Back
Back
Keep typing for more specific results...
Models > 3-RACK > Instructions

3-RACK Maytag Dishwasher - Instructions

All Instructions for the 3-RACK
91 - 105 of 137
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The tines on the dishwaser rack were broken and order new piece and snapped in place
Needed a new set of tines to hold bowls in the dishwasher. Typed in brand and model number. was able to order parts from schematic. I received and took old part out and snapped in new piece and all worked good.
Parts Used:
Front Convertible Tine
  • Lonnie from Springfield, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer arm got broken
unsnapped the broken piece from the under side of the top rack; assembled new washer arm and snapped back in place under the top rack.
Parts Used:
Upper Spray Manifold Truss Head Screw Upper Spray Arm
  • Suzan from Waldorf, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was not washing properly
now the dishes come out clean.
Parts Used:
Middle Spray Arm Manifold Kit Upper Spray Manifold Upper Wash Manifold Clip - Rear Middle Manifold Clip - Rear Middle Wash Arm Fold Away Tine Latch Dishrack Tine Pivot MOUNT Fold Away Tine Latch Fold Away Tine Pivot Upper Wash Manifold Clip - Front Upper Spray Arm
  • DIhan from Irving, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheels on lower broken
Removed the broken wheels. Snapped the new wheels on and replaced the basket
Parts Used:
Lower Wheel Assembly
  • susan from shady shores, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
plastic part broke
Part came very fast.....took old broken part out and replaced with new one...no problems...
Parts Used:
Fold Away Tine Latch Fold Away Tine Pivot
  • Larry from Mercer, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The wheel axle snapped off so the bottom dishwasher tray didn't close correctly
eash as pie. snap them onto the piece of frame on the bottom rack and the problem is solved
Parts Used:
Lower Wheel Assembly
  • Norman from Worthington, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
fold away tine pivot had broken
I've done this before, so took about 2 minutes. Just take out the old tine pivot that had a broken end and snapped in the new one. Done!
Parts Used:
Fold Away Tine Pivot
  • Samuel from Laramie, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
I got my parts from you
I haven't gotten to our rental to get the job done yet but it should go real easy because the broken one came off real easy these should go on just as easy. Thanks again for the parts
Parts Used:
Lower Wheel Assembly
  • Angela from Whitehall, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dishes no longer coming out clean
It was easy to replace all the washer arms; the manifolds were easy as well, but there is tab that breaks as you take them out. At any rate, the dishes are back to coming out clean. I think we managed to get a piece of plastic in the dishwasher that was chewed up and blocking some of the nozzles. It seems fine now.
Parts Used:
Middle Spray Arm Manifold Kit Upper Spray Manifold Dishwasher Lower Spray Arm Shield Included Middle Wash Arm Wash Arm Cap Upper Spray Arm
  • David from Alexandria, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
missing plastic nut on lower wash arm
Remove lower basket. put nut on verticle shaft, turn clockise by hand, use pliers gently to secure and replave lower basket.
Parts Used:
Wash Arm Cap
  • James from Poughquag, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Fold away tines broke and plate stands would not stand up
Snapped new tines on.
Parts Used:
Fold Away Tine Pivot
  • Janet from Rochester, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
rinse water very dirty leaving crud on dishes
I first ran a cycle of clear glass to verify that there was something wrong. I pulled an exploded parts diagram off the internet to see what parts there were and to give me an idea how everything came apart. I slowly took piece by piece< keeping all screws seperated with the part they belonged with. I set the parts in the order they came out so I knew what way they would have to be returned to the machine. I cleaned and inspected all parts to ensure they were in working order. When I removed the accumulator filter I noticed all the screens were caked with what appeared to be soap scum. I then noticed one of the screens was tore away from the filters body about a half inch long. I decided to order the part(which was a sunday). The part was on my door step by tuesday morning( with standard shipping). I had the part reinstalled in 10 minutes. The hardest part of the whole job was getting all the slats on the filter to line up with the ones on the cover to be screwed onto it. They need to be lined up or the screws will not go in properly, which would be a whole different bag of worms. The job was seriously simple and the ease of ordering and receiving the part made it that much better. Thank you for being a great service to the service industry.
Parts Used:
Dishwasher Accumulator Filter
  • jeremy from kankakee, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
lower wheel assembly broke off
just snapped the wheels on. It took less than 10 minutes.
Parts Used:
Lower Wheel Assembly
  • Deena from Litchfield, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The dishes had grime on them. The filter was torn.
Removed the old filter and installed the new one.
Parts Used:
Dishwasher Accumulator Filter
  • Lisa from Vista, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
not cleaning dishes and food left on dishes
me i didnt do the repair my wife did and let me tell you that i was inpressed that she was able to disassemble and replace the accumulator filter with no problem by herself she followed the advice of others on this site and i want to thank everyone for making this a easy job that anyone can do themselfs
Parts Used:
Dishwasher Accumulator Filter
  • anthony from coram, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3-RACK
91 - 105 of 137