Amana Range Elements and Burners
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Amana Range Elements and Burners
Your Price
$49.31
In Stock
Amana Range Oven Bake Element
PartSelect Number PS11752501
Manufacturer Part Number WPW10308477
This bake element is located at the bottom of the oven to supply heat and it has push-on terminals. If your baking element is burnt out, the heat is not consistent, or is defective, then replacing the element could be a solution to your appliance problem. The tools needed for this replacement are: a screwdriver and needle-nose pliers. The first step in is to unplug the range or shut off the house circuit breaker before starting. Unscrew the black of the oven cavity to pull out wires from the defective element. Reconnect wires to the new element and screw it back on. Make sure the element is sitting flat.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven is too hot
- See more...
Installation Instructions
Esther from San Antonio, TX
heating element burnt up
first I pulled the stove from the wall. Then unplugged the stove from the wall (electric stove) for safety. then I removed the middle back panel screws(2) and then the panel. I then pulled the wires off the heating element that was bad. I took the screws (2) off the heating element inside the oven. I had to use WD-40 to loosen the screws because with the heat they were really stuck. I removed the heating element and replaced it with the one I got through partselect.com. Put everything back and walla finished. Partselect.com sent me the right part at the right price and fast. No hassles at all.
Read more...
Your Price
$39.95
In Stock
Amana Range Oven Bake Element
PartSelect Number PS11744404
Manufacturer Part Number WP74010750
This bake element is for the bottom of your oven. The bake element supplies heat for baking. If you find there is little to no heat when baking, a burned out bake element, or food is taking too long to cook, these symptoms could be solved by replacing the bake element. Before starting this replacement, make sure the range is unplugged from the power source or shut off from the house circuit breaker. The tools needed is a Phillips screwdriver. For safety reasons, make sure to wear gloves.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven is too hot
- See more...
Installation Instructions
Heather from Huntsville, AL
The element broke in two pieces after food dried on it.
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Read more...
Your Price
$79.19
In Stock
Amana Range Oven Bake Element
PartSelect Number PS11752540
Manufacturer Part Number WPW10310274
This bake element is found on the bottom of the oven. his bake element is for ranges.
The bake element is at the bottom of the oven and supplies the heat for baking.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Elaine from Orfordville, WI
needed new element. Old one burnt in two
unscrewed and unplugged the old one and plugged in and screwed in the new one. EASY!
Read more...
Your Price
$86.79
In Stock
Amana Range Oven Bake Element
PartSelect Number PS340505
Manufacturer Part Number 326791
This bake element is a partially open tapered style with push on wire terminals.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- Oven not heating evenly
- See more...
Installation Instructions
Chad from Bloomington, MN
Baking element in oven exploded
Removed the broken element by taking out the two screws in the back wall of the oven and unplugging the wires. Then did reverse to install the new element. Very simple repair job.
Read more...
Your Price
$35.63
In Stock
Amana Range Surface Burner 8 2600w
PartSelect Number PS11743367
Manufacturer Part Number WP660533
The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replace the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Jonathan from Lilburn, GA
8 inch burner wouldn't come on. Wires shorted out
One screw holds the block onto the stove top. Had to clean out fitting for phillips screwdriver or screw would have stripped because it was old with lots of buildup. Even cleaned out, this screw required great force with phillips screwdriver to keep from stripping. Caution! If you strip it, you'll have to drill it out! The rest was a snap. Cut the old wires leading to the old block (not too close to where wires disappear into back of stove, though!). Strip insulation off both wires and attach with the connectors that came in the kit. Then push the wires into the block, and finally, attach the block back to the stove top (new screw is supplied). Restore power and everything should be fine. One problem: Roper/Whirlpool built their appliance in such a way that when the connector block shorts out, it usually takes the infinite switch with it. So I ended up having to go back and purchase that switch as well (which just so happens to cost twice to three times as much!). If you put it all back together and it still doesn't work, that's probably what happened, so go ahead and remove the knob panel and check that switch (it's right behind the control knobs on the front). You will probably find a burned connector at the back top left or the switch. Don't forget to write down which wire goes where (or just take a picture of it).
Read more...
Your Price
$81.24
In Stock
Amana Range Dual Radiant Surface Element
PartSelect Number PS16543522
Manufacturer Part Number W11517959
This is a dual surface element for compatible ranges. If the surface heating element for your range is currently not turning on or has issues heating up or maintaining a heat level, it will need to be replaced. This surface heating element features two burners, one smaller involving an inner 1400W element, and one larger burner involving both the inner and outer ones (3000W). Replacing this dual surface element will require a screwdriver or drill, as well as wire cutters and needle-nose pliers. This surface element is sold as an individual OEM part, so you may need to consider how many heating elements you need before ordering.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
MELISSA from CHAPLIN, CT
Your Price
$123.20
In Stock
Amana Range 6" Surface Element, 1200 W
PartSelect Number PS12348164
Manufacturer Part Number W11171119
Sold individually.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Terry from Rockwall, TX
Surface Element Out
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
Read more...
Your Price
$75.83
In Stock
Amana Range Bake Element
Remove two Phillips screws, unplug element, reverse for installation.
Did not correct the issue.
After replacing the oven temperature control also, it turned out the control board was the issue all along. Read more...
PartSelect Number PS12348633
Manufacturer Part Number W11182108
This bake element is an OEM replacement part designed for use in select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef ranges, ovens, and stoves. It is responsible for providing heat at the bottom of the oven, which is essential for proper baking. If your oven is not heating correctly or you're experiencing uneven baking, replacing the bake element is a likely solution. To replace the bake element, always unplug the oven or turn off the house circuit breaker before starting. The element is located at the bottom of the oven, where it supplies the heat for cooking. After removing any oven racks, disconnect the old element from the electrical connections and remove any screws securing it. Install the new element by aligning and securing it in place, then reconnect the wiring. Verify that the new bake element is functioning by testing the oven after restoring power.
Fixes these symptoms
- Element will not heat
- Little to no heat when baking
- See more...
Installation Instructions
Darin D from MASON, TN
No heat in oven
Broiler worked, Oven did not. Remove two Phillips screws, unplug element, reverse for installation.
Did not correct the issue.
After replacing the oven temperature control also, it turned out the control board was the issue all along. Read more...
Your Price
$28.32
In Stock
Amana Range Y-frame Surface Burner (6 In)
The drip pans were simple to replace, as was the new burner element. My old one had broke and was still working, but I decided to replace it when I ordered the drip pans.
Everything was easy to install and it looks like a brand new new stove top! I saved a lot of money doing it myself. Read more...
PartSelect Number PS11743366
Manufacturer Part Number WP660532
The standard y-frame surface burner provides heat to your range. If you notice that your element will not heat, you may need to replace your surface burner. This product is 6 inches in diameter, and 1500W. The manufacturer suggests replacing the receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy, and you will not need any tools. To complete the repair, simply lift out the old burner and replace it with the new one. Check that the burners are turned off before you begin this repair.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Laurie from Tequesta, FL
Burner element broke and drip bowls needed to be replaced.
I went to the local discount mart and bought drip bowls. The ones available at that store did not fit, so I decided to buy directly from the stove's manufacturer distributor.The drip pans were simple to replace, as was the new burner element. My old one had broke and was still working, but I decided to replace it when I ordered the drip pans.
Everything was easy to install and it looks like a brand new new stove top! I saved a lot of money doing it myself. Read more...
Your Price
$124.21
In Stock
Amana Range Dual Surface Element 2500w/1200w
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done Read more...
PartSelect Number PS11764902
Manufacturer Part Number W10823692
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and heats up the area directly above it. You will need to replace the element if it does not heat up properly. As you will be working around electricity, be sure that your range is disconnected from power before you begin this repair. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
GEORGE from NEWNAN, GA
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
turned off powerremoved ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done Read more...
Related Amana Range Parts
- All Amana Range parts
- Amana Range Brackets and Flanges
- Amana Range Caps and Lids
- Amana Range Circuit Boards and Touch Pads
- Amana Range Cooktops
- Amana Range Doors
- Amana Range Drawers and Glides
- Amana Range Drip Bowls
- Amana Range Fuses
- Amana Range Grates
- Amana Range Handles
- Amana Range Hardware
- Amana Range Hinges
- Amana Range Hoses and Tubes
- Amana Range Igniters
- Amana Range Insulations
- Amana Range Knobs
- Amana Range Latches
- Amana Range Lights and Bulbs
- Amana Range Panels
- Amana Range Power Cords
- Amana Range Racks
- Amana Range Seals and Gaskets
- Amana Range Switches
- Amana Range Thermostats
- Amana Range Trims
- Amana Range Valves
- Amana Range Wire Plugs and Connectors