Jenn-Air Cooktop Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Jenn-Air Cooktop Switches
Your Price
$67.08
In Stock
Jenn-Air Cooktop Infinite Switch
PartSelect Number PS12114485
Manufacturer Part Number W11129442
This surface burner switch is a genuine replacement component designed to regulate the heat output of the left front burner on select electric ranges. It functions by cycling electrical power to the burner, maintaining the desired temperature throughout cooking. A faulty switch may result in overheating, lack of heat, or the burner remaining at a single temperature setting. Replacing this part restores precise temperature control and ensures safe, consistent operation. Installation should be performed with the appliance disconnected from power, and may require basic tools and reference to model-specific instructions.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Shannon from Orlando, FL
Front 3 setting burner was not heating properly; switched to high without adjustment
Looked up the part in the online manual, watched a YouTube video, removed upper back of range, swapped out part. Saved $200!!
Read more...
Your Price
$149.33
In Stock
Jenn-Air Cooktop Burner Switch - Right Front
PartSelect Number PS11731368
Manufacturer Part Number W10857622
This dual surface element control switch is a genuine OEM replacement part designed to fit select models of stoves, ovens, and ranges. The control switch is an essential component that allows you to turn the surface element on and off, as well as regulate the amount of heat the element produces. If your stove’s surface element isn’t heating properly, fluctuates in temperature, or won’t turn off, replacing the control switch can restore full functionality. Before installation, ensure the range is unplugged, or disconnect the power at the house circuit breaker to avoid electrical hazards. The surface element control switch is usually located behind the stove’s front control panel. To install, remove the panel and disconnect the old switch from the wiring harness. Install the new switch by securing it in place and reconnecting the wiring to match the original configuration. After installation, turn the power back on and test the surface element to verify it operates correctly.
Fixes these symptoms
- Element will not heat
- See more...
Your Price
$34.85
In Stock
Jenn-Air Cooktop Range Infinite Burner Switch - 8 Inch
PartSelect Number PS11744487
Manufacturer Part Number WP7403P239-60
This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Installation Instructions
Dennis from Hagerstown, MD
The Burner was getting too hot and you could not regular the tempature
Moved the Appliance out unplugged it and removed the backing plate then Remove the Knob and unscrew the infinite switch then marking the 5 wires to know where the go on the new switch, removing and replaced it with the new one
Read more...
Your Price
$70.45
In Stock
Jenn-Air Cooktop Surface Burner Switch - 240v
2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the housing enough to get at the old switch and carefully pulled it loose--it was a front burner so the control switch was about as far back as it could be but still wasn't that hard to get at.
4. Turned the new switch to orient the wire connectors, then, using a needle-nose pliers, removed each friction connector, one at a time, and fitted them on the new switch (note: one of the wires fitted best if it went under as opposed to around the base of the new switch).
5. Replaced the control back through the housing and screwed it in place, making sure the orientation of the control matched the way it looked originally.
6. Slide the housing back over the two screws and tightened, replace vent.
7. Replaced the knob and turned on the power.
(The above took me about twice as long to write as it did to make the repair and I write professionally but am not a professional electrician.)
Also, I bought a second control switch because, given the age of the unit, I'm sure another one will go. The second one will assure that it won't happen :-). Read more...
PartSelect Number PS12347301
Manufacturer Part Number W11120791
This surface burner switch, also known as an infinite switch, controls and regulates the heat output of the burners on a stovetop. The user simply adjusts the knob on the user interface panel, which in turn controls this switch. Made for various ranges, wall ovens and cooktops, this is a genuine OEM part that comes by itself, without any hardware like screws or nuts. This burner switch is an electrical component that you also handle directly, so it can become faulty leading to problems like your stovetop not heating enough, overheating or staying at a fixed heat. This burner switch is a vital component for your stovetop and if it presents any of those issues, it needs to be replaced immediately. A screwdriver, set of pliers and wiring diagram will be needed for the replacement and installation process, and you will need to remove your appliance from the wall outlet first. Remove the knobs from the control panel and then gain access to the underneath portion of it with your screwdriver and disconnect the switch. Remove the wires from the burner switch with a set of pliers and disconnect the securing screws holding the switch in place. Now, you can install the new switch and reassemble the panel, being mindful of wiring each connector to the appropriate wire.
Fixes these symptoms
- Element will not heat
- Oven is too hot
- Will Not Start
- See more...
Installation Instructions
James H from Oxford, NY
Burner had one temperature--hot, regardless of setting
1. Killed power and removed the regulator's knob, noted the position of the old control.2. Took off the cover for the center vent and loosened the two screw holding the housing in place--the screws didn't have to come out completely as it is a U-shaped friction hold.
3. Unscrewed the two screws holding the old control switch in place--lifted the housing enough to get at the old switch and carefully pulled it loose--it was a front burner so the control switch was about as far back as it could be but still wasn't that hard to get at.
4. Turned the new switch to orient the wire connectors, then, using a needle-nose pliers, removed each friction connector, one at a time, and fitted them on the new switch (note: one of the wires fitted best if it went under as opposed to around the base of the new switch).
5. Replaced the control back through the housing and screwed it in place, making sure the orientation of the control matched the way it looked originally.
6. Slide the housing back over the two screws and tightened, replace vent.
7. Replaced the knob and turned on the power.
(The above took me about twice as long to write as it did to make the repair and I write professionally but am not a professional electrician.)
Also, I bought a second control switch because, given the age of the unit, I'm sure another one will go. The second one will assure that it won't happen :-). Read more...
Your Price
$66.28
In Stock
Jenn-Air Cooktop Infinite Switch
PartSelect Number PS12347302
Manufacturer Part Number W11120795
The surface element control switch is an essential component in electric ranges, responsible for regulating the heat output of the surface burner. It allows you to adjust the temperature levels by controlling the electrical flow to the burner. If your stovetop burner fails to turn on, stays on high heat, or doesn’t respond to adjustments, a faulty switch could be the cause. This switch features a double flat shaft design and is nut-mounted for secure installation. Always disconnect the power supply before replacing the switch to prevent electrical hazards. Ensure compatibility with your appliance model before purchasing.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Malcolm from White House, TN
Burner Switch Broke were Knob attached
First I cut off power supply, removed screws that held panel on, pulled the switch up and disconnected wires. Installed new switch, being sure to connect wires in the correct places. Refastened panel to stove top. Turned power back on and tested switch and it Worked.
Read more...
Your Price
$69.06
In Stock
Jenn-Air Cooktop Surface Element Switch
PartSelect Number PS11770037
Manufacturer Part Number W10917724
Introducing Whirlpool's Surface Element Switch! This genuine OEM part has been designed for superb functionality with Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models of stoves, ovens, and ranges. A versatile component, it can be used for your right front or left rear surface element control. Not only is it responsible for turning your surface element on and off, it effortlessly controls the amount of heat your element produces for precision cooking. Prioritize safety by unplugging your range or shutting off your house circuit breaker for the range before installation. With this switch, boost the performance and longevity of your kitchen appliance!
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Albert from VALLEY MILLS, TX
Switch to the left front burner not working right.
Repair has not been made yet still waiting for the part. The part is on order and was told it would be shipped in 1/3 business days. Still waiting for the part to come from China. This is the problem with parts being made out side the U. S. A.
Read more...
Your Price
$77.69
In Stock
Jenn-Air Cooktop Surface Burner Switch
PartSelect Number PS12070671
Manufacturer Part Number W11088181
This is the replacement surface burner switch for your range. It measures approximately 1.5 inches by 1.5 inches, with a shaft that is approximately 1 inch long. The surface burner switch turns the surface element on and off and allows you to control how much heat the element produces. The main reason to change the infinite switch is if the switch has shorted out inside, and is not allowing power to the burner, or if the contacts inside are stuck together and the element is stuck on high. Ensure that the burner is off, and the range has been disconnected from the power source before you begin this repair. This part is sold individually and is an OEM part.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Larry from Hampton Cove, AL
old switch had shorted and burned out
This was a range top. i removed the 12 hex machine scews holding on the top, then removed the two star screws holding the old switch. there were fore wire that had fitted on tabs. Hooked them to the new swtch and reassembeld. Easy repair since i could lift the unit out without disconnecting main cables. Replacement range would have been oveer $1000. Psrt was under $40 and delivered in a matter of days.
Read more...
Your Price
$86.36
In Stock
Jenn-Air Cooktop Surface Unit Infinite Switch Kit
PartSelect Number PS2076107
Manufacturer Part Number 700855K
This is a push-and-turn switch. This kit includes all necessary hardware to install the part. Switch comes with a D-shaped shaft.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Michael from Eden, VT
Regular Parts Replacement/Maintenance.
We love our Jenn-Air electric range that we have owned since 1983 and couldn't get parts from where we bought it recently. We called around to Sears and other appliance dealers and they couldn't help us. We found your company searching on the internet and we are very much pleased with your parts listing and your great service. We will be back. Jody and Mike Hayden, Eden, Vt.
Read more...
Your Price
$53.86
In Stock
Jenn-Air Cooktop Dual Surface Burner Switch Kit
The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (terminal 2) to the new switch terminal P1. Also attach the jumper cable to P1 and "jump" it to S1.
Attach the orange wire (old switch terminal 5) to S2
Attach the yellow wire (old switch terminal 4) to 4a
Attach the tan/(white?) wire (old switch terminal 3) to terminal 4 on the new switch
Attach the single red wire from the right front element to terminal 2 on the new switch.
Attach the 'compound' red wires (the ones that come from the left rear/outlet connection and is also attached to the right rear switch) to terminal P2 on the new switch.
There is no need to seperate the compound red wires as the instructions might lead you to believe.
Good Luck Read more...
PartSelect Number PS2003583
Manufacturer Part Number 12002125
This switch is used to operate the dual surface burner.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Michael from Collierville, TN
Outer element of dual element burner didn't work
Remove Ceran Galss top by removing hex screws below the rim. Also remove the two opposing screws in the center of the downdraft opening. Ceran top comes off easily now.The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (terminal 2) to the new switch terminal P1. Also attach the jumper cable to P1 and "jump" it to S1.
Attach the orange wire (old switch terminal 5) to S2
Attach the yellow wire (old switch terminal 4) to 4a
Attach the tan/(white?) wire (old switch terminal 3) to terminal 4 on the new switch
Attach the single red wire from the right front element to terminal 2 on the new switch.
Attach the 'compound' red wires (the ones that come from the left rear/outlet connection and is also attached to the right rear switch) to terminal P2 on the new switch.
There is no need to seperate the compound red wires as the instructions might lead you to believe.
Good Luck Read more...
Your Price
$41.83
In Stock
Jenn-Air Cooktop Infinite Switch - 6 Inch
Ordered parts, they shipped same day. Arrived exactly as predicted. Totally non-stress. Can't find a thing to complain about.
Thanks PartSelect Read more...
PartSelect Number PS11744486
Manufacturer Part Number WP7403P238-60
The Infinite switch 6-inch surface element control from Whirlpool is the perfect solution for seamless control of your cooking range. Made from high-quality materials, this genuine OEM part ensures optimum performance and longevity. Designed specifically for ranges, this surface element control provides you with precise control over the heat produced by the surface element. It's crucial to unplug your appliance or switch off the house circuit breaker before installing this part. Always remember to safeguard your hands with protective gloves during the installation. Trust in Whirlpool's dedication to quality and enhance your range's functionality with this surface element control switch.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Robert from Santa Fe, NM
installed new switches and elements
just move one wire at a time. Each switch has 5 wires and I am sure mixing them would not be good.Ordered parts, they shipped same day. Arrived exactly as predicted. Totally non-stress. Can't find a thing to complain about.
Thanks PartSelect Read more...
Related Jenn-Air Cooktop Parts
- All Jenn-Air Cooktop parts
- Jenn-Air Cooktop Brackets and Flanges
- Jenn-Air Cooktop Caps and Lids
- Jenn-Air Cooktop Circuit Boards and Touch Pads
- Jenn-Air Cooktop Cooktops
- Jenn-Air Cooktop Drip Bowls
- Jenn-Air Cooktop Elements and Burners
- Jenn-Air Cooktop Fuses
- Jenn-Air Cooktop Grates
- Jenn-Air Cooktop Hardware
- Jenn-Air Cooktop Igniters
- Jenn-Air Cooktop Ignitions
- Jenn-Air Cooktop Knobs
- Jenn-Air Cooktop Lights and Bulbs
- Jenn-Air Cooktop Seals and Gaskets
- Jenn-Air Cooktop Trims
- Jenn-Air Cooktop Valves
- Jenn-Air Cooktop Wire Plugs and Connectors