MTD Trimmer Parts

PartSelect Number PS10009586

Manufacturer Part Number 753-06183

This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines are clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Erik from ROBERTSDALE, AL

Fuel line broke

Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done. Read more...

Fuel Tank Assembly W/Fuel Lines Incl. 29 – Part Number: 753-06797

Your Price

$26.83

MTD Trimmer Fuel Tank Assembly W/fuel Lines Incl. 29

PartSelect Number PS11812933

Manufacturer Part Number 753-06797

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Robert from ORANGE, CA

One of the two fuel lines cracked and leaking

Removed the 6 screws holding the red plastic cover, tank, and the old fuel lines from the carburetor. Placed the new tank in the sunlight for a few minutes to soften the new fuel lines. Then attached the new lines to the carburetor and replaced the cover Read more...

Line trimmer cutting head assembly – Part Number: 841-013303S

Your Price

$18.75

MTD Trimmer Line Cutting Head Assembly

PartSelect Number PS16583608

Manufacturer Part Number 841-013303S

Installation Instructions

david from NORTHFIELD, MA

My old Troy Bilt trimmer head was falling apart

Just screwed it on the machine. Left hand threads.
The new one seems like a quality item. Of course trimmer line came pre-installed, ready to go. Read more...

Trimmer Glide Cap – Part Number: 753-08170

Your Price

$5.99

MTD Trimmer Glide Cap

PartSelect Number PS10009817

Manufacturer Part Number 753-08170

This genuine OEM glide cap, is also referred to as a fixed line head. It protects the cutting line of your string trimmer and prevents it from coming into contact with sidewalks or curbs. Housing the cutting head assembly, it guides and helps the trimmer smoothly glide along the edges without causing damage to the line or the machine. The glide cap is typically found at the bottom end of the trimmer head, where the cutting line extends. The cap is made out of plastic and wears out over time, especially when it rubs against the ground. You may also notice that the string feeds outside of the head uncontrollably. To remove the glide cap, simply depress its locking tabs on each side and pull it away from the cutting head. Install the new glide cap by aligning it with the correct notches on the trimmer, pushing it into place, and using a screwdriver to secure the tabs. Please bear in mind that the glide cap is sold separately from the rest of the cutting head assembly.

Trimmer Fuel Return Line – Part Number: 791-181086

Your Price

$7.89

MTD Trimmer Fuel Return Line

PartSelect Number PS9137685

Manufacturer Part Number 791-181086

The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.

Installation Instructions

Howard from NEWBURGH, IN

Dry rot hoses

Took off old and new parts went right in place. Read more...

Head Asm Cnt Jr – Part Number: 841P035132S

Your Price

$22.42

MTD Trimmer Head Asm Cnt Jr

PartSelect Number PS16996162

Manufacturer Part Number 841P035132S

Trimmer Primer and Hose Assembly – Part Number: 791-683974B

Your Price

$27.42

MTD Trimmer Primer And Hose Assembly

PartSelect Number PS10014772

Manufacturer Part Number 791-683974B

This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their function of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

Fixes these symptoms

Will Not Start
See more...

Trimmer Cutting Head Assembly – Part Number: 753-08169

Your Price

$15.45

MTD Trimmer Cutting Head Assembly

PartSelect Number PS10009816

Manufacturer Part Number 753-08169

Discover the cutting-edge MTD Head Assembly, uniquely designed to help maintain the high performance of your appliance for longer. The Fixed Lin Head Assembly is renowned for its durability and efficiency, making it an asset for any appliance user. It plays an indispensable role in the functionality of your device, providing seamless operation. Specially built by MTD, this kit ensures precise fitting and uncompromised performance, putting it a class above standard parts. If you're seeking a long-lasting solution to your appliance repair needs, investing in an MTD Fixed Lin Head Assembly may be the smart choice. When it comes to quality and performance, you can trust MTD to deliver unmatched excellence. This is the commitment that MTD assures with every product like this cutting head assembly. Equip your appliance with this MTD component for improved performance and reliability.

Trimmer Fuel Line and Filter – Part Number: 791-682039

Your Price

$20.76

MTD Trimmer Fuel Line And Filter

PartSelect Number PS10014709

Manufacturer Part Number 791-682039

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Howard from NEWBURGH, IN

Dry rot hoses

Took off old and new parts went right in place. Read more...

Trimmer Bump Head Knob – Part Number: 791-153066B

Your Price

$14.78

MTD Trimmer Bump Head Knob