Hotpoint Range Lights and Bulbs

Your Price

$19.10

Hotpoint Range Light Bulb (40w)

★★★★★

10 Reviews

PartSelect Number PS217532

Manufacturer Part Number 40A15

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Installation Instructions

J. Douglas from Grass Valley, CA

Broken plastic parts

Cleaned the refrigerator as the old parts were removed. Installed new parts as the old parts were removed so as to easily identify the replacement parts. Very easy and wife was extremely happy after old plastic parts self destructed over a period of months and refrigerator was essentially unusable on the bottom two drawers. Read more...

Videos!

Your Price

$36.95

Hotpoint Range Light Housing

★★★★★

12 Reviews

PartSelect Number PS230438

Manufacturer Part Number WB08T10002

The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufacturer instructions, if your bulb has burnt out you must buy the bulb for this part locally. This light housing is roughly five inches high, with an outside diameter of roughly four inches by four inches. To install this part, you will need a Phillips screwdriver, a nut driver, and a pair of pliers.

Installation Instructions

Jack from Okmulgee, OK

Oven Lamp Holder Burned

removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions. Read more...

Videos!

Your Price

$16.95

Hotpoint Range Bulb Lens Cover Glass

★★★★★

10 Reviews

PartSelect Number PS237483

Manufacturer Part Number WB25T10002

This part is the replacement oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the oven light bulb from being damaged. The main reason to replace the oven bulb lens cover is if it is cracked, damaged, or missing. Be sure that the lens cover is cool to the touch before you begin this repair. To remove the lens cover simply turn it counterclockwise until you can remove it. Replace it with a new cover and turn it clockwise to lock it into place. This is an OEM part sourced from the manufacturer, and it is sold individually.

Installation Instructions

Francis from LAKE ELSINORE, CA

broken light cover

twisted it in place Read more...

Your Price

$20.60

Hotpoint Range Light Indicator

★★★★★

2 Reviews

PartSelect Number PS1018167

Manufacturer Part Number WB27T10668

Discover the perfect part for your GE cooktop with this easily installable indicator light. Engineered specifically for your appliance, this indicator light ensures that you always know when your cooking surface is hot, offering an added layer of safety to your culinary process. Prior to installation, ensure the breaker to your cooktop is shut off. Illuminate your cooking experience with this top-quality part exclusively designed for your GE cooktop. Please consult an experienced technician if you require assistance during installation. This light indicator is an essential piece in maintaining a safe and proficient cooking environment.

Installation Instructions

Joe from ERIE, PA

Left front burner not working hot surface light stayed on

Shut off power at breaker panel Took screws out of front of range top lifted it up propped open unplugged wires took off two clips holding burner in place hardest part of job checked wire colors to right places put clips back on pulled out light right next to burner replaced put top down replaced 3 screws turned peer back on hood to go Read more...

Your Price

$21.95

Hotpoint Range Light Cover

★★★★★

10 Reviews

PartSelect Number PS247415

Manufacturer Part Number WB36X192

This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existing light bulb lens. Disconnect power to your appliance before this repair. It is recommended to check the light bulb while the lens cover is removed in case it needs to be replaced. Be sure to remove all broken glass, if applicable, before installing new lens. This part is sourced directly from the genuine manufacturer, and is sold individually.

Installation Instructions

Edward from Ashland, MA

I Tried to remove Oven Light and got a spark that took out the Control Panel.

Oven light was easy - Snapped the Wire Bail, removed the Glass Protect and removed the buld. Installed new bulb, installed Glass Protect and snapped the Wire Bail. The Control Panel was a little harder and had to remove the 4 screws holding the metal Back Plate cover. I wrote down all the wire connections and then unplugged the wires. I took a 1/4 nutdriver and removed 4 screws holding Control panel in place and removed the Panel. The new control panel did not come with the Switch Face Plate so I removed the old one with a razor blade. The Switch Face Plate had plenty of adhessive so I just aligned the Face Plate with the Control Panel and seated it in place - thankfully it held firmly. I installed the Control Panel with Face Plate into the range and secured it with 4 screws using nutdriver. I plugged the wire connectors into the Control Panel and installed the Metal Back Plate to the range and secured it with 4 screws. Plugged the Range into the sockets and checked it for operation. Everything worked Ok including the new oven light. Read more...

Your Price

$23.95

Hotpoint Range Indicator Light

PartSelect Number PS237433

Manufacturer Part Number WB25K10002

The GE brand is known for its high-quality appliance parts and this OEM Indicator Light for Ranges is no exception. This small yet significant piece lights up to signal when the oven or surface burner is in use, adding safety and functionality to your overall cooking experience. This is particularly helpful in knowing when a cooking area is still hot, preventing any accidental touches or burns. Installation is straightforward, but always remember to disconnect the appliance from its power source to ensure safe handling. As is always suggested with replacements, cross-referencing with your service manual or manufacturer's guidelines is recommended. Complete your range with this reliable and durable GE Indicator Light.

Your Price

$13.95

Hotpoint Range Light Lens

★★★★★

1 Review

PartSelect Number PS1015754

Manufacturer Part Number WB25T10042

Presenting the genuine replacement light lens from the reputable brand GE, ideal for ranges. This high-quality product covers the indicator light for both the surface and oven burners, ensuring clear visibility and safety during cooking. As a safety recommendation, please unplug the range prior to installing this light lens. This light lens, distinguished by its vibrant red color, showcases how GE respects both functionality and aesthetic value in their parts. Choose this product for its authenticity, design, and high performance.

Installation Instructions

Jewel from Nacogdoches, TX

The temperature indicator light on the oven was broken.

I removed the control panel by removing 7 screws and replaced the light indicator and lens. Read more...