YKHMS1850SW0 KitchenAid Microwave - Instructions

Attached bracket to wall with screws and hung microwave oven. Very easy project.

Remove the screws from the unit metal tabs. Insert two locator tabs of the grill into the slits in the unit and install the two mounting screws. SIMPLE

Arrived in 24hours!!! Great.

There are two screws that hold the unit on. Very simple to install. When you clean the vent grille don't push too hard on it or you will be replacing it again...

Took out the screws and replaced the vent. (here is a trick, to make getting the screws in a rather hard to reach area I glued them to the end of the screwdriver-super glue)

Slide the old one out of the slot and insert the new one in its place.

Twas really easy considering that all I had to do was place the plate back in the microwave. Easy Peasey

Tray arrived in a short period of time and was a perfect match.

Unscrewed light cover then inserted lights. When I called your company gave them the model Number they knew the exact part needed promptly mailed the replacement lights.

Used the new parts, they were a perfect match, I completed the work in 5 mins or less. The pictures provided were very helpful, and parts were delivered very fast. Price was the lowest too!!

Removed the glass cover and replaced the bulb. Very simple.

I just opened the box and set it in. Took all of two minutes.

Easy, perfect

The part was shipped quite fast. I received it after 3 days of my order. Installing the part was a breeze. Took about 5 minutes. The part was as described and looked identical to the original one.

The problem I have with changing the bulb is my microwave is an overhead one and therefore I cannot tip it on its side to easily replace the bulb. I have to drop the lid down and carefully install the new bulb from underneath.