Amana Range Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Amana Range Switches
Your Price
$54.00
In Stock
Amana Range Surface Burner Element Switch 8
PartSelect Number PS11740783
Manufacturer Part Number WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Oven not heating evenly
- See more...
Installation Instructions
chaz from fairplay, CO
the element did not turn compleatly off, the on light stayed on.
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire from the old switch and replaced them in the same position on the new switch. inserted new switch into the stove and attached the 2 screws. replaced back panel and pluged in stove. all tested well
Read more...
Your Price
$72.22
In Stock
Amana Range Dual Element Control Switch
PartSelect Number PS11754687
Manufacturer Part Number WPW10434452
This dual element control switch is designed to regulate heat for dual surface burners on select electric ranges. It provides precise temperature control and helps restore functionality when a burner fails to heat, won’t start, or operates inconsistently. Compatible with various models from Whirlpool, Maytag, KitchenAid, and Amana, this genuine replacement part is not universal. Always verify your appliance’s model number before purchasing to ensure proper fit and performance.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- See more...
Installation Instructions
Dale from POUND, WI
Switch worked off and on but you could not set heat to a specified temperature.
Remove back panel 10 screws. Disconnect plug in fixture from switch. Front of range remove knob (it just pulls out) remove 2 screws, remove switch. To install reverse procedure.
Read more...
Your Price
$50.36
In Stock
Amana Range Infinite Control Switch
PartSelect Number PS11740785
Manufacturer Part Number WP3149404
This switch controls the stove top 6" surface burner.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Installation Instructions
Bruce from Pasadena, MD
The old switch broke off.
Removed two screws that held the unit in then pulled out a few inches so I could see where the 5 wires were. Then I replaced one at a time till done. then replaced the retaining screws.
Read more...
Your Price
$54.01
In Stock
Amana Range Infinite Switch For 8 Inch Burner
It was fairly easy to take the "Control Deck" off the top of the range by removing about 8 screws. I leaned the deck forward without removing any wires except a green ground that was held on by one of the screws.
There are two small screws under the switch knob holding the Infinite Switch to the panel. I removed these and let the switch hang on the wires. To avoid missplacing or crossing the wires... I moved one wire at a time to the new switch, then attached the switch to the panel and put it all back together.
Whole job was done in about 15 minutes Read more...
PartSelect Number PS11740775
Manufacturer Part Number WP3148953
This switch controls the stovetop surface burner.
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- See more...
Installation Instructions
RON from KAUFMAN, TX
The burner would keep heating after turning off the switch
Start by turning off the power to the range. It was fairly easy to take the "Control Deck" off the top of the range by removing about 8 screws. I leaned the deck forward without removing any wires except a green ground that was held on by one of the screws.
There are two small screws under the switch knob holding the Infinite Switch to the panel. I removed these and let the switch hang on the wires. To avoid missplacing or crossing the wires... I moved one wire at a time to the new switch, then attached the switch to the panel and put it all back together.
Whole job was done in about 15 minutes Read more...
Your Price
$140.60
In Stock
Amana Range Burner Switch
PartSelect Number PS11731368
Manufacturer Part Number W10857622
This dual surface element control switch is a genuine OEM replacement part designed to fit select models of stoves, ovens, and ranges. The control switch is an essential component that allows you to turn the surface element on and off, as well as regulate the amount of heat the element produces. If your stove’s surface element isn’t heating properly, fluctuates in temperature, or won’t turn off, replacing the control switch can restore full functionality. Before installation, ensure the range is unplugged, or disconnect the power at the house circuit breaker to avoid electrical hazards. The surface element control switch is usually located behind the stove’s front control panel. To install, remove the panel and disconnect the old switch from the wiring harness. Install the new switch by securing it in place and reconnecting the wiring to match the original configuration. After installation, turn the power back on and test the surface element to verify it operates correctly.
Fixes these symptoms
- Element will not heat
- See more...
Your Price
$34.95
In Stock
Amana Range 8 Infinite Burner Switch
PartSelect Number PS11744487
Manufacturer Part Number WP7403P239-60
This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Installation Instructions
Dennis from Hagerstown, MD
The Burner was getting too hot and you could not regular the tempature
Moved the Appliance out unplugged it and removed the backing plate then Remove the Knob and unscrew the infinite switch then marking the 5 wires to know where the go on the new switch, removing and replaced it with the new one
Read more...
Your Price
$50.44
In Stock
Amana Range Infinite Switch 6
2. Removed several screws that held the control block
3. Removed two screws that held the switch itself disconnected wires and removed switch
4. Reconnected all wires to new switch (no soldiering gun required)
5. Put control block back
Overall - very easy Read more...
PartSelect Number PS11740774
Manufacturer Part Number WP3148952
This part carries 5.2-6.6 amps.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Mikhail from Iowa City, IA
One of the heat elements in my oven would not heat
1. Disconnected power from my oven.2. Removed several screws that held the control block
3. Removed two screws that held the switch itself disconnected wires and removed switch
4. Reconnected all wires to new switch (no soldiering gun required)
5. Put control block back
Overall - very easy Read more...
Your Price
$70.65
In Stock
Amana Range Burner Switch
PartSelect Number PS12347916
Manufacturer Part Number W11162115
Introducing Whirlpool's Right Front Burner Switch, an authentic OEM sourced item designed to deliver improved functionality to your stoves, ovens, or ranges. Acting as a surface element control, this switch is essential for regulating the heat produced by your appliance, ensuring your cooking experience remains efficient and consistent. The installation process is straightforward, however, do disconnect the range or shut off the household circuit to ensure safety while fitting. We recommend the use of work gloves as a precautionary measure during the installation. Although parts may appear identical at glance, minor variations in size and shape might be evident, hence please verify the compatibility with your model prior to purchase. Flaunting a robust construction and superior efficiency, this Whirlpool burner switch is set to revamp the way you utilize your appliance.
Fixes these symptoms
- Element will not heat
- See more...
Your Price
$54.01
In Stock
Amana Range Dual Surface Burner Switch Kit
The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (terminal 2) to the new switch terminal P1. Also attach the jumper cable to P1 and "jump" it to S1.
Attach the orange wire (old switch terminal 5) to S2
Attach the yellow wire (old switch terminal 4) to 4a
Attach the tan/(white?) wire (old switch terminal 3) to terminal 4 on the new switch
Attach the single red wire from the right front element to terminal 2 on the new switch.
Attach the 'compound' red wires (the ones that come from the left rear/outlet connection and is also attached to the right rear switch) to terminal P2 on the new switch.
There is no need to seperate the compound red wires as the instructions might lead you to believe.
Good Luck Read more...
PartSelect Number PS2003583
Manufacturer Part Number 12002125
This switch is used to operate the dual surface burner.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Michael from Collierville, TN
Outer element of dual element burner didn't work
Remove Ceran Galss top by removing hex screws below the rim. Also remove the two opposing screws in the center of the downdraft opening. Ceran top comes off easily now.The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (terminal 2) to the new switch terminal P1. Also attach the jumper cable to P1 and "jump" it to S1.
Attach the orange wire (old switch terminal 5) to S2
Attach the yellow wire (old switch terminal 4) to 4a
Attach the tan/(white?) wire (old switch terminal 3) to terminal 4 on the new switch
Attach the single red wire from the right front element to terminal 2 on the new switch.
Attach the 'compound' red wires (the ones that come from the left rear/outlet connection and is also attached to the right rear switch) to terminal P2 on the new switch.
There is no need to seperate the compound red wires as the instructions might lead you to believe.
Good Luck Read more...
Your Price
$41.95
In Stock
Amana Range Infinite Switch For 6 Inch Burner
Ordered parts, they shipped same day. Arrived exactly as predicted. Totally non-stress. Can't find a thing to complain about.
Thanks PartSelect Read more...
PartSelect Number PS11744486
Manufacturer Part Number WP7403P238-60
The Infinite switch 6-inch surface element control from Whirlpool is the perfect solution for seamless control of your cooking range. Made from high-quality materials, this genuine OEM part ensures optimum performance and longevity. Designed specifically for ranges, this surface element control provides you with precise control over the heat produced by the surface element. It's crucial to unplug your appliance or switch off the house circuit breaker before installing this part. Always remember to safeguard your hands with protective gloves during the installation. Trust in Whirlpool's dedication to quality and enhance your range's functionality with this surface element control switch.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Robert from Santa Fe, NM
installed new switches and elements
just move one wire at a time. Each switch has 5 wires and I am sure mixing them would not be good.Ordered parts, they shipped same day. Arrived exactly as predicted. Totally non-stress. Can't find a thing to complain about.
Thanks PartSelect Read more...
Related Amana Range Parts
- All Amana Range parts
- Amana Range Brackets and Flanges
- Amana Range Caps and Lids
- Amana Range Circuit Boards and Touch Pads
- Amana Range Cooktops
- Amana Range Doors
- Amana Range Drawers and Glides
- Amana Range Drip Bowls
- Amana Range Elements and Burners
- Amana Range Fuses
- Amana Range Grates
- Amana Range Handles
- Amana Range Hardware
- Amana Range Hinges
- Amana Range Hoses and Tubes
- Amana Range Igniters
- Amana Range Insulations
- Amana Range Knobs
- Amana Range Latches
- Amana Range Lights and Bulbs
- Amana Range Panels
- Amana Range Power Cords
- Amana Range Racks
- Amana Range Seals and Gaskets
- Amana Range Thermostats
- Amana Range Trims
- Amana Range Valves
- Amana Range Wire Plugs and Connectors