General Electric Microwave Hardware

Your Price

$13.95

General Electric Microwave Range Screw

★★★★★

2 Reviews

PartSelect Number PS222157

Manufacturer Part Number WB01T10008

This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.

Your Price

$13.95

General Electric Microwave Holder Rack

★★★★★

2 Reviews

PartSelect Number PS11762229

Manufacturer Part Number WB02X27051

Your Price

$114.19

General Electric Microwave Tcomgtscrew Kit

★★★★★

1 Review

PartSelect Number PS16873593

Manufacturer Part Number WB49X45009

Enhance the lifespan and performance of your GE appliance with our top-quality TCO+MGT+Screw kit. This superior kit is expertly designed by GE, ensuring perfect compatibility and seamless performance with your appliance. The kit is instrumental in assisting the thermal cutoff (TCO) and magnetron (MGT), fundamental components of your GE appliance. Easy to install, each Screw kit is meticulously constructed for durability and longevity. Opt for this premium GE TCO+MGT+Screw kit and elevate the efficiency of your appliance. Harness the full potential of your GE device with this exceptional accessory.

Your Price

$13.95

General Electric Microwave Plastic Rivet

★★★★★

1 Review

PartSelect Number PS222397

Manufacturer Part Number WB01X10055

This part is the replacement plastic rivet, or stirrer fan cover clip for your microwave. It is made of white plastic and is approximately ¼ inch in diameter, and ½ inch long. The plastic rivet holds the fan cover to the inside of the microwave. The main reason to replace the rivet, is if your current rivet is broken or missing, and the fan cover will not stay in place. This is an OEM part sourced directly from the manufacturer.

Installation Instructions

Steven from UTICA, NY

cover stirrer fan was burned and sparking in three part even the plastic rivet

just in 1 2 3 step easy way. First unplug the power cord,use a small flat-head screwdriver to pull out the plastic rivet pin,rotate the old cover counter clockwise to removed lift out the blade assembly, install the new cover stirrer fan by first positioning the blade assembly then align the cover and rotate it clockwise to secure, then replace the mounting plastic rivet pin;with the repair completed, plug the power cord back in and your microwave oven should be ready for use again. : ) Read more...

Your Price

$13.95

General Electric Microwave Screw

★★★★★

2 Reviews

PartSelect Number PS234427

Manufacturer Part Number WB1X1130

Sold Individually.

Installation Instructions

George from MILWAUKIE, OR

GE WB44T10086 Range Convection Element AP4358533 PS2321875 interrupted

after you disconnect the direct breakers and open the oven:
1. remove the first 4 screws and the fan's cover
2. remove the short screws from element convection assembly
3. gently pool both wires and disconnect the old element (two terminals)
4. carefully insert the terminals in the new element.
5. re-screw the short 4 screws (better to buy new ones with the assembly) They are available but sold separated.
6. fix back the fan cover,
re-connect the breakers and that's it! Read more...

Your Price

$15.95

General Electric Microwave Screw

PartSelect Number PS234785

Manufacturer Part Number WB1X536

Your Price

$13.77

General Electric Microwave Screwtapping

★★★★★

1 Review

PartSelect Number PS3517555

Manufacturer Part Number 1TTL0402818

Your Price

$13.95

General Electric Microwave Screw

★★★★★

1 Review

PartSelect Number PS271689

Manufacturer Part Number WH2X930

This screw is sold individually.

Installation Instructions

Mikhail from Framingham, MA

8 screws and done

After taking off:
5 screws off the back
2 in the front - Husky screws in the front
panel clips - the top panel was opened.

1 more screw for starter switch

DONE - under 15 minutes. Read more...