Back
Back
Keep typing for more specific results...

KitchenAid Dishwasher Brackets and Flanges

Popular KitchenAid Dishwasher Brackets and Flanges

Your Price
$14.65
  In Stock
KitchenAid Dishwasher Mounting Bracket
★★★★★
★★★★★
14 Reviews
PartSelect Number PS11745496
Manufacturer Part Number WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Installation Instructions
Judith from Essex, MA
Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief! Read more...
Your Price
$27.26
  In Stock
KitchenAid Dishwasher Side Mounting Bracket Kit
★★★★★
★★★★★
7 Reviews
PartSelect Number PS1487167
Manufacturer Part Number 8212560
This mounting kit can be used on solid surface countertops.
Fixes these symptoms
Your Price
$26.95
  In Stock
KitchenAid Dishwasher Brace
PartSelect Number PS11765163
Manufacturer Part Number W10850371
Introducing the Whirlpool Dishwasher Door Brace, a genuine Whirlpool part designed to notably enhance the performance of your dishwasher. This durable brace, specially engineered to replace the flat panel vapor barrier, has been crafted with a rod to keep the hinges straight, ensuring better alignment and longevity of your dishwasher door. This component assists in reinforcing the rear of your dishwasher tub, adding to the overall structural integrity. Designed for easy installation, you'll want to disconnect power and shut off the water supply before beginning to ensure a safe process. It's recommended to verify the correct part for your enterprise model before acquisition. Turn to Whirlpool's trusted reliability for this exceptional dishwasher door brace to keep your unit running smoothly.
Fixes these symptoms
Installation Instructions
michael from TUCSON, AZ
dishwasher leaking from door
it was ok if I would have been sent the correct part, but you sent me the wrong part # and I had to go to the post office and mail it back. the part was not the same number as my order and completely wrong, still waiting for my refund and shipping charges. So you have failed me. Read more...
Your Price
$21.95
  In Stock
KitchenAid Dishwasher Bracket
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11727941
Manufacturer Part Number W10837623
Introducing the genuine OEM Support Bracket from Whirlpool, designed exclusively for securing the water supply tube in your dishwasher. Crafted to offer exceptional performance, this accessory is compatible with specific models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. To confirm its compatibility, cross-check this bracket with the model of your appliance before ordering. Remember to safely unplug your dishwasher and shut off the water supply before installation. For best results and to avoid potential injury, always wear work gloves during installation. Restore the efficiency of your dishwasher with this superior Whirlpool Support Bracket.
Fixes these symptoms
Your Price
$13.95
  In Stock
KitchenAid Dishwasher Spray Arm Tube Hanger
★★★★★
★★★★★
1 Review
PartSelect Number PS11745439
Manufacturer Part Number WP8268349
Fixes these symptoms
Installation Instructions
Gifford from Holyoke, MA
BOM bracket broken at bottom of alignment hole.
Remove old bracket by prying off clips on rack wires. Squeeze bracket at clips and let it drop.
Under rack, align tube thru new bracket hole. Light squeeze top of new bkt.to clear wire rack. Come straight up aligning squeezed ends thru wire rack. One side at a time, keeping clips above seating area, install one side at a time with light pressure.
Read more...
Your Price
$25.95
  In Stock
KitchenAid Dishwasher Dispenser Mounting Bracket
PartSelect Number PS11755103
Manufacturer Part Number WPW10462232
Fixes these symptoms
Your Price
$14.95
  In Stock
KitchenAid Dishwasher Mount
PartSelect Number PS16620368
Manufacturer Part Number W11551395
Your Price
$25.95
  In Stock
KitchenAid Dishwasher Rack Tub Mount
PartSelect Number PS16660605
Manufacturer Part Number W11579562
Your Price
$9.95
  In Stock
KitchenAid Dishwasher Mounting Bracket
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11747051
Manufacturer Part Number WP9741251
This metallic mounting bracket comes with a screw for easy mounting.
Installation Instructions
DAVID from MAPLE GROVE, MN
Dishwasher would only partially fill with water.
First turn off the power and water. Water valve is under the sink. I removed the two lower panels with 5/16 nut driver. I disconnected the valve from the cross member, again with a 5/16 socket. I removed that cross member with the same nut driver. I disconnected the rubber hose using pliers. I unplugged the electrical connector from the valve body. I held the water inlet pipe with a wrench and twisted the valve off with the adjustable pliers. I applied teflon tape to the water inlet pipe and reassembled. Works like new.

For the rubber water tube I pulled off the old tube, put some dish soap on the new tube and it slid right on.
Read more...
Your Price
$14.95
  In Stock
KitchenAid Dishwasher Mount
PartSelect Number PS16660543
Manufacturer Part Number W11569162

Related KitchenAid Dishwasher Parts