Gibson Washer Switches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Gibson Washer Switches
Your Price
$53.80
Special Order
Your Price
$30.86
Special Order
Your Price
$56.79
Special Order
Your Price
$26.87
Special Order
Your Price
$124.33
Special Order
Your Price
$17.90
Special Order
Your Price
$99.44
In Stock
Your Price
$138.23
In Stock
Gibson Washer Pressure Switch
The dishwasher needed a new door latch, so I removed the screws attaching the face plate assembly from the door. This allowed acces to the broken latch, which was attached with two screws. Removal of the latch and wires was easy, as was installing the new latch in reverse order of disassembly. I replaced the door gasket as it came in the kit, and it's installation was a snap.
Total repair time for both appliances was perhaps one half hour. Read more...
PartSelect Number PS975853
Manufacturer Part Number 134421000
Introducing a genuine Frigidaire replacement part - the Pressure Switch. This original equipment manufacturer (OEM) component is specifically designed to sense and control the water level in your washer. Ensuring your washer runs effectively, this part is compatible with various models of Frigidaire, Electrolux, White Westinghouse, and Tappan appliances. While installation is straightforward, it is advisable to unplug the washer and shut the water supply off beforehand. Remember to wear work gloves to protect your hands during the process. Trust only genuine parts for maintaining the longevity of your Frigidaire appliances.
Installation Instructions
George from Salem, OR
Dishwasher latch broken, knob broken on load size switch on washer
For the clothes washer, I removed the back of the control panel, which allowed acces to the broken switch. One screw attached the switch to the chassis, which I removed. I removed 4 electrical wires and a vacuum line from the switch and attached them to the new switch, and installed it. Reinstalled the control panel, after checking function of the new switch.The dishwasher needed a new door latch, so I removed the screws attaching the face plate assembly from the door. This allowed acces to the broken latch, which was attached with two screws. Removal of the latch and wires was easy, as was installing the new latch in reverse order of disassembly. I replaced the door gasket as it came in the kit, and it's installation was a snap.
Total repair time for both appliances was perhaps one half hour. Read more...
Your Price
$81.71
Special Order
Gibson Washer Pressure Switch
PartSelect Number PS1524557
Manufacturer Part Number 134680100
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
Installation Instructions
Roger from Dassel, MN
Set wash load size; would begin to agitate at proper time; however would continue to fill with water and overflow.
Removed back cover; pulled knob off front (removed small screw). Removed hose connected to pressure switch. Removed old switch. Electrical connections are numbered 1-2-3, and the part positions are also numbered 1-2-3. Pulled off old, installed new. Reconnected hose. Rehooked screw on front, replace knob and back cover.
Read more...
Your Price
$66.76
Special Order
Related Gibson Washer Parts
- All Gibson Washer parts
- Gibson Washer Bearings
- Gibson Washer Brackets and Flanges
- Gibson Washer Caps and Lids
- Gibson Washer Dispensers
- Gibson Washer Drums and Tubs
- Gibson Washer Hardware
- Gibson Washer Hinges
- Gibson Washer Hoses and Tubes
- Gibson Washer Knobs
- Gibson Washer Latches
- Gibson Washer Motors
- Gibson Washer Panels
- Gibson Washer Seals and Gaskets
- Gibson Washer Springs and Shock Absorbers
- Gibson Washer Timers
- Gibson Washer Trims
- Gibson Washer Wheels and Rollers
- Gibson Washer Wire Plugs and Connectors