Roper Refrigerator Brackets and Flanges
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Roper Refrigerator Brackets and Flanges
Your Price
$16.95
In Stock
Roper Refrigerator Control Bracket
PartSelect Number PS11739027
Manufacturer Part Number WP2180226
This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socket in the freezer dispenser section in place. Its measurements are roughly 9 inches long and 5 inches high, and this model comes in white. The tools you will need in order to do this repair include a Phillips screw driver, a quarter-inch nut-driver, and a pair of needle-nose pliers. If your ice dispenser is not working properly, your bracket could be the problem.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- Not dispensing water
- See more...
Installation Instructions
BILL from BATESVILLE, MS
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks
Read more...
Roper Refrigerator Bracket Door Stop
First step was to determine whether the screws were metric or US standard - they are metric. The next step was to remove the top hinge in order to remove the door and replace the bottom cams and brackets. This took a couple of minutes, replacing the cams was about 5 minutes and putting the door back on the pivot and reattaching the top hinge was another couple of minutes.
If I had called a service tech they would have charged a minimum of two hour and for the parts. I estimate that I saved myself about $100. Read more...
PartSelect Number PS11739622
Manufacturer Part Number WP2206629B
Fixes these symptoms
- Door won’t open or close
- See more...
Installation Instructions
Enrique from Tigard, OR
The refrigerator door was difficult to maintain closed
Because the lower cams are made out of hard plastic the repeated opening and closing of the door wore them out. The hardest part was taking all of the food that is normally stored in the door.First step was to determine whether the screws were metric or US standard - they are metric. The next step was to remove the top hinge in order to remove the door and replace the bottom cams and brackets. This took a couple of minutes, replacing the cams was about 5 minutes and putting the door back on the pivot and reattaching the top hinge was another couple of minutes.
If I had called a service tech they would have charged a minimum of two hour and for the parts. I estimate that I saved myself about $100. Read more...
Roper Refrigerator Bracket
PartSelect Number PS16221228
Manufacturer Part Number W11500948
This bracket is used in conjunction with the ice maker.
Roper Refrigerator Fan Motor Retainer/bracket
PartSelect Number PS11738921
Manufacturer Part Number WP2155590
Roper Refrigerator Bracket Dispenser
I purchased this Bracket Dispenser for $6.00 and it fit on My fridge perfectly. I just used the screw hole that was a little higher on the water dispenser. Simply cut off the broken end / or Buy a new Hose (Cost at Lowes about $6.00) guide hose along the bracket and use a socken set to reinstall the screw. Water is not squirting on people any more. Read more...
PartSelect Number PS11740253
Manufacturer Part Number WP2304673
Installation Instructions
Sean from Boise, ID
Water dispenser hose tip broken.
The part to fix this was a $50.00 part. I purchased this Bracket Dispenser for $6.00 and it fit on My fridge perfectly. I just used the screw hole that was a little higher on the water dispenser. Simply cut off the broken end / or Buy a new Hose (Cost at Lowes about $6.00) guide hose along the bracket and use a socken set to reinstall the screw. Water is not squirting on people any more. Read more...
Roper Refrigerator Fan Support Bracket
PartSelect Number PS11749692
Manufacturer Part Number WPW10180172
Roper Refrigerator Gate Support - Right Hand
PartSelect Number PS364082
Manufacturer Part Number 4357293
This gate support is designed to support the gate or fence on your vertical freezer. This part is designed for the right-hand side and differs from the left-hand side gate support. Be sure to note which side of your gate support is damaged before ordering this part. This product is sold individually. It is white in color and is made entirely of plastic. The gate support is approximately 6.5 inches in length and slightly less than an inch in width. This is an OEM part sourced directly from the manufacturer.
Roper Refrigerator Fan Motor Bracket
PartSelect Number PS11739038
Manufacturer Part Number WP2181929
Related Roper Refrigerator Parts
- All Roper Refrigerator parts
- Roper Refrigerator Caps and Lids
- Roper Refrigerator Compressors
- Roper Refrigerator Dispensers
- Roper Refrigerator Doors
- Roper Refrigerator Drawers and Glides
- Roper Refrigerator Fuses
- Roper Refrigerator Handles
- Roper Refrigerator Hardware
- Roper Refrigerator Hinges
- Roper Refrigerator Hoses and Tubes
- Roper Refrigerator Ice Makers
- Roper Refrigerator Lights and Bulbs
- Roper Refrigerator Motors
- Roper Refrigerator Seals and Gaskets
- Roper Refrigerator Switches
- Roper Refrigerator Thermostats
- Roper Refrigerator Trays and Shelves
- Roper Refrigerator Valves
- Roper Refrigerator Wheels and Rollers
- Roper Refrigerator Wire Plugs and Connectors