General Electric Dishwasher Circuit Boards and Touch Pads

Your Price

$89.95

General Electric Dishwasher Main Control Board

★★★★★

7 Reviews

PartSelect Number PS16873737

Manufacturer Part Number WD21X32165

This main control board is a genuine OEM part that is designed for dishwashers. It is responsible for controlling the operation of the dishwasher. It monitors all the dishwasher cycles including wash, rinse, dry, and sanitization. It receives input from the control panel and sends commands to various components of the dishwasher, such as the motor, pump, heating element, and sensors, to control the different cycles and functions of the appliance. Signs of a faulty control board include an unresponsive control panel, error codes, interrupted wash cycles, or a burning smell, which indicates a short circuit.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Glen from WARDEN, WA

Dishwasher stopped working

This didn't work out well. At the beginning of September the control panel in the door started to work erratically, the lighted buttons did not light up as expected. I ordered a replacement board and installed it.
CONFIGURED UI SERVICE CONTROL Part #: PS16618944
This did not help, so I ordered another control board and installed it.
CONFIGURED SERVICE MACHINE CONTROL BOARD
Part #: PS16226072.
This did not help. This control board has a small orange fuse that looks like an old fashioned transistor. it was fine, as was the fuse on the previous control board.
There were two things about the Control boards that might help someone figure out what went wrong. When I took out the original control board, there was evidence of component overheating. When I installed the new control board there was a green light that was blinking.
I had hoped to complete this repair, but we have been without a dishwasher for over a month, so I bought a new one.
(I am a competent Instrumentation and Controls technician)
It could be that there is a bigger issue here; a major component failure.
If anyone has some suggestions to try, I would like to repair the machine and sell it as a used appliance. Read more...

Your Price

$218.15

General Electric Dishwasher Configured User Interface Control Board

★★★★★

36 Reviews

PartSelect Number PS17137058

Manufacturer Part Number WD21X31902C

This is the user interface control board for various dishwashers. The user interface panel is what you directly interact with on your dishwasher to start and stop it and select the specific cycle you want. If your user interface panel is not responding and you have tested your dishwasher to ensure no other part could be at fault, it will need to be replaced immediately for it to regain function. Replacing this panel will requires some disassembly of your dishwasher, and will require tools like a screwdriver, wrench, and a pair of pliers. This OEM user interface panel measures approximately 14-inches wide and is sold individually.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Brian from MANSFIELD, MA

Dishwasher was randomly beeping when not in use. Then eventually the display wouldn’t light up.

I first tested for 120volts to my dishwasher to verify it was getting power from my electrical panel. Then tested pins 2 and 5 on the control board to make sure there was 14 volts going to the user interface harness. After I verified that I knew it was the user interface that was bad. I watched a video I found on YouTube and followed it. This repair was fairly easy while watching the video and making sure that you use the correct pin out that comes in the box for your model. I’m not an appliance repair person and it took me about an hour start to finish. I’m going to attach the video I https://youtu.be/TI8cUjy5YOE

https://www.youtube.com/watch?v=GN5t4VFgLCY Read more...

Your Price

$72.22

General Electric Dishwasher Configured Ui Board

PartSelect Number PS16762507

Manufacturer Part Number WD21X31909

Introducing the Configured UI Board by GE, specifically designed for impeccable performance and lasting durability. This crucial component ensures seamless operations of your appliance by facilitating smooth user interface functions. Crafted with meticulous attention to quality, the GE Configured UI Board sustains optimal functionality while promising uncompromising reliability for your appliance. This component part ensures that your appliance runs efficiently and withstands the test of time. Invest in GE excellence and enhance your appliance's performance with this Configured UI Board. Exceptional performance and reliability are just a click away.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

John from DANBURY, CT

UI Control panel would not light up and not work at all. Unplugging D/W failed to correct.

Unplug the dishwasher. Remove toe kick with 1/4 socket. Unplug, by pinching, door harness connector (White terminal connector) from PC board at bottom of dishwasher. Remove the door door using the Allen wrench, place it the hole on side of door hinge where pulley attaches. Unhook the pulley attachment at the door by using a vise grip to pull the plastic up and out. Don't break the plastic! Do the same for the other side. Remove Allen wrench. Pull door in and up at the same time. Take off 2 screws at bottom of door using 1/4 or 5/16 socket. Remove the vent cover (cap) using 2 flat head screwdrivers to loosen. Unscrew by hand. Slide toward the bottom, the inner door panel off from the outer door panel. You will see the door wire harness and some styrofoam insulation. Stand with outer door facing away from you. Remove UI by holding door handle, pressing it and pull the control head, up and away from you. It should come off from the top off the outer door panel. The UI will need to be removed from this housing. Unplug the UI harness connector. Remove 7 screw with a Phillips screwdriver or 1/4 socket. There are 2 clear plastic clips that need to be pressed in to release UI from the housing. Be careful, those clips are easy to snap. Place and snap new UI into the housing. Replace 7 screws. Reattach the connector pug to the new UI board. My personality was factory set. So, no jumper pins on my board. Snap the UI housing back onto the top of your door. Delicately, remove the styrofoam and unsnap the old harness to the soap and drying dispenser. Remove the rest of the old harness. Install the new door harness and use the plastic plugs on the harness to secure to the door. Install the styrofoam insulation. Attach the inner door panel to the outer door panel by sliding inner pan up toward the top. Replace the 2 screws at the bottom of the door. Attach vent cap by hand screwing it on. Position door at the dishwasher. Use Allen wrench or helper to hold at correct angle. Use a vise grip to grab the plastic pulley to attach it to the door hinge. Do the same on the other side. Plug in the harness connector to the PC board. Plug in the dishwasher and the UI should light up! Run a load and make sure no leaks are seen around the door. Replace toe kick. Read more...

Your Price

$76.39

General Electric Dishwasher Configured Ui Board

★★★★★

1 Review

PartSelect Number PS16762502

Manufacturer Part Number WD21X31904

This GE Configured UI Board is a crucial piece for maintaining the function of your dishwasher. It serves as the user interface, showcasing dishwasher settings while enabling you to choose your desired cycle quickly and easily. Though this component is robust and built to last, it is recommended to wear work gloves while installing it for safety. However, before beginning the installation process, it's vital to disconnect the appliance from the power source. Choose this product for a seamless, efficient operation of your dishwasher.

Fixes these symptoms

Will Not Start
See more...

Your Price

$133.81

General Electric Dishwasher Configured Ui Board

★★★★★

7 Reviews

PartSelect Number PS16762508

Manufacturer Part Number WD21X31910

The user interface displays the dishwasher settings and lets you select the cycle.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

DONALD from GOSHEN, IN

Most of the lights on the control panel had stopped working. There was no way to change the settings of the dishwasher.

When the part arrived, I was pretty sure it was the wrong part. The replacement part had an LED on it -- a box that stuck up about an inch above the circuit board. My dishwasher did not have an LED readout and I was pretty sure the LED would not fit in the space that was available. I was reluctant to take the dishwasher apart until I had the right part. The people at Part Select were helpful and together we looked at the schematic which did, indeed, seem to show a box sticking up from the circuit board. A YouTube video showed me how to take the door off its hinges, unscrew 4 screws and slide the inside of the door upwards. The circuit board went in fairly easily. There was space for the LED (even though it still doesn't show through the top) and now the lights work. Read more...

Your Price

$75.41

General Electric Dishwasher Configured Ui Board

★★★★★

5 Reviews

PartSelect Number PS16762497

Manufacturer Part Number WD21X31898

Elevate your dishwasher's performance with a GE-configured User Interface Board. This essential appliance component illuminates your dishwasher's settings and assists in the selection of cleaning cycles. Prior to installation, be sure to disconnect the power for safety purposes. To safeguard your hands from potential harm during the installation process, we recommend using work gloves. Trust in the reliability and durability that comes with every GE product. Enhance the functionality of your dishwasher with this GE User Interface Board.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Robert from NEW CARLISLE, OH

Dishwasher dead

Repaired with the help of You Tube videos. To repair: remove door (note! the door can be removed without pulling the dishwasher out, or disconnecting spring cables). To remove the door insert allen wrench in holes under door to hold the door in the remove/ install position. separate the inner and outer door (easily done) then remove and replace the User interface board. The hardest part was locating the holes to insert the allen wrenches (or anything similar) in to. Dishwasher worked after repair. In my case the dishwasher would come back to life for a short period if I turned the power off, and back on. I read somewhere that was a symptom of the bad UI board. I was lucky because that was the problem. Read more...

Your Price

$13.95

General Electric Dishwasher 4.1 Amp Control Board Fuse

PartSelect Number PS12743197

Manufacturer Part Number WD21X25696

Introducing the GE Control Board Fuse 4.1 AMP, a critical component for your dishwasher maintenance. This 4.1 AMP fuse plays an integral role in safeguarding your dishwasher by promptly cutting off power when the dishwasher is at risk of shorting out or overheating. Before installing this essential part, it's vital to disconnect the dishwasher or turn off the house circuit breaker. It's also recommended to wear work gloves during the process for safety. This high-quality GE part is designed to ensure optimal functioning and longevity of your appliances, providing peace of mind with every wash.

Fixes these symptoms

Will Not Start
See more...

Your Price

$115.38

General Electric Dishwasher Configured Ui Board

★★★★★

7 Reviews

PartSelect Number PS16762498

Manufacturer Part Number WD21X31899

Introducing the GE Configured UI Board, an essential staple for your dishwasher maintenance and repair needs. This easy-to-install, front control board service kit serves the integral role of displaying your dishwasher's settings, making cycle selection a breeze. Prior to starting installation, remember to disconnect the power for safety purposes. Donning work gloves during the procedure is recommended to protect your hands. Trust in the quality and reliability of GE to keep your dishwasher running at its peak performance. Enjoy the technology and convenience of this efficient user interface kit.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Jason from TULARE, CA

No power to user interface. User interface was beeping for weeks before it powered down.

*Unplug the dishwasher. My drain hose was long enough so no need to disconnect.
Access the motherboard and found a solid green light. This indicates the motherboard is not communicating with the user interface.

Door removal:
- removed kick plate
-unplugged door wire assembly and wire harness clip
-Unscrewed dishwasher from cabinet and pull dishwasher out about 6 inches
-Detached pulley rope assembly from door hinge
-Open door about 4 inches and pull up and towards me.
-Lay the door down, removed vent cap and four T20 screws from the side bottom, remove two 1/4 inch bolt from each hinge(the hinges have four bolts, but only to need to be removed)
-push up on the plastic inner door from outer door and set aside.
-Unscrew four 1/4 inch bolts holding user interface and unplug wire assembly. (The two middle screws are longer than the two outer screws)
-be sure to ground yourself before touching the new user interface board
-read the instructions for the new interface board clip positions(mine was already position correctly)
-Assemble the door and be sure to connect the wire assembly and harness clip. Read more...

Your Price

$130.90

General Electric Dishwasher Configured Service Machine Control Board

★★★★★

3 Reviews

PartSelect Number PS16873735

Manufacturer Part Number WD21X32163

Transform your dishwasher's performance with the GE Configured Service Machine Control Board. This indispensable component plays a crucial role in managing the critical functionalities of your dishwasher, from washing and draining, to drying. This control board is designed for seamless installation, however, it's recommended that the dishwasher be unplugged before installation. To ensure personal safety, the use of work gloves is highly advisable. Trust GE's commitment to quality and enhance your dishwasher's performance today. Remember, your home deserves the best, and with GE, that's exactly what you get.

Fixes these symptoms