Kenmore Washer Switches

Popular Kenmore Washer Switches

Your Price
$45.93
  In Stock
Kenmore Washer Lid Switch
★★★★★
★★★★★
77 Reviews
PartSelect Number PS11745957
Manufacturer Part Number WP8318084
This part is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire. If your machine is having trouble starting, is not agitating, spinning, or is not draining properly, this could be because the lid switch has broken. You will need a 5/16-inch nut driver for this repair. The package will contain one lid switch. You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release the old lid switch.
Fixes these symptoms
  • Burning smell
  • Cycle Not Advancing
  • Lid or door won’t close
  • See more...
Installation Instructions
Clint from Kansas City, KS
Washer wouldn't run
I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side. To remove the switch, I first detached the wire to the control panel and unscrewed the grounding wire. The new switch drops right in. I had a little trouble getting it in until I realized the washer lid had to be open. A little awkward but once it's in you can shut the lid and then I reattached the wire from the control panel and screwed in the grounding wire. Pretty easy. $20 for the part (with shipping) and 15 minutes. Way cheaper than a repairman. Read more...
Your Price
$111.56
  On Order
Kenmore Washer Front Load Door Lock and Switch Assembly
★★★★★
★★★★★
30 Reviews
PartSelect Number PS12364048
Manufacturer Part Number 131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the door does not open or lock. Your washer will not start if the door does not lock. This part is also known as a washing machine door lock assembly. As per the manufacturer, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.
Fixes these symptoms
  • Leaking
  • Lid or door won’t close
  • Locking Issues
  • See more...
Installation Instructions
DOUG from KING FERRY, NY
Door on washer wouldn't lock or start
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Read more...
Your Price
$47.19
  In Stock
Kenmore Washer Lid Switch
★★★★★
★★★★★
85 Reviews
PartSelect Number PS11722098
Manufacturer Part Number 3949247V
This switch (Lid Switch Assembly With Leads, Washer Lid Switch, Lid Switch Assembly, Washer Lid Switch) tells the washing machine that the lid is closed, which allows the wash cycle to begin. The lid switch mounts to the underside of the cabinet top panel. The plastic on the actuator can become brittle with age and break when the lid is closed roughly. It can also break from the movement of an unbalanced load causing parts of the washer to strike it. This part must be replaced if it is broken and no longer being activated by closing the lid (indicated by the washer not agitating properly, or the machine not detecting the lid is closed). This switch is black plastic with wire leads. It is sold individually.
Fixes these symptoms
  • Spinning Issues
  • Will not agitate
  • Will not drain
  • See more...
Installation Instructions
Susie from BRANDON, MS
The washer would fill with water and wash,but would not drain and spinn out .
Followed direction that was sent to my e-mail. My washer timer would not advance. I' am so happy for the directions sent to me from this site and being able to get the part that I, needed from this site. I, didn't have and business doing the job myself, because I'm a ill 66 year old female. There's no special instructions that I, have to add. !! Thanks !! Lewis Read more...
Your Price
$55.48
  In Stock
Kenmore Washer Water Level Switch
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11754877
Manufacturer Part Number WPW10448876
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
Fixes these symptoms
  • Draining Issues
  • Water Filling Issues
  • Will not drain
  • See more...
Installation Instructions
George from ORO VALLEY, AZ
Door locked because of faulty water level switch
First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping. Read more...
Your Price
$37.38
  In Stock
Kenmore Washer Lid Switch Assembly
★★★★★
★★★★★
90 Reviews
PartSelect Number PS11742021
Manufacturer Part Number WP3949238
This part comes with a three-wire lead. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
Fixes these symptoms
  • Lid or door won’t close
  • Will not agitate
  • Will not drain
  • See more...
Installation Instructions
Nicola from Centreville, MD
Washer would not run, lid switch broken
Repair was easy. Removed two side panels on the control plate. Removed two phillips screws that hold the control panel to the body of the washer. Disconnected the electic connection to the wires leading to the lid switch. Three sided of the lower cover lift over and removed from the washer frame. Access to the lid switch and wire retainers was easy. Removed two screws holding the remaining parts of the switch and replaced with new. Re-routed the wires through the retainers. Set the sides back on making sure the set all the way back in the frame and fit properly into the plastic strips on the back of the washer. Reconnected wires, screws and end caps. Read more...
Your Price
$23.67
  In Stock
Kenmore Washer Lid Switch
★★★★★
★★★★★
16 Reviews
PartSelect Number PS11723153
Manufacturer Part Number W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
Fixes these symptoms
  • Will not agitate
  • Will not drain
  • Will Not Start
  • See more...
Installation Instructions
Peter from Westbury, NY
washer would not start
To see if the lid switch was the problem I first jumped it out and tried to start the washer. That was the problem. I removed the main controll so I could get to the lid switch. I made the mistake of removing the screws all the way out and the metal clip fell into the body of the washer, no problem since I was changing the drive beld anyway. I realized that you do not remove the screws all the way out, you just have to loosen them and then slide out the lid switch & then replace it. Read more...
Your Price
$162.20
  In Stock
Kenmore Washer SWITCH ASSEMBLY
★★★★★
★★★★★
5 Reviews
PartSelect Number PS7792232
Manufacturer Part Number EBF61315802
This is a door lock switch, compatible with various models of LG washing machines. This door lock switch is designed to communicate to the control board when the door of the washer is closed, so the door can lock and allow the washing cycle to safely begin. If your washer is having difficulty locking before it begins its washing cycle, or if it has difficulty starting in general, you may need to replace this lock switch. This switch is made primarily of black, gray, and white plastic, and will require a screwdriver/drill, and a pair of needle nose pliers to replace. This door switch is a genuine OEM part that will require you to disassemble part of your washing machine to completely replace it.
Fixes these symptoms
Installation Instructions
CURTIS from OLIVE BRANCH, MS
Washer did not recognize the door was shut
I removed the Wire and spring from the tub seal and then removed the seal on the side of the washer that contains the Door switch. I removed the two screws that held the door switch in place while holding the switch with my other hand. Once the screws where out I pulled the switch assembly out thru the gap and removed the wires from old assembly. I then plugged the wires into the new assembly aligned the holes up and put the screws back in the new door switch assembly. I then put the door seal and tub seal holder back on. This took about 15 minutes. I do recomend that you unplug the washer before starting this process. Read more...
Your Price
$49.32
  In Stock
Kenmore Washer Switch Assembly,Sensor
★★★★★
★★★★★
4 Reviews
PartSelect Number PS3529177
Manufacturer Part Number 6501EA1001R
This water-level pressure switch in your wash monitors and regulates the water levels throughout the fill, wash, and rinse cycles. You will usually find it inside the control panel or near the tub. It ensures that the washer uses the appropriate amount of water for each cycle and load type. This genuine OEM assembly includes not only the switch itself but also the accompanying air dome tube.
Fixes these symptoms
Your Price
$44.92
  In Stock
Kenmore Washer Lid Switch Assembly
★★★★★
★★★★★
30 Reviews
PartSelect Number PS334600
Manufacturer Part Number 285671
This part makes sure that the lid is shut before allowing the machine to start or agitate.
Fixes these symptoms
  • Will not agitate
  • Will not drain
  • Will Not Start
  • See more...
Installation Instructions
Fred from Midlothian, VA
Washing Machine kept cutting off mid-cycle
I had to remove the washing machine from the laundry room (our laundry room is pretty small).

I read the do-it-yourself explanation posted by Paul From Glendale CA and followed his instructions.

1. Unplugged the Washer and disconnected the hoses, so I could slide the washer into the kitchen.

2- Unfastened the two screws in the front lower corners of the controls panel and tilted is back. Unfastened the old lid-switch wiring from the control panel.

3. Remove the clips at the two corners under the control panel. I rotated the cover forward to clear it from the back and lifted it off and set it off to the side.

4. While I had the Washer disassembled I vacuumed out all the accumulation of dust, etc.

5. Removed the lid switch and unfastened the ground wire.

6. Installed the new switch and reassembled the Washer.

7. I did not read Paul's reassembly instructions closely enough. The front flange of the cover goes UNDER the steel frame on the washer. I spent 30 minutes trying to get the cover on, then finally figured that out on my own. Once I got the flange under the frame, it took about five minutes to get the cover on, the clips in and the control panel back into positions and reassembled.

The entire process is not particularly difficult. Had I read the "UNDER the frame" part earlier, the entire repair would have taken no more than 45 minutes.

Having another person to help reinstall the cover would be helpful. The cover is not heavy but it is a little awkward to handle and having another person to help line up the back cover, etc. will make the reassembly even easier.
Read more...
Your Price
$118.71
  In Stock
Kenmore Washer Water Level/Pressure Switch
PartSelect Number PS11755855
Manufacturer Part Number WPW10514214
This water level switch senses the level of water in the inner tub.
Fixes these symptoms
Installation Instructions
Joseph from BINGHAMTON, NY
Washer was reporting F20 (Water Pressure)
After removing the Top Cover and back cover by removing the 3 screws for the top and 10 screws on the back cover to expose the interior of the machine. Remove the rubber hose that was attached to the bottom of pressure switch. Pushed gently upward on the pressure switch until it popped out. Gently press down on the 2 small tabs on the plug and then gently pull the plug out. Placed new pressure switch in place, plugged the connector back into the switch. Also doubled checked the hose to ensure that the tubing has not rubbed a hole it from rubbing on the concrete counter balance. If yes then remove the tube from the bottom of the washer and replace with approximately 2 feet of 3/16 inner diameter/1/4 outer diameter tubing. Attach the new tubing to the bottom of the washer port and the pressure switch. Attach the new tub to the water discharge hose using tie wraps or electrical tape to ensure not to occur again. Read more...

Related Kenmore Washer Parts