Popular Washer Filters

Your Price
$11.52
  In Stock
Washer Charcoal Filter
★★★★★
★★★★★
31 Reviews
PartSelect Number PS1871363
Manufacturer Part Number 8206230A
This Charcoal Filter traps grease from your oven's exhaust to help prevent it from entering the vent, which could cause damage over time. If the exhaust fan on your microwave is not working, you may need to replace your charcoal filter. This charcoal filter is located within the intake grille of your microwave, which will need to be unscrewed and opened to gain access to the filter. The manufacturer recommends that you change your charcoal filter every six months. This filter measures 5 inches by 5.375 inches by 0.375 inches. Be sure to measure your current filter to assure correct replacement. This product is sold individually. We recommend the use of gloves during installation to protect your hands from messy grease during your repair. You should also unplug your appliance at the electrical outlet or switch it off at the breaker. Using a Phillips screwdriver, unthread the screws securing the grill. Open the door and slide the grill to the left and lift it up to remove it. This will allow access to the filter so it can be either replaced or cleaned. Remember to insert the tabs of the grill into the frame and slide it to the right when you are done. To finish, shut the oven door and secure the grill with the screws.
Fixes these symptoms
Installation Instructions
Richard from San Antonio, TX
Mounting brackets are fragile and plastic support is easily broken
Replaced the intake grille. The grille should be removed prior to cleaning. The entire part is plastic and easily broken so that the two tabs for the mounting screws are shattered and will not hold the part in place. If one attempts to clean the grille using only a moderate amount of pressure with a cloth the fragile plastic will break. The part is poorly designed. When the vent is removed to replace the charcoal filter, one may discover that the grille has already been broken in a previous cleaning operation. Read more...
Your Price
$50.03
  In Stock
Washer Dryer Lint Filter
★★★★★
★★★★★
63 Reviews
PartSelect Number PS3527578
Manufacturer Part Number 5231EL1003B
The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice that your dryer is not providing enough heat, or if it takes too long to dry, you may need to replace the lint filter. You should also replace the lint filter if you notice it is damaged during regular maintenance. Many of our customers have rated this repair as easy. To complete the repair, simply remove the old lint filter and replace it with the new one. You may want to use a flat head screwdriver to remove any residual lint before you install the new filter.
Fixes these symptoms
Installation Instructions
Sheryl from SPRINGFIELD, MO
Dryer not heating
I followed video instruction in disassembling and set screws from each section into diferent small bowls in the order they were removed. Hardest part was some of the screws were really hard to get loose without stripping them and my control panel did not match video but I figured it out. Replacing the parts were easy and putting it back together. While it was apart I cleaned everything including fan blower wheel. Thanks for the right parts and your online video. With your help and a prayer this 62 year old woman fixed the problem and dryer runs like new. Read more...
Your Price
$40.69
  In Stock
Washer FILTER LINT
★★★★★
★★★★★
4 Reviews
PartSelect Number PS11774537
Manufacturer Part Number WE18X25102
This lint filter, also referred to as a lint screen, is specially designed for various models of dryers and washer/dryer combos. It is responsible for capturing lint and debris from clothing during the drying cycle and preventing it from clogging the dryer vent. If the filter is damaged and no longer able to carry out this function you may notice longer dryer times, overheating, and excessive lint build up in the dryer vent, which creates the risk of a fire hazard. Regular cleaning and maintenance of the lint filter are essential to keep the dryer operating efficiently and safely. It is recommended to clean the filter after every use.
Your Price
$26.73
  In Stock
Washer Pump Filter
★★★★★
★★★★★
10 Reviews
PartSelect Number PS3522306
Manufacturer Part Number 383EER2001A
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.
Fixes these symptoms
Installation Instructions
Sandra from Livonia, MI
The pump filter leaked after cleaning it out. Would work with teflon tape, but wanted to see if a new part would eliminate the need to wrap it every time.
Unscrewed the old part; screwed in the new part and said a quick prayer - LOL!
The part worked great, but I wanted to mention how quickly I received the part!
I would definitely order from this company again!
Read more...
Your Price
$22.88
  In Stock
Washer Inner Tub Filter Plug Kit
PartSelect Number PS334684
Manufacturer Part Number 285868
Kit contains 4 plugs - replaces the lint filter that goes under spin basket. The filter under the spin basket is no longer required. Replaces round filter assembly.
Fixes these symptoms
Installation Instructions
Bob from East Palestine, OH
The motor turned with loud noise ,but nothing else worked
I used "Emley's Cheap and Easy Repair" book to remove,install and reassemble the machine.
A lot of time was used to clean the filthy tub and basket.
While replacing the broken motor coupling I decided to replace some of the seals.
PartSelect got the ordered parts to me in a couple of days.
I wouldn't hesitate to do the job again.
Read more...
Your Price
$13.60
  In Stock
Washer Screen
★★★★★
★★★★★
1 Review
PartSelect Number PS11746894
Manufacturer Part Number WP96160
Found on the water inlet valve.
Installation Instructions
Peter from Aurora, IL
The fill cycles would start then stop suddenly
This was an easy repair.
1st I removed both water hoses
2nd I removed 1 hex head screw that released a backing plate & removed the plate holding the water inlet valve.
3rd I pulled the 4 electrical connections & loosened a clamp to remove a small water hose.
4th I removed 2 hex head screws that held the water valve to the backing plate.
-----------that was a whole 5 - 10 minutes!------------
Next I reversed the process
4th I attached the inlet valve with the 2 hex head screws
5th re-attached the 4 electrical connections(had slip on spades) pushed on the hose & tighterned the clamp.
6th replaced the backing plate with the inlet valve attached & tightened the single hex head screw.
7th re-attached the hot & cold lines................................DONE
15 minutes tops
Read more...
Your Price
$102.73
  In Stock
Washer Agitator Lint Filter
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11743344
Manufacturer Part Number WP63840
This lint filter sits on top of your washer's agitator. Not only does it filter the lint out of your washing machine, but it also helps the agitator to move clothing around on the inside of your washing machine.
Fixes these symptoms
Installation Instructions
Virginia from Philadelphia, PA
The old lint filter was worn, and would "pop up" so that clothes weren't being moved about during the wash and rinse cycles. If I didn't frequently push it down again, it would fly off during a spin cycle. Dangerous!
I simply lifted the lint filter and its cap off, pressed the new agitator cap onto the new lint filter and put the assemblage into place. No tools needed at all. A $50 dollar repair saved me from replacing my washer/dryer! I'm very pleased. Read more...
Your Price
$13.69
  On Order
Washer FILTER
PartSelect Number PS11766068
Manufacturer Part Number 5304505165
Your Price
$119.97
  In Stock
Washer Lint Filter and Upper Agitator
★★★★★
★★★★★
6 Reviews
PartSelect Number PS11743343
Manufacturer Part Number WP63753
This part serves two functions for your washing machine: lint filter and upper agitator.
Fixes these symptoms
Installation Instructions
Patty from Caldwell, ID
Dishwasher leaving food residue on all dishes
Had to take apart dishwasher and replace chopper assembly. The dishwasher had a lot of debris in in including pieces of broken plastic forks. Now works great Read more...
Your Price
$16.46
  In Stock
Washer Water Inlet Valve Filter Screens
★★★★★
★★★★★
2 Reviews
PartSelect Number PS3618281
Manufacturer Part Number AGM73269501
This includes one orange screen and one blue screen.
Installation Instructions
Keith from ROCKAWAY, NJ
Water was leaking into washing machine after the washer was shut off
Removed the cover from the washing machine, the two valves(cold & hot) are located in the read top of the machine, removed the hoses to the valves, removed the nut that holds on the valve to the washer and placed new valve into washer and placed the nut back onto new valve, placed the hoses back onto the new valve. Read more...

Washer Filter Brands