric Dishwasher Insulations
- General Electric Dishwasher Knobs
- General Electric Dishwasher Latches
- General Electric Dishwasher Legs and Feet
- General Electric Dishwasher Lights and Bulbs
- General Electric Dishwasher Manuals and Literatures
- General Electric Dishwasher Motors
- General Electric Dishwasher Panels
- General Electric Dishwasher Power Cords
- General Electric Dishwasher Pumps
- General Electric Dishwasher Racks
- General Electric Dishwasher Seals and Gaskets
- General Electric Dishwasher Sensors
- General Electric Dishwasher Spray Arms
- General Electric Dishwasher Springs and Shock Absorbers
- General Electric Dishwasher Switches
- General Electric Dishwasher Timers
- General Electric Dishwasher Trays and Shelves
- General Electric Dishwasher Trims
- General Electric Dishwasher Valves
- General Electric Dishwasher Wheels and Rollers