Amana Range Igniters
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Amana Range Igniters
Your Price
$41.95
In Stock
Amana Range Oven Igniter
PartSelect Number PS11770066
Manufacturer Part Number W10918546
This flat style gas oven igniter has ceramic housing and comes with a connector.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking
- See more...
Installation Instructions
sharnette from baltimore, MD
our oven would not heat up
My husband pulled out the stove turned the gas off then he pulled out the part and replaced igniter....it took only about 20 min to do this job it was very easy and prior to us doing ourselves i called a well known company that does home repairs, I also called a few smaller businesses and to replace this part was anywhere from $175- 250 if not more. we are very very happy with our decision to replace the part ourselves unstead of spending extra money we didnt have .
Read more...
Your Price
$63.37
In Stock
Amana Range Oven Burner Igniter
PartSelect Number PS12348439
Manufacturer Part Number W11176454
This is an oven igniter for various ranges. This part is designed to ignite the gas from your oven and provide the heat output inside it. If your oven is having issues turning on or heating up properly, this igniter is likely bad or shorted, and in need of replacement. Replacing this igniter will only require a screwdriver and will simply need to be disconnected via its wire harness connection, and then reconnected with the new one. This igniter is an OEM part and is sold on its own, without any other parts.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking
- See more...
Installation Instructions
Steven from DOWNERS GROVE, IL
oven ignitor failed to light the oven
pulled out the stove and removed bottom drip plates to access the old ignitor. Removed 2 screws after unplugging the two wire ignitor. fished the the two wires thru back of stove and plugged them in where old wires were. put the 2 screws back into the new ignitor and tested before replacing drip plates. been cooking in the oven ever since, no problem.. Part was a perfect replacement.
Read more...
Your Price
$45.95
In Stock
Amana Range Bake Igniter
PartSelect Number PS11747217
Manufacturer Part Number WP9758079
This part ignites the gas to light the oven burner.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
- See more...
Installation Instructions
Greg from North Baltimore, OH
Bake/broil would not work
Replaced igniter and also DSI/direct spark igniter did not fix problem. Called out repairman turned out to be bad gas valve. Replaced that part , now stove works fine.
Read more...
Your Price
$52.97
In Stock
Amana Range Oven Igniter Vertical Mount Bake And Broil
Using the amp/multi meter I tested the connection between the igniters and the valve, with the oven turned on, to find the bad igniter. Depending on the model of stove you have, the amp reading you need for a properly functioning igniter will vary. My lower igniter read 2.7 amps with a rated amp between 3.3 and 3.6. So that was the culprit.
Replacing the igniter was easy. Two screws and a wire connected with a plug. I was able to do the diagnosis and unplug the wire without pulling the oven out. I pulled the drawer out and removed the two screws in a cover behind where the drawer was. You may not be so lucky…I have long arms.
I found removing the oven door made it easier to reach the igniter itself. To remove the door just open it slightly and pull up, it should come off easy…and replace in opposite manner.
Keep track of your screws and put it back together the way you found it except for the igniter that is.
Anyone with moderate technical skill could easily do this repair. The diagnosis is the hard part. I estimate I saved about $200 doing it myself.
Good luck. Read more...
PartSelect Number PS2085070
Manufacturer Part Number 74007498
This broil igniter assembly comes with its own metallic mounting bracket and a 7-inch-long dual wire lead with a plastic plug. This part will need to be repaired if your oven element is giving off no heat or very little, or is not heating evenly. You may also notice a smell of gas. The ignitor may still be glowing, but could still have gone bad.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
- See more...
Installation Instructions
James from Berwick, ME
Oven wouldn’t heat up properly
My oven has two igniters so I needed to determine which one was the problem. Using the amp/multi meter I tested the connection between the igniters and the valve, with the oven turned on, to find the bad igniter. Depending on the model of stove you have, the amp reading you need for a properly functioning igniter will vary. My lower igniter read 2.7 amps with a rated amp between 3.3 and 3.6. So that was the culprit.
Replacing the igniter was easy. Two screws and a wire connected with a plug. I was able to do the diagnosis and unplug the wire without pulling the oven out. I pulled the drawer out and removed the two screws in a cover behind where the drawer was. You may not be so lucky…I have long arms.
I found removing the oven door made it easier to reach the igniter itself. To remove the door just open it slightly and pull up, it should come off easy…and replace in opposite manner.
Keep track of your screws and put it back together the way you found it except for the igniter that is.
Anyone with moderate technical skill could easily do this repair. The diagnosis is the hard part. I estimate I saved about $200 doing it myself.
Good luck. Read more...
Your Price
$27.95
In Stock
Amana Range Top Burner Igniter
PartSelect Number PS2082000
Manufacturer Part Number 74004053
This is a surface burner igniter, also known as a top burner ignitor and stove top spark electrode. It is used to generate the spark that lights the surface burner. If your stove will not start, element does not heat, or gas igniter glows but does not light, replacing the igniter can solve these issues. For this installation, you will need a Phillips screwdriver and needle nose pliers. First place the grate on top of the burner, then lift the burner and disconnect the wires. Next remove the two Phillips screws from the bottom of burner, pull igniter out of the burner and wiggle in the new one. Refer to the installation instructions provided by the manufacturer for more instructions.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
roy from East Providence, RI
gas burner ignitor failure
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt had built up around burner to pan connection.I used my oil filter wrench to turn slightly the burner to remove it from the pan to clean.Reassembled in reverse order.
Read more...
Your Price
$56.38
In Stock
Amana Range Igniter Horizontal Mount
PartSelect Number PS11744545
Manufacturer Part Number WP7432P136-60
This can be used for either the bake igniter or broil igniter in your appliance. NOTE: The part may differ in appearance but will function the same as the original.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
- See more...
Installation Instructions
Robert from plymouth, NH
The broiler would work but the stove would not lite. I saw the igniter getting to a glow on the broiler and lite but the stove it would not so I figured the igniter might be shot.
1st I opened door to stove and removed the wire racks. Then removed lower panel to get to igniter. Then I had to slide stove away from wall. Remove panel on back for accesss to wires. The new part had a plastic connector and the original just used wire nuts for the connection. So I cut off connector and stripped 1/2 inch of the end. Removed wire nuts from old igniter. Back into the oven removed 2 screws pulled out old igniter. Installed new igniter with 2 screws stuck wires through small hole to rear. Back around to back of stove. Connected wires with wire nuts.(I did not see any differnce in wires and dont think it matters) put everything back together and fires that baby up. I am gonna say 15-30 min job
Read more...
Your Price
$54.00
In Stock
Amana Range Flat Style Oven Igniter
PartSelect Number PS387058
Manufacturer Part Number 786324
The flat style oven igniter is also known as a range oven igniter. The function of this part is to glow extremely hot in order to ignite the gas for the oven burner. With this flat style oven igniter, you must reuse the original bracket from your original igniter. Be very careful during installation to not touch the black element part of the flat style oven igniter as it is very fragile. If your oven does not heat you should check to see if your igniter is glowing. If your igniter is glowing and the oven is not heating there is a chance that the igniter is not strong enough to heat your oven and it will need to be replaced.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking
- See more...
Installation Instructions
John from Niles, MI
Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them from the front. I was surprised to find plastic lugs covering the wire ends, rather than ceramic. I attached the new ignitor wires and reused the plastic lugs, as no ceramic ones came with the new ignitor. I carefully slid the new ignitor back into the cage/shield attached to the manifold and replaced the manifold. I then turned the gas back on and tested the ignitor (which worked perfectly) before replacing the oven plate. The repair took less than 30 minutes, but my wife and I thoroughly cleaned the door and interior while we had it apart. The hardest part was getting the door back on the hinges, but this too was accomplished after several attempts. The oven heats up beautifully now.
Read more...
Your Price
$41.95
In Stock
Amana Range Surface Igniter
PartSelect Number PS11755874
Manufacturer Part Number WPW10515459
Discover the genuine OEM Surface Ignitor, specifically designed for optimal performance with certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. While seemingly identical to other parts, the unique size and shape of this surface burner spark electrode set it apart. Ideal for ranges, this surface burner ignitor does a crucial job, producing the spark that lights your surface burner. It?s critical to ensure safety by unplugging the range and shutting off the gas supply before installing this part. Wearing work gloves will protect your hands during installation. Rest assured that this product is manufactured by Whirlpool, one of the most reputable names in the industry.
Your Price
$53.41
In Stock
Amana Range Oven Igniter
PartSelect Number PS16744629
Manufacturer Part Number W11590294
Discover a fantastic solution to your oven repair needs with our Whirlpool IGNTR-OVEN Igniter. This hot surface igniter is a reliable choice for ensuring optimal functionality of your oven. Trusted by professionals, the Whirlpool IGNTR-OVEN Igniter offers enduring performance and quality. Designed with precision and known for its durability, this igniter is your go-to solution when your Whirlpool oven isn't heating efficiently. So, invest in the Whirlpool IGNTR-OVEN Igniter and experience a hassle-free cooking experience with your Whirlpool oven.
Installation Instructions
William from KRONENWETTER, WI
Igniter was not getting hot enough.r
Take off back plate on stove unplugged igniter wire take nut drive remove old igniter run new wire through hole plug in replace back go inside stove and install new igniter.
Read more...
Your Price
$45.10
In Stock
Amana Range Spark Ignition Electrode
PartSelect Number PS11757464
Manufacturer Part Number WPY0316773
This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition electrode reaches a certain temperature, it creates a spark. This electrode comes with the mounting bracket you will need to successfully install the part. Before installing your new part, shut off the gas supply and unplug your appliance. This part cannot be repaired. If it is damaged or faulty, it must be replaced.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
HUY from ALISO VIEJO, CA
Broken Electrode, no spark
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
Read more...
Related Amana Range Parts
- All Amana Range parts
- Amana Range Brackets and Flanges
- Amana Range Caps and Lids
- Amana Range Circuit Boards and Touch Pads
- Amana Range Cooktops
- Amana Range Doors
- Amana Range Drawers and Glides
- Amana Range Drip Bowls
- Amana Range Elements and Burners
- Amana Range Fuses
- Amana Range Grates
- Amana Range Handles
- Amana Range Hardware
- Amana Range Hinges
- Amana Range Hoses and Tubes
- Amana Range Insulations
- Amana Range Knobs
- Amana Range Latches
- Amana Range Lights and Bulbs
- Amana Range Panels
- Amana Range Power Cords
- Amana Range Racks
- Amana Range Seals and Gaskets
- Amana Range Switches
- Amana Range Thermostats
- Amana Range Trims
- Amana Range Valves
- Amana Range Wire Plugs and Connectors