Back
Back
Keep typing for more specific results...

Hotpoint Microwave Thermostats

Popular Hotpoint Microwave Thermostats

Your Price
$18.95
  In Stock
Hotpoint Microwave Thermostat
★★★★★
★★★★★
4 Reviews
PartSelect Number PS3491479
Manufacturer Part Number WB20X10048
Introducing the GE Microwave Thermostat - a vital safety component for your microwave. Crafted with precision, this thermostat is specifically designed to prevent overheating scenarios which can cause hazards. Its main function is to promptly cut off power and shut down the microwave if a potential overheating problem is detected. Due to the potential risks associated with high-voltage capacitors within the microwave, the installation of this part should ideally be handled by a professional service technician. Invest in this GE Microwave Thermostat for optimal safety and maximum performance of your appliance. Trust GE for reliable and safe microwave operation.
Fixes these symptoms
Installation Instructions
michelle from virginia beach, VA
Original part was fried
Had to remove microwave from the wall. Then disassemble entire top assembly to get to the part. Easy enough to replace after that. Then just reassemble and reinstall. About 2hrs. total Read more...
Your Price
$46.95
  In Stock
Hotpoint Microwave Fan Thermostat
★★★★★
★★★★★
5 Reviews
PartSelect Number PS8754628
Manufacturer Part Number WB27X11213
Fixes these symptoms
Installation Instructions
Jorge from PANORAMA CITY, CA
Thermal Fuse out
There are videos on YouTube on how to do this but there are a couple of things I’m going to recommend. Color code your plugs when you take the main control panel off, be patient when removing the screws on the thermal fuse use a 45 degree screwdriver but replace the screws with a small hex head self tapper screw for next time. The difference between these two lookalike fuses is that one is for the fan and the other one is the thermal there’s a price difference and volts so read the back of the bad fuse. These guys are great man and thank you for helping me out. Read more...
Your Price
$25.95
  In Stock
Hotpoint Microwave Thermostat(plate)
★★★★★
★★★★★
1 Review
PartSelect Number PS2339856
Manufacturer Part Number WB27X11034
Ensure your microwave works efficiently with the GE Thermostat Plate. This crucial component initiates the vent fan when excessive heat rises from the cooktop beneath the microwave, thus protecting your appliance from overheating. Crafted by leading appliance brand GE, this vent hood thermostat is a high-quality, reliable replacement or repair part tailored for your GE microwave. Its function is normally open. Keep in mind that due to the presence of high-voltage capacitors, which can store a lethal electrical charge even when the unit is disconnected, this part should be safely installed by a professional technician. Equip your microwave with the GE Thermostat Plate and maintain its optimal performance.
Fixes these symptoms
Your Price
$57.77
  In Stock
Hotpoint Microwave Thermostat, 160/0
PartSelect Number PS8767141
Manufacturer Part Number WB27X11210
Installation Instructions
Juan from FONTANA, CA
My microwave started tripping the breaker
Yes, it started tripping the breaker and at the end it wouldn't work at all, I started checking continuity on all door switches everything checked good, then I proceeded to check the thermostats and found out that one didnt have continuity so I replaced it. Every thing works good except that as soon as I pluged the microwave to the outlet the exhaust fan comes on and does not shut off. Does anyone known why or do I need to change something else.
Thanks
Read more...
Your Price
$46.95
  In Stock
Hotpoint Microwave Thermostat 120/0
PartSelect Number PS8754627
Manufacturer Part Number WB27X11212
Fixes these symptoms
Installation Instructions
Jorge from PANORAMA CITY, CA
Thermal Fuse out
There are videos on YouTube on how to do this but there are a couple of things I’m going to recommend. Color code your plugs when you take the main control panel off, be patient when removing the screws on the thermal fuse use a 45 degree screwdriver but replace the screws with a small hex head self tapper screw for next time. The difference between these two lookalike fuses is that one is for the fan and the other one is the thermal there’s a price difference and volts so read the back of the bad fuse. These guys are great man and thank you for helping me out. Read more...
Your Price
$48.95
  In Stock
Hotpoint Microwave Thermostat Cut-out
★★★★★
★★★★★
2 Reviews
PartSelect Number PS239319
Manufacturer Part Number WB27X10195
Also known as Thermostat or Humidity Sensor for Fault Code.
Fixes these symptoms
Installation Instructions
Andras from Lexington, MA
Oven would not power up
There are 4 thermostats (aka TCO = Thermal Cut Out) in the GE JVM1440BH04
The schematic is under the cover in a black envelope to the top left of the unit if you face the door.

Check the fuse first. You can remove the front grate, then the numpad on the right. The fuse is right behind it. It's a 250V 20A Class F fuse.

There are four (4) TCOs or Thermal Cut Out thermostats in this puppy:

1) There is a thermostat behind the button panel to the left, facing down. If blown, it breaks the power coming into the unit and will cause a no power situation.

2) There is another TCO or thermostat near the top lamp, to the left, in a small cavity. That one also breaks power to the unit and will cause a no power situation. It's a 100 C / 0 C thermostat. This was the one that blew on me after I left the stove running (for heating in a black-out) under the microwave.


"Cavity TCO" or "Thermostat" part number 61 on the schematics, part number PS239319


3) There is yet another power-breaking TCO or thermostat in the cavity behind the fan that cools the microwave coils. You have to remove the sheet metal on the right of the microwave to access it. This one also breaks power and will cause a no power situation.

1), 2) and 3) should test out to be 0 Ohms with a resistance meter (Digital Multimeter) if working correctly.

4) There is a thermostat which normally does not let current through it. It is mounted in a vertical position to the back wall behind the front panel on the right. This one is used for the sensor reheat function apparently and will close when the temperature in the microwave reaches approx. 60 C.

4) should have infinite resistance with a resistance meter under normal circumstances.
Read more...
Your Price
$23.95
  Special Order
Hotpoint Microwave Thermostat
★★★★★
★★★★★
2 Reviews
PartSelect Number PS235269
Manufacturer Part Number WB20X10003
Installation Instructions
Glen from Highland, IL
ove black out
must of had loose connection from wire terminal
to thermostat from factory. thermostat and wires
were melted. removed thermostat. and cut burnt
wires back. replaced thermostat and terminals.
used better quality terminals than factory.
also checked and tightened other loose connections. there was enough wire left after cut back to just put on new terminals.
Read more...
Your Price
$20.95
  Special Order
Hotpoint Microwave Thermostat
PartSelect Number PS2321517
Manufacturer Part Number WB27X10991
Your Price
$20.95
  Special Order
Hotpoint Microwave Thermostat
PartSelect Number PS2321518
Manufacturer Part Number WB27X10992
Your Price
$26.95
  In Stock
Hotpoint Microwave Thermostat 110/0
★★★★★
★★★★★
2 Reviews
PartSelect Number PS8754624
Manufacturer Part Number WB27X11208
Installation Instructions
Cal from LITCHVILLE, ND
The microwave quit working, yet it had power to the plug.
I took the microwave off the wall and unplugged it, then removed the covering. Then I plugged it back in and took voltage readings at the cord terminal lugs. Then I tested the voltage after the fuse and at every point , following the wire. When I got to the upper heat sensor, which is mounted above the oven cavity, I found that the voltage readings stopped. Also, the wiring sleeve was burnt. I removed the part, then ordered it on line. After re-assembly, it worked. Nice. Read more...

Related Hotpoint Microwave Parts