EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Keep typing for more specific results...
Models > 107RH971F > Instructions

107RH971F Hotpoint Range - Instructions

All Instructions for the 107RH971F
31 - 38 of 38
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Plastic Insert for knob to long, had to use my bench grinder to cut it down
(Turn off the Power) Pull stove out, remove the 2 screws that holds switch in place, remove one wire at a time and install on new switch. Slip switch in replace 2 screws. Snap off about 3/4 of the shaft cut down plastic insert for knob, install knob turn on power and it works.
Parts Used:
Range Infinite Heat Switch Kit
  • Floyd from Warren, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
only half of burner working
Replaced the old with the new following directions (mostly).
Parts Used:
Tilt Lock Hinge Mounted Surface Burner Kit - 6"
  • KENNEDY from OCEAN GROVE, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 107RH971F
31 - 38 of 38