GMC930J*119 General Electric Dishwasher - Instructions

We went to the Part Select site and described the problem and they recommended a new piston and nut assembly and even provided a video on the installation. The only difficulty was removing the old piston and nut assembly which was corroded and broke off during removal. Once it was out installing the new part was very easy. And best of all the dishwasher completely drains. We had an estimate of $150 for a repair house call which would probably have resulted in another house call to actually install the part. With Part Select we received the part the next day, spent only about $18 and fixed the dishwasher in 24 hours--what a great experience!

Remove grid at inside at very back. At center under grid is the valve, unscrew CCW, and replace with new valve. Replace grids.

looked up the model no. on partselect web site and they discribed several diagnoses for different problems.they gave a 19% probability for a bad valve and nut. i removed the cover and the nut valve and the valve looked pretty bad. i ordered a new part and delivery was very good.i replaced the part and that took care of my problem. i was very happy with the whole repair.

Original part no longer made. Substitute too small by a half an inch. Corrected the problem by removing the 4 corner wheels from the old rack and put them on the new one. Now, it fits and works perfectly.

I cleaned all the drains in the dishwasher and the drain in the garbage disposal that leads from the dishwasher. I also removed the piston and nut assembly and tried cleaning it but the dishwasher still did not drain. I was using a wet vac to empty the standing water after the cycle completed. I bought the new piston and nut assembly. It arrived in 24 hours. I unscrewed the 4 screws in the back of the dishwasher that held the screen that covered the assembly, used my hand to unscrew the piston and nut assembly, screwed in the new part and replaced the screen and 4 screws. It completely fixed the problem.

Simply followed the instructions for the part on the part page. One thing that helped taking out some screws was to remove a couple of the brackets that hold the heating element and move it slightly. I would suggest cleaning all of the gunk out of drains and clean all holes in the screens using a toothpick, etc. Be careful not to overtighten the nut for the next time you have to do this!

Unscrew old stripped out one and put in new one ..wala!! Easy repair for this old lady...

Ordered a new basket it was a little large as I ordered the wrong size. I just broke of the tabs that held it in and now its perfect and larger !!!! Simple and great service !!!