1064650043714 Kenmore Refrigerator - Instructions

Ordered part, watched video. Had a problem with reassembly of ice crushing assembly, did a re-do as one of the blades had dislodged from the drive shaft!

Repair was easy enough, take apart and put it back in reverse.

Once I removed the ice bin from the freezer section of refrigerator and removed all the necessary screws was able to remove the auger drum, but had some difficulty in reinstalling the crusher blades in the dispenser. After several tries, got it right and dispenser is performing like new.

After watching a video on you tube, the repair was very simple and easy.

I installed a Ice Door Kit. It works Great Now!

new auger and drive wheel

The video for the repair was very helpful and made the repair go very well. It works just like new!!

auger blade was replace

I removed the external shaft that controls the ice grinder. Its spring loaded so you have to remember how to get it back together. I removed the screws that hold the cover in place. I removed the nylon nut that holds the drum and grinder on the center shaft. I replaced the drum and reversed the procedure.

Opening up the Evaporator Fan section was a quick and easy job. After opening, I checked and removed the fan and looked at the grommet. The grommet on the fan was tight and secure and I could no longer hear the noise. I closed the opening. Something I had done while checking the fan grommet must have solved the problem. I have not hear the noise again!

According to all the information on the internet diagnosing the problem with my in door ice dispenser, the problem seemed to be with the solenoid which I ordered from PartSelect. However, when I got into the repair, I found the problem was with the electrical switch that activated the ice dispenser. A couple of the plastic studs that hold the switch in place had broken which did not allow the switch to be activated. I replaced the small plastic keeper study with small screws and now the ice dispenser works fine.

Did it entirely by myself while my husband was at work

Took off all screws on box.Removed front of drawer,removed back-up to drawer and auger as one unit. Removed C-clamp on end of auger,this released all the parts. The end of the auger shaft unscrews, remove broken piece and reverse process with new part

removed old parts from bin and installed new bin

Awesome price, awesome service, and great experience. I must say I was apprehensive about repairing my refrigerator’s ice maker, but the pieces of plastic and the $150 estimate to repair the bad part helped to motivate me into action. I quickly found the part I needed on your website at a reasonable price and placed the order. I fully expected to wait 6 – 8 weeks for the part to arrive but to my great surprise it arrived in just two days! I maintained and repaired complex ordinance and missiles in the Air Force for 21 years but a couple of steps in the repair of this icemaker stymied me, until that is, I watched your repair video! What a wonderful resource that was, step-by-step instructions on the entire repair…. Armed with this resource a guy just can’t go wrong and in short order the repair was complete and I am back to crushing ice again. What a wonderful service you provide and I couldn’t be a happier customer. You folks at Partselect.com have your stuff together, keep up the good work.
Mr. William L. Austin, M.Ed.