Back
Back
Keep typing for more specific results...

Hotpoint Dishwasher Parts

Popular Hotpoint Dishwasher Parts

Your Price
$25.95
   In Stock
Hotpoint Dishwasher Lower Spray Arm
★★★★★
★★★★★
35 Reviews
PartSelect Number PS17137081
Manufacturer Part Number WD22X33499
This lower spray arm assembly in your dishwasher distributes water and detergent during the washing cycle by spinning around and spraying water in different directions. You can usually find it attached to a support or hub at the bottom of the dishwasher. If this part is broken, you might notice some signs. You might hear a knocking or banging sound coming from the dishwasher. The spray arm may not rotate properly or might seem wobbly. It is important to replace a damaged arm assembly as your dishes will not get cleaned properly, and they will still have dirt on them even after a wash cycle. It can also cause the dishwasher to have a bad smell because of leftover food residue. To remove your existing arm assembly, you will need to release its locking mechanism before lifting it out of your appliance. Please be informed that this OEM-verified part that DOES NOT come with the heatshield, as per GE directly. This item is sold individually.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
Installation Instructions
Mark De from BRONX, NY
Spray arm had become unattached and burned by the heat element
It was a simple as: attach and done!
There is a ring on the part that tightens clockwise to the nipple that sprays out the water that it rests on. Twist clockwise and you are done!
It is a mystery how it was unattached to begin with but not a problem in the end, it was easy to fix!

Thanks for sending genuine GE parts!
Read more...
Your Price
$12.95
   In Stock
Hotpoint Dishwasher Lower Rack Roller
★★★★★
★★★★★
23 Reviews
PartSelect Number PS16217024
Manufacturer Part Number WD12X26146
The lower rack roller supports the smooth sliding of your dishwasher’s bottom rack. Measuring 1.5 inches in diameter and charcoal-colored, this OEM replacement part is sold individually. Replace all four rollers at once for consistent performance. Wear gloves during installation.
Installation Instructions
Teri from LAGUNA NIGUEL, CA
order #16343054 Complete service rack
this was ordered 4-9-21 and I have yet to receive it. Its difficult to explain the installation when you haven't received the main part. I paid for this but you have not shipped it. Very poor customer service. Read more...
Your Price
$72.95
   On Order
Hotpoint Dishwasher Upper Rack Assembly
★★★★★
★★★★★
57 Reviews
PartSelect Number PS16618975
Manufacturer Part Number WD28X30219
This dishrack is for dishwashers. The dishrack holds the dishes in place during the dishwashing cycle. Follow the instructions in the manual when installing this part.
Fixes these symptoms
Installation Instructions
Cooke, from STAMFORD, CT
Racks were rusted
Terrible! Bottom rack was wrong... original was discontinued. Fork and knife holder did not fit in original location. Parts company new this and still processed the order! Disaster! Read more...
Your Price
$30.95
   In Stock
Hotpoint Dishwasher Gasket
★★★★★
★★★★★
36 Reviews
PartSelect Number PS11700870
Manufacturer Part Number WD08X21894
This part is a replacement gasket for your dishwasher. The gasket creates a seal at the bottom of the dishwasher tub, so water does not leak out while the dishwasher is running. If you notice water leaking out onto the floor, you should inspect the gasket for damages and replace as necessary. The gasket is gray in color and is approximately 22 inches long. It is made of plastic and is sold individually. This is a genuine OEM part sourced directly from the manufacturer.
Fixes these symptoms
Installation Instructions
D from LE CENTER, MN
Gasket at the bottom of the door disintegrated.
Took off the kickplate, diconnected the wires and removed the whole door by lifting straight up, removing spring wires from hinges. Once door is disconnected from the machine, removed one hinge by removing bolt. Slid gasket into place, secured hinge back in place, then reconnected wires at bottom, replaced hinge spring wires and slid door back down onto hinges. Now that we know how to do it, could do it in 15 min to half hour. Read more...
Your Price
$78.52
   In Stock
Hotpoint Dishwasher Lower Rack
★★★★★
★★★★★
83 Reviews
PartSelect Number PS17873657
Manufacturer Part Number WD28X34744
Note: This "Service Rack" fits numerous models. Per factory, on some models, it may be necessary to move the silverware basket to the inside of the rack along the right side.
Fixes these symptoms
Installation Instructions
Teri from LAGUNA NIGUEL, CA
order #16343054 Complete service rack
this was ordered 4-9-21 and I have yet to receive it. Its difficult to explain the installation when you haven't received the main part. I paid for this but you have not shipped it. Very poor customer service. Read more...
Your Price
$29.95
   In Stock
Hotpoint Dishwasher Tub Gasket
★★★★★
★★★★★
34 Reviews
PartSelect Number PS11774412
Manufacturer Part Number WD08X23476
The tub gasket, also known as the door gasket runs along the perimeter of your dishwasher basin and creates a seal that prevents water from leaking out when the tub is full. If you notice water on the floor after you run your dishwasher, it may be an indication that the gasket is loose or damaged. If your door gasket is damaged, it will need to be replaced. To replace the gasket, simply pull the old gasket out of the groove it rests in, and press the new gasket into place. This part is made of black rubber and is sold individually.
Fixes these symptoms
Installation Instructions
Mohammad from WOODBRIDGE, VA
Water was leaking from the bottom of the door during wash cycle
I replaced the tub gasket around the door circumference which took less than five minutes to replace. However the problem was replacing the beach gasket that prevents the water from flowing out of the dishwasher tub. The door had to be unhinged from the dishwasher which was unscrewed from the cabinets and brought out from its location. After the door was completely removed it was laid on its front. After removing the door hinges which were secured with just one bolt I tried to slide the back panel off the front panel but without any success. So I had to remove the torn and worn out gasket while working in a tight space. This is where the problem rose because according to installation instructions there are screws supposed to be holding it to the main body frame. However, in my case rivets were used by the manufacture since this was the first time the gasket was being replaced. So I had to use a power tool With a grinding bit to remove the face of the rivets and essentially cut them out to reveal the underlying holes. After this I replace the beach gasket and then used half inch SS Philips bolts and nuts to secure the gasket to the body frame. Read more...
Your Price
$33.95
   In Stock
Hotpoint Dishwasher Mid Spray Arm
★★★★★
★★★★★
12 Reviews
PartSelect Number PS17137080
Manufacturer Part Number WD22X33498
This OEM mid spray or center wash arm assembly distributes water and detergent in your dishwasher during the wash cycle. It has small nozzles that spray water onto your dishes and is located between the lower and upper rack. A broken assembly will result in weak water flow and ineffective dishwashing. It may also display signs of damage such as cracks, breaks, or missing nozzles. Additionally, a malfunctioning assembly can cause imbalanced water flow, potentially leading to damage to other dishwasher components such as filters or pumps. Prompt replacement is necessary to ensure proper dishwashing performance and prevent further damage. To install this to your appliance, you will need to snap its mounting bracket onto the rack before attaching the arms onto it. This replacement part is sold individually.
Fixes these symptoms
  • Leaking
  • Noisy
  • Not cleaning dishes properly
  • See more...
Installation Instructions
James from DELAND, FL
Knocking sound during wash cycle
Replace all three spray arms and knocking sound disappeared.
Unscrewed counter clockwise old sprayer arms and lifted. Replaced with new sprayer arms and noise disappeared.
Read more...
Your Price
$12.95
   In Stock
Hotpoint Dishwasher Lower Rack Roller & Stud Assembly
PartSelect Number PS16618942
Manufacturer Part Number WD12X27747
Introducing the GE Lower Rack Roller and Stud Assembly, an essential component for your dishwasher. This well-crafted assembly is designed to assist your dishwasher's lower rack in smooth and efficient movement for optimal loading and unloading. Built for durability, this GE assembly ensures consistent and reliable operation, enhancing your dishwasher's longevity. Embrace superior quality and worry-free dishwashing with this essential GE appliance part. Dive into an improved dishwashing experience with GE's commitment to innovation and reliability.
Your Price
$46.95
   In Stock
Hotpoint Dishwasher Lower Rack Wheel Kit 8 Pack
★★★★★
★★★★★
168 Reviews
PartSelect Number PS11726733
Manufacturer Part Number WD35X21038
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when operating, or the dishes are not cleaning properly, you might need to replace one or more of the wheels. Each wheel and axle are made of plastic, and fit into one another so they can be clipped on to the lower dishwasher rack. Many of our customers found this repair to be quick and easy, and the only tool you should need to complete the repair is a pair of pliers.
Fixes these symptoms
Installation Instructions
Mark from Huntingdon Valley, PA
Lower rack wheel was melted
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience. Read more...
Your Price
$12.95
   In Stock
Hotpoint Dishwasher Rack Carrier Kit - Right Or Left Side
★★★★★
★★★★★
6 Reviews
PartSelect Number PS16219735
Manufacturer Part Number WD28X27241
This part is the replacement carrier roller for your dishwasher. It is also known as the wheel support. It is made of gray plastic and is approximately 5 inches by 2 inches. The carrier roller supports the wheels on your upper dish rack so it can slide in and out of the dishwasher efficiently. This part has been redesigned by the manufacturer. This part can now be used on the right or left side of the rack. Because it is made of plastic, the roller can occasionally crack and break, and when this occurs, it will need to be replaced. If you notice that your dish rack is having difficulty sliding in and out, you should check to see if the roller is damaged. This is an OEM part from the manufacturer and it is sold individually. The roller itself, is replacement part number WD12X26146. The cover is no longer needed when replacing the rack carrier kit.
Installation Instructions
Teri from LAGUNA NIGUEL, CA
order #16343054 Complete service rack
this was ordered 4-9-21 and I have yet to receive it. Its difficult to explain the installation when you haven't received the main part. I paid for this but you have not shipped it. Very poor customer service. Read more...

Hotpoint Dishwasher Appliance Types

Related Hotpoint Dishwasher Parts

Popular Hotpoint Dishwasher Models

Below are the most popular Hotpoint Dishwasher models we have. Enter your model number in the search box to find your model.