Whirlpool Dryer Hinges
Popular Whirlpool Dryer Hinges
Whirlpool Dryer Hinge
PartSelect Number PS11750410
Manufacturer Part Number WPW10208415
This is a door hinge, which allows for your washer door to properly shut during the washing cycle, and open after it is finished. If your door hinge is bent or broken and not allowing the door to shut properly, this hinge needs to be replaced immediately. Replacing this hinge will require a screwdriver to remove and install. This door hinge is an OEM part made of durable metal, and does not come with any other parts, like the necessary securing screws or install bracket.
Fixes these symptoms
- Door Sags
- Door won’t close
- Lid or door won’t close
- See more...
Installation Instructions
Sandy from MILWAUKIE, OR
One of the hinges broke, making the door sag
Using the Torx Screwdriver, we removed the door from the unit. Then we removed all of the screws on the inside of the washer door. After that we flipped it over and opened it up exposing the inside. We couldn't separate them entirely because there was a screw under the latch piece that we couldn't figure out how to get to. However with all the screws out on the inside of the door, we did have enough room to open it up and access the place cover that holds the hinges in. Once we accessed that we removed the roller tips from the old unit and placed them on the new one. Then we reversed the process. With a couple screws in we realized we had put the hinge in reversed from what it needed to be, so we reopened it and switched it around. Then completed replacing all the screws and reattached it to the washer. It opens and closes perfectly and we saved a couple hundred dollars for sure, as the quote to come out had been a $150 trip charge.
Read more...
Whirlpool Dryer HINGE
PartSelect Number PS11775346
Manufacturer Part Number W11051465
Fixes these symptoms
- Door Sags
- Door won’t close
- See more...
Your Price
$132.28
In Stock
Whirlpool Dryer Door Hinge
PartSelect Number PS11752542
Manufacturer Part Number WPW10310366
This door hinge is used to hold your door on your dryer in place. Most dryers require two and they are sold individually.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Jennifer from Davenport, IA
Door would not stay shut
Simply took door off, four screws. Laid on table top and removed several other screws to get to the inside. Removed latch and replaced. Replaced srews and put door back on. I'm sure I saved us a bunch on a service call. Oh did I mention I'm a mom with a 2 and a 4 year old running around while I did this repair. Back in business now.
Read more...
Whirlpool Dryer Lid Hinge Bearing
PartSelect Number PS11738874
Manufacturer Part Number WP21258
This is the bearing for the lid hinge. Sold individually.
Fixes these symptoms
- Lid or door won’t close
- See more...
Installation Instructions
Enrique from Miami Shores, FL
spin cycle did not activate
Replaced hinge switch. Still no spin cycle. Noticed hinge bearing cracked & if hinge forced into switch, spin activated. Ordered new hinge bearings.Spin cycle still didn't engage. On further examination, observed that hinge was bent. Straightened hinge & worked like a charm. Didn't really need new switch or bearings. NOTE : Avoid having washer door bang shut.Took longer than expected, but each procedure was simple.
Read more...
Your Price
$8.13
In Stock
Whirlpool Dryer Door Hinge
PartSelect Number PS8756812
Manufacturer Part Number WE1M1033
Screws NOT included.
Fixes these symptoms
- Door won’t close
- See more...
Your Price
$10.89
In Stock
Whirlpool Dryer Door Hinge
PartSelect Number PS11753739
Manufacturer Part Number WPW10362431
Sold individually.
Fixes these symptoms
- Door won’t close
- See more...
Whirlpool Dryer Door Hinge - Right Side
PartSelect Number PS11741412
Manufacturer Part Number WP3387560
Right Side
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Patricia from GLENDALE, AZ
Dryer door won'y close/ hinge's bent
Well my husband did it for me, but very easy to fix, unscrew the bolts, take the door off, take off both hinge's which is attached to springs and replace, put it all back together, door fixed and closes nicely.
Read more...
Whirlpool Dryer Door Hinge - Left Side
PartSelect Number PS11741411
Manufacturer Part Number WP3387559
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Donna from S SAN FRAN, CA
Left hand door hinge broken.
Snapped the bottom front panel off by using a flat tip screwdriver on the clips holding the panel on. Then I had access to the spring which I pulled off the bottom mount with my pliers. Pulled the door open to unscrew the left side hinge and then replaced with the new one and pulled the spring back up on the top hinge and bottom mount. Then I snapped the bottom panel back on.
Read more...
Whirlpool Dryer Hinge - Right Side
PartSelect Number PS11744879
Manufacturer Part Number WP8066056
This part attaches the door to the front panel of your dryer.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Thomas from Fredericksburg, VA
Door Hinge Failure Right Side
Unplug dryer, remove two screws in lint screen door, using a pry bar or stiff putty knife, gently pry up on both front corners to release the clips holding the top down. Use a 5/16" nut driveer two remove the two screws inside at the top of the front of the dryer, remove the two wires on the door switch. Open door enough to get your hand in to support the drum, now lean the front out at the top and let the drum rest. Grasping the front at the top on both sides gently lift up to release the clips securing the bottom front. Release the door springs,open door and replace the hinges. Reverse to reassemble.
Read more...
Whirlpool Dryer Hinge - Left Side
PartSelect Number PS11744880
Manufacturer Part Number WP8066057
Left Side.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Thomas from Fredericksburg, VA
Door Hinge Failure Right Side
Unplug dryer, remove two screws in lint screen door, using a pry bar or stiff putty knife, gently pry up on both front corners to release the clips holding the top down. Use a 5/16" nut driveer two remove the two screws inside at the top of the front of the dryer, remove the two wires on the door switch. Open door enough to get your hand in to support the drum, now lean the front out at the top and let the drum rest. Grasping the front at the top on both sides gently lift up to release the clips securing the bottom front. Release the door springs,open door and replace the hinges. Reverse to reassemble.
Read more...
Related Whirlpool Dryer Parts
- All Whirlpool Dryer parts
- Whirlpool Dryer Belts
- Whirlpool Dryer Brackets and Flanges
- Whirlpool Dryer Caps and Lids
- Whirlpool Dryer Circuit Boards and Touch Pads
- Whirlpool Dryer Doors
- Whirlpool Dryer Drums and Tubs
- Whirlpool Dryer Ducts and Vents
- Whirlpool Dryer Elements and Burners
- Whirlpool Dryer Filters
- Whirlpool Dryer Fuses
- Whirlpool Dryer Handles
- Whirlpool Dryer Handles and Latches
- Whirlpool Dryer Hardware
- Whirlpool Dryer Hoses and Tubes
- Whirlpool Dryer Knobs
- Whirlpool Dryer Latches
- Whirlpool Dryer Lights and Bulbs
- Whirlpool Dryer Panels
- Whirlpool Dryer Pulleys
- Whirlpool Dryer Seals and Gaskets
- Whirlpool Dryer Sensors
- Whirlpool Dryer Springs and Shock Absorbers
- Whirlpool Dryer Switches
- Whirlpool Dryer Thermostats
- Whirlpool Dryer Timers
- Whirlpool Dryer Trims
- Whirlpool Dryer Valves
- Whirlpool Dryer Wheels and Rollers
- Whirlpool Dryer Wire Plugs and Connectors