Hotpoint Range Valves
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Hotpoint Range Valves
Your Price
$34.95
In Stock
Hotpoint Range Burner Cap Black Medium 9500 Btu
PartSelect Number PS954202
Manufacturer Part Number WB29K10023
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.
Installation Instructions
John from Simi Valley, CA
Missing burner head and all 4 caps on cook top.
All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor!
Read more...
Your Price
$33.95
In Stock
Hotpoint Range Burner Cap
PartSelect Number PS954203
Manufacturer Part Number WB29K10024
This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and about 3 and a half inches in diameter. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.
Installation Instructions
John from Simi Valley, CA
Missing burner head and all 4 caps on cook top.
All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor!
Read more...
Your Price
$80.31
In Stock
Hotpoint Range 8 Surface Burner
PartSelect Number PS17626203
Manufacturer Part Number WB31X46066
This surface element is designed to deliver heat to a specific cooking area on the top of an electric range, providing consistent and efficient performance for everyday cooking tasks. Positioned beneath the cooktop surface, it plays a key role in maintaining accurate temperature control. For safety, always unplug the range or switch off the appropriate circuit breaker before beginning installation. Wearing protective work gloves is also recommended to prevent injury while handling electrical components.
Fixes these symptoms
- Element will not heat
- See more...
Your Price
$44.95
In Stock
Hotpoint Range Burner Head
PartSelect Number PS1480992
Manufacturer Part Number WB16T10046
This part is the replacement surface burner head for your gas range. It is silver in color and is approximately 3.5 inches in diameter. This burner is sold individually. The burner head distributes gas to create an even flame across the cooking area. If you notice that your food is not cooking evenly, or you are not getting an evenly distributed flame, you may need to replace the burner. The burner is located beneath the burner cap, below the grate. To remove the burner, simply remove the grate and the burner cap, then lift the burner head out. Replace it with the new burner and reinstall the cap and grate. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
Alejandro from Newark, NJ
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple.
Read more...
Your Price
$21.95
In Stock
Hotpoint Range Burner Cap 5000 Btu
PartSelect Number PS954201
Manufacturer Part Number WB29K10022
This is a burner cap for your gas range. The cap is black in color and about 3 inches in diameter. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.
Installation Instructions
John from Simi Valley, CA
Missing burner head and all 4 caps on cook top.
All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor!
Read more...
Your Price
$49.95
In Stock
Hotpoint Range Burner Head
PartSelect Number PS1020327
Manufacturer Part Number WB16K10055
This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will not light up, or there are heating inconsistencies, replacing the burner head could be the solution to your problem. No tools are required for this installation. To change the burner, first lift the grate and take the burner cap off. Next, lift the burner away from the cooktop. To set the new burner in place correctly, check the locating tab that fits into the V-shaped notch and make sure the igniter fits into the cut-out. Refer to the diagram provided by the manufacturer for further instructions.
Fixes these symptoms
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
Alejandro from Newark, NJ
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple.
Read more...
Your Price
$13.95
In Stock
Hotpoint Range Liquid Propane Orifice Spud
PartSelect Number PS1481262
Manufacturer Part Number WB28K10376
This is the replacement propane orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies liquid propane from the gas line to the stove top. Be sure to disconnect your range from its power source and turn off the gas line before you begin this repair. The orifices should simply screw out, and the new one will screw in. This part is about ¼ of a inch in diameter and is gold in color. It is sold individually and is a genuine OEM part.
Installation Instructions
Callie from Bay, AR
two of the burners were not working at all, the other two were blackening pots and pans
I turned off the gas flow to the appliance, removed the old oriface spuds with the adjustable wrench, inserted the new oriface spuds and tightened them with the adjustable wrench. The double burner assembly just dropped on. They fit perfectly. I did not have to use the leveling nuts that were included with the burners. The old levelers were still in place and set perfectly for the new burners. Very easy repair, and the range works like a new one.
Read more...
Your Price
$23.95
In Stock
Hotpoint Range Lp Conversion Kit
PartSelect Number PS16225953
Manufacturer Part Number WB28X39141
This GE Liquid Propane (LP) Conversion Kit is designed for your convenience, providing an optimal solution to convert your range to LP gas. Containing all the necessary orifices, this kit ensures a seamless transition for your appliance. It is imperative that a qualified technician installs it due to the potential risk of fire or explosion if incorrectly implemented. Keep your GE range performing at its best with this quality LP Conversion Kit. Opting for this conversion not only ensures the efficient functioning of your range but also significantly enhances its usability. Enjoy the performance you expect from GE with this LP Conversion Kit.
Your Price
$19.95
In Stock
Hotpoint Range Liquid Propane Orifice Spud
PartSelect Number PS240683
Manufacturer Part Number WB28K10023
This orifice spud changes the burner from natural gas to liquid propane. This orifice is sold individually. Size: .89MM
Your Price
$34.95
In Stock
Hotpoint Range Left Front Orifice
PartSelect Number PS954084
Manufacturer Part Number WB28K10190
This is the replacement left front orifice for your gas range. When your range is operating, gas flows through the orifice to the igniter. This part is the orifice itself as well as the metal holder that holds it in place. If you notice a gas smell when your range is on, you could have a loose or damaged orifice. This part fits the front left burner in your range, so make sure you are replacing the correct orifice. This is an OEM part sourced from the manufacturer and is sold individually.
Fixes these symptoms
- Gas smell
- See more...
Installation Instructions
Kimberly from Leavittsburg, OH
loss of spark to two burners, and bent orifice holder
unplugged the old spark module and plugged the new one in. Disassebled and reassembled the new orifice holder.
Read more...
Related Hotpoint Range Parts
- All Hotpoint Range parts
- Hotpoint Range Brackets and Flanges
- Hotpoint Range Caps and Lids
- Hotpoint Range Circuit Boards and Touch Pads
- Hotpoint Range Cooktops
- Hotpoint Range Deflectors and Chutes
- Hotpoint Range Doors
- Hotpoint Range Drawers and Glides
- Hotpoint Range Drip Bowls
- Hotpoint Range Ducts and Vents
- Hotpoint Range Elements and Burners
- Hotpoint Range Fuses
- Hotpoint Range Grates
- Hotpoint Range Handles
- Hotpoint Range Hardware
- Hotpoint Range Hinges
- Hotpoint Range Igniters
- Hotpoint Range Insulations
- Hotpoint Range Knobs
- Hotpoint Range Latches
- Hotpoint Range Legs and Feet
- Hotpoint Range Lights and Bulbs
- Hotpoint Range Manuals and Literatures
- Hotpoint Range Motors
- Hotpoint Range Panels
- Hotpoint Range Power Cords
- Hotpoint Range Racks
- Hotpoint Range Seals and Gaskets
- Hotpoint Range Sensors
- Hotpoint Range Springs and Shock Absorbers
- Hotpoint Range Switches
- Hotpoint Range Thermostats
- Hotpoint Range Trims
- Hotpoint Range Wire Plugs and Connectors