Craftsman Snow Blower Bearings

Your Price

$9.89

Craftsman Snow Blower Hex Flange Bearing

PartSelect Number PS9178250

Manufacturer Part Number 941-0245

Used mainly in snow blowers, this flange bearing is typically installed on the axle and creates a tight fit with little friction while still allowing for movement.?Your equipment will likely feature multiple of these bearings, so refer to any diagrams for your model to determine whether you will need one, or more. This is an OEM part that is sold as an individual item and has a 0.75-inch inner-diameter, 1-inch outer-diameter, and 1-inch height.

Your Price

$9.08

Craftsman Snow Blower Lawn Mower Ball Bearing

PartSelect Number PS8887153

Manufacturer Part Number 1705897SM

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lubricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

Your Price

$6.54

Craftsman Snow Blower Bearing Flange

PartSelect Number PS9174338

Manufacturer Part Number 9517MA

Your Price

$12.55

Craftsman Snow Blower Bearing, Axle

PartSelect Number PS8871773

Manufacturer Part Number 1501114MA

Your Price

$6.28

Craftsman Snow Blower Bushing

PartSelect Number PS8881538

Manufacturer Part Number 1667588SM

Sourced directly from the original manufacturer, this Bushing is used to reduce friction on your snowblower. It is made of durable white plastic, is not part of a kit or assembly, and is sold individually. This part should be replaced if it is worn or damaged, and you may experience problems operating the chute if it is malfunctioning. You will need a wrench, a socket set, and pliers to complete this repair. Customers rate this repair as Medium difficulty.

Your Price

$13.73

Craftsman Snow Blower Flange Bearing

PartSelect Number PS9166232

Manufacturer Part Number 941-0598

This metal flange bearing is an authentic manufacturer-sourced component which is designed for use in lawn and garden outdoor equipment. It is bronze in color, with 6 six flat sides, and it has an inner diameter of 0.75 inches, and a height of 1 inch. It also features a protruding circular rim on one end, known as a flange, which keeps the bearing stable and secure. The bearing serves as a support mechanism, allowing rotating parts to move smoothly with minimal friction. Over time the bearing may wear down, crack, or fall off causing excessive noise, reduced performance, and potential damage to the snowblower impeller or auger. Use a bearing puller tool to pry the bearing off the equipment. Align the new flange bearing with the mounting holes and secure it in place.