P20010 - Overview
Models starting with P20010
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Flange Wheel Bearing
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$9.18
In Stock
Lawn Mower Ring Clip
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It i...
$5.95
In Stock
Lawn Mower Hex Head Bolt
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
In Stock
Lawn Mower Washer
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
On Order
Lawn Mower Axle Hub Cap
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$5.95
In Stock
Lawn Mower Ignition Switch
PartSelect #: PS9020864
Manufacturer #: 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various fu...
$24.40
In Stock
Lawn Mower Hardened Washer
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$4.99
In Stock
Plastic Slider w/Metal Insert
PartSelect #: PS9939457
Manufacturer #: 310920001
This is the plastic slider for your trimmer. It is made of plastic and metal and is white and color. It measures approximately 2 ½ inches long and 1 inch wide. The slide works with the spool and uses ...
$5.95
In Stock
Common Symptoms of models starting with P20010
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Parts Used:
-
Anthony from OLIVEHILL, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
22 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
-
Gary from PILESGROVE, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wore out parts
NOTE: Ryobi parts are interchangeable with other model and part numbers. Item needed was no longer available. But keep looking for something that would work. Found item that look just like what I needed. It worked with no problems or issues.
Replaced trimmer spool and grass deflector assembly that was wore out and causing line t ... Read more o wrap around spool base. Simple change out. Remove 3 Philip screws to remove defector. Hold shaft base with needle nose pliers and turn spool base counterclockwise to remove spool base. Reverse steps to assemble back. Having the right tools helps. Spray screw head with WD-40 let sit a few minutes will help loosen dirty old the screw.
Replaced trimmer spool and grass deflector assembly that was wore out and causing line t ... Read more o wrap around spool base. Simple change out. Remove 3 Philip screws to remove defector. Hold shaft base with needle nose pliers and turn spool base counterclockwise to remove spool base. Reverse steps to assemble back. Having the right tools helps. Spray screw head with WD-40 let sit a few minutes will help loosen dirty old the screw.
Read less
Parts Used:
-
Maire from HARLINGEN, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!