Back
Back
Keep typing for more specific results...

LG Washer Dryer Combo Parts

Popular LG Washer Dryer Combo Parts

Your Price
$34.63
   In Stock
LG Washer Dryer Combo Dryer Lint Filter
★★★★★
★★★★★
170 Reviews
PartSelect Number PS3531962
Manufacturer Part Number ADQ56656401
The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.
Fixes these symptoms
  • Clothes Still Wrinkled
  • Door won’t close
  • Marks left on clothes
  • See more...
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw. Read more...
Your Price
$44.07
   In Stock
LG Washer Dryer Combo Dryer Lint Filter Cover
★★★★★
★★★★★
23 Reviews
PartSelect Number PS3534930
Manufacturer Part Number MCK49049101
This is an authentic dryer lint filter cover sourced directly from the manufacturer. It protects the more delicate lint filter in your dryer, so that it doesn’t get damaged and lint can’t mix in with your clothes. This product is gray in color and is made of plastic. It is sold individually. The manufacture has modified the part and suggests replacing the filter guide also. Please see your specific model information to locate the filter guide.
Fixes these symptoms
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw. Read more...
Your Price
$17.79
   In Stock
LG Washer Dryer Combo Magnetic Door Plunger
★★★★★
★★★★★
73 Reviews
PartSelect Number PS3618292
Manufacturer Part Number AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door plunger attaches to the inner door panel of the washer. It holds the door open when the washer is not running, and allows the door and tub seal to dry. This prevents mold and mildew from building up. Occasionally, the plastic tabs on the housing can break, and when this happens the part will need to be replaced. You may also notice that your washer lid or door will not close; this can also be a sign of a damaged magnetic door plunger.
Fixes these symptoms
  • Leaking
  • Lid or door won’t close
  • Locking Issues
  • See more...
Installation Instructions
Omnitech from Warrenville, IL
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replace the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger Read more...
Your Price
$147.13
   In Stock
LG Washer Dryer Combo Water Inlet Valve
★★★★★
★★★★★
74 Reviews
PartSelect Number PS12374721
Manufacturer Part Number AJU75152601
This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.
Fixes these symptoms
  • Leaking
  • No hot or cold water
  • Water Filling Issues
  • See more...
Installation Instructions
Flora from MIAMI, FL
Water continued leaking into washer after the end of cycle through the water inlet valve.
Did the repair Myself. Saved $ 400.00 in the process. Read more...
Your Price
$20.67
   In Stock
LG Washer Dryer Combo Clamp Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS3530864
Manufacturer Part Number ACA56078801
This is an outer seal clamp designed for use within LG washing machines. This clamp tightens and secures the gasket that seals the washer tub from the door. If your gasket is loose fitting and is not damaged or warped, this clamp is likely worn out and in need of replacing. This clamp is an OEM part and is made entirely of metal, with a strong tension spring in the middle. This outer seal clamp is sold individually and will require a set of pliers to replace.
Fixes these symptoms
Installation Instructions
Randy from PETERSBURG, WV
Old smelly boot seal ... 10 years old, bottom drain in boot plugged with dog hair.
Followed instructions in this youtube video:

https://www.youtube.com/watch?v=xp5sV_1SSKw

Step by step instructions were clear and concise. Easy job. Saved hundreds by not having a repair person come to the house.
Read more...
Your Price
$174.98
   In Stock
LG Washer Dryer Combo Washer Drain Pump Assembly
★★★★★
★★★★★
16 Reviews
PartSelect Number PS11706439
Manufacturer Part Number 5859EA1004P
This drain pump is for washers. Drain pump removes water from the washer during the drain portion of the cycle. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
Installation Instructions
Jesus from El Paso, TX
It did not drain water, cycle stops at rinse+spin.
1-Take water off manually. 2- Take machine to back yard. 3- lay machine 45 degrees. 4- Located water bump, (rear left side). 5-removed drain black hoses with hand. 6-removed 3 screws from bump frame. 7-Taker off all unit and marked down cable position at plug. 8- installed new pump. 9- Reverse all steps. Note: I did not use new cable supplied with the new bump, I did not want to mess around on mother board connections, I kept old wire harness which are only two cables blue and gray. It took me less than 30 minutes. Read more...
Your Price
$135.68
   In Stock
LG Washer Dryer Combo Inlet Valve Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS3527452
Manufacturer Part Number 5221ER1003A
This valve is used for cold water, bleach dispenser and prewash cycles. It has a standard hose fitting inlet with 2 outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left.
Fixes these symptoms
Installation Instructions
Keineth from DALLAS, TX
None
Took the one off that was leaking and put the other one on Read more...
Your Price
$44.83
   In Stock
LG Washer Dryer Combo Washer Pulsator Cap
★★★★★
★★★★★
16 Reviews
PartSelect Number PS3525704
Manufacturer Part Number 5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Fixes these symptoms
Installation Instructions
Kristen from Safford, AZ
Washer pulsator was coming loose during wash cycle.
Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding (where the screw goes) which may have caused the problem to begin with. Read more...
Your Price
$52.48
   On Order
LG Washer Dryer Combo Damper Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS11707466
Manufacturer Part Number ACV72909503
This friction damper assembly in your washer stabilizes the tub or drum. It absorbs the movements and vibrations during the spin cycle to keep the machine steady and reduce noise. It connects the tub to the cabinet. If the assembly is broken, your washer may be excessively noisy or shaky. This genuine OEM replacement part is sold individually, and separately from the shock absorbers.
Fixes these symptoms
Installation Instructions
Donette from Klamath Falls, OR
Noise and vibration when spinning
Used a video to explain how to do repair. Video showed about 1 1/2 hours, took probably 4 hours at least. Bearings were very difficult to remove and were in very bad shape for a 4 1/2 year old washer. We were very lucky and did not have a spider that needed to be replaced. All and all not to bad of a repair, but without the video we found it would have been a guessing game of how to do the repair. Parts all worked well and the washer is now quiet as a mouse in the spin mode. Spending $200.00 instead of a new washer was the goal and it was completed. Here's hoping to more than 4 additional years before another repair is required. Read more...
Your Price
$30.38
   In Stock
LG Washer Dryer Combo Filter Guide
★★★★★
★★★★★
7 Reviews
PartSelect Number PS3535278
Manufacturer Part Number MEA49050001
This is a replacement lint screen guide for your dryer. The lint screen guide attaches to the front bulkhead and supports the lint screen. If your lint screen will not stay in place, or if you are noticing marks left on your clothes, a broken lint screen guide could be to blame. The lint screen guide is approximately 13 inches wide on its straight edge. It is made of plastic and is sold individually. This is an OEM part, directly from the manufacturer.
Fixes these symptoms
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw. Read more...

LG Washer Dryer Combo Appliance Types

Related LG Washer Dryer Combo Parts

Popular LG Washer Dryer Combo Models

Below are the most popular LG Washer Dryer Combo models we have. Enter your model number in the search box to find your model.