Whirlpool Dryer Legs and Feet

Videos!

Your Price

$7.29

Whirlpool Dryer Washer Leveling Foot

★★★★★

13 Reviews

PartSelect Number PS1609293

Manufacturer Part Number 49621

If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Keep the washer as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This replacement part is sold individually.

Fixes these symptoms

Noisy
See more...

Installation Instructions

Bryan from west valley city, UT

dryer had no heat, all other functions worked

After replacing the heat element as a guess, (which did not fix it), I measured voltage with a DVOM, found lower cut off switch in op, And thanx to some tips on parts select I ordered the the Thermal cut off kit, fast shipping, installed very easily and all is working properly Read more...

Videos!

Your Price

$6.95

Whirlpool Dryer Washer Front Leveling Foot

★★★★★

5 Reviews

PartSelect Number PS11747965

Manufacturer Part Number WPW10001130

The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause it to vibrate and/or shake during the cycle. The function of the adjustable foot is to keep your washing machine supported and to make sure that it is level at all times. The tools you will need for this repair include a pair of channel lock pliers, and a 9/16 wrench.

Fixes these symptoms

Shaking and Moving
See more...

Installation Instructions

Paddy from Ferndale, WA

Bearings went out in the drum.

purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...

Videos!

Your Price

$6.95

Whirlpool Dryer Rubber Leveling Leg Foot Pad

★★★★★

1 Review

PartSelect Number PS11757547

Manufacturer Part Number WPY314137

This gray levelling leg foot pad is made of rubber and is just over an inch in diameter. Sold individually.

Fixes these symptoms

Noisy
See more...

Installation Instructions

Richard from JAX BCH, FL

Dryer Will Not Heat!

The Heater Installation Went Well, I Watch The Video & It Was Very Helpful Instructions.
Great Job On Your Side With The Video, Thanks Again! Read more...

Videos!

Your Price

$27.95

Whirlpool Dryer Levelling Foot

★★★★★

1 Review

PartSelect Number PS11770254

Manufacturer Part Number W11025920

Introducing the Whirlpool Leveling Feet, a genuine OEM part designed for optimal function and compatibility with select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef clothes dryers. This pack of four leveling legs provides sturdy support and ensures the stability of your dryer by facilitating height adjustments. Maintain the balance of your dryer conveniently with this kit, specially designed to mitigate floor irregularities. Prior to installing this part, disconnect the power and consider wearing work gloves for hand protection. The precision design promises a flawless fit and easy installation. Enhance the efficiency of your dryer with our Whirlpool Leveling Feet.

Videos!

Your Price

$24.95

Whirlpool Dryer Leveling Leg

PartSelect Number PS12726566

Manufacturer Part Number WE01X29357

Your Price

$26.95

Whirlpool Dryer Leveling Feet

PartSelect Number PS12749516

Manufacturer Part Number W11444912

Introduce the ideal addition for your home appliance repair needs with the FEET-LVLNG Dryer leveling leg set of 4 from Whirlpool. As a genuine OEM part, these leveling legs are tailored to work for select models from brands like Whirlpool, KitchenAid, Maytag, Jenna-Air, Amana, Inglis, and Magic Chef. This set adds significant stability to your dryer by providing optimal support and easy modifications for the height of your dryer. It is advised to disconnect power supply before installation to ensure safety and we recommend wearing work gloves during fitting. So, ensure your dryer is operating at its most efficient level and maintain its stability with this premium set of leveling legs.

Your Price

$16.95

Whirlpool Dryer Leveling Foot & Nut

PartSelect Number PS11746502

Manufacturer Part Number WP8563585

This individual levelling foot is compatible with different types of standing home appliances and is a genuine OEM part. Made of high-quality metal and featuring a metal securing nut, this levelling foot is made of plastic and is used to level the pedestal for your appliance. Over time and through gradual wear and tear of moving your appliance around or through excessive movement and impact, a levelling leg will crack and break, and eventually destabilize itself. If you find your appliance is imbalanced or vibrates excessively when in use, this levelling foot may need to be replaced. Since most appliances take one foot on each corner, 4 corners being 4 feet, it is important to consider the amount of feet you require when ordering. This levelling foot is adjustable, since it comes with the securing nut, adding longevity to the levelling foot and your appliance. To replace this foot, simply lift the corner of the pedestal from the floor, unscrew and remove the previous foot, and install the new foot, adjusting its height with the nut.

Installation Instructions

Linda from Arcadia, IN

missing parts on used washer and dryer pedstals

screwed on

hard to find parts - order on Thurs evening and got Sat - made problem really easy Read more...