MTD Trimmer Caps and Lids

MTD Trimmer Glide Cap

★★★★★

★★★★★

2 Reviews

This genuine OEM glide cap, is also referred to as a fixed line head. It protects the cutting line of your string trimmer and prevents it from coming into contact with sidewalks or curbs. Housing the cutting head assembly, it guides and helps the trimmer smoothly glide along the edges without causing damage to the line or the machine. The glide cap is typically found at the bottom end of the trimmer head, where the cutting line extends. The cap is made out of plastic and wears out over time, especially when it rubs against the ground. You may also notice that the string feeds outside of the head uncontrollably. To remove the glide cap, simply depress its locking tabs on each side and pull it away from the cutting head. Install the new glide cap by aligning it with the correct notches on the trimmer, pushing it into place, and using a screwdriver to secure the tabs. Please bear in mind that the glide cap is sold separately from the rest of the cutting head assembly.

MTD Trimmer Air Filter Cover Assembly

MTD Trimmer Push Cap (1/2")

MTD Trimmer Air Cleaner Cover Assembly (incl. 26)

MTD Trimmer Air Cleaner Cover Assembly

MTD Trimmer Fuel Tank Cap Assembly This fuel tank cap, also known as the gas cap, is designed for use in various lawn and garden power equipment. It is a manufacturer-approved cap that is made of plastic, and measures 2 inches in diameter, with internal threading for easy installation and removal. The cap is responsible for sealing the tank to prevent fuel/oil leakage and prevent dirt and debris from entering the tank. The cap can fail if the threads wear down, or if the plastic body becomes damaged. A faulty fuel tank cap will result in leakages, increased fuel evaporation, contamination, and reduced engine performance. Before removing the cap, first ensure that the fuel tank is depressurized to prevent fuel spray and potential fire hazards. Next, unscrew the faulty fuel tank cap using your hands, and then thread the new cap on and tighten it until it is secure.

MTD Trimmer Spool Cap

MTD Trimmer Head Cap

MTD Trimmer Push Cap X 1/2" Rod The Push Cap Rod is a 1/2-inch metal metal cap which can be easily installed with a hammer and pliers. This manufacturer certified part comes in silver and is made of metal. This cap attaches onto an axle to help the wheel stay attached. If broken, the wheel will fall off and the part should be replaced.

MTD Trimmer Fuel Cap

★★★★★

★★★★★

2 Reviews