General Electric Refrigerator Tanks and Containers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular General Electric Refrigerator Tanks and Containers
Your Price
$53.41
In Stock
General Electric Refrigerator Water Tank Assembly
I replaced the filter too, just incase the freezing water messed with it in some undetectable way. Read more...
PartSelect Number PS783769
Manufacturer Part Number WR17X11440
This tank stores water until the water actuator is activated and water is requested.
Fixes these symptoms
- Leaking
- Leaks water
- Not dispensing water
- See more...
Installation Instructions
Nate from MILWAUKEE, AL
Water tank cracked
So there's a plastic water tank in our fridge, its purpose is to chill water so it's nice and cold when you dispense it from the freezer door tap. Long story short, during out kitchen remodel I stored the fridge in our unheated Wisconsin garage. The leftover water in the tank froze, expanded and ruptured it. Got the replacement, super easy to fix. The tubing connections are shark bite, just press them together and they're water tight. Pretty simple plug and play operation but you do have to pull the fridge all the way from the wall and shut off the water supply.I replaced the filter too, just incase the freezing water messed with it in some undetectable way. Read more...
Your Price
$58.36
In Stock
General Electric Refrigerator Water Tank Disp Assembly
PartSelect Number PS2577882
Manufacturer Part Number WR17X12793
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Your Price
$48.95
In Stock
General Electric Refrigerator Cold Water Tank Coiled
PartSelect Number PS12172811
Manufacturer Part Number WR17X27627
Your Price
$37.95
In Stock
General Electric Refrigerator Insulation Tank Foam
PartSelect Number PS964273
Manufacturer Part Number WR17X11620
Your Price
$95.99
In Stock
General Electric Refrigerator Tank Cold Water
PartSelect Number PS11736997
Manufacturer Part Number WR17X25028
Your Price
$53.41
In Stock
General Electric Refrigerator Tank Cold Water Assembly
PartSelect Number PS8758391
Manufacturer Part Number WR17X13247
Your Price
$45.95
In Stock
General Electric Refrigerator Water Storage Coil
PartSelect Number PS758881
Manufacturer Part Number WR17X11324
Fixes these symptoms
- Leaking
- See more...
Your Price
$103.90
In Stock
General Electric Refrigerator Water Tank Assembly
PartSelect Number PS2354592
Manufacturer Part Number WR17X12702
Your Price
$162.91
In Stock
General Electric Refrigerator Assembly Tank Water
PartSelect Number PS2359941
Manufacturer Part Number WR17X12741
The water reservoir holds the water for the water dispenser as the water chills.
Your Price
$110.69
In Stock
General Electric Refrigerator Dispenser Water Reservoir
The result was I noticed a big puddle coming out from under the fridge (too late for the poor wood floor).
The solution, replace the parts. For the ice maker line, it is one thin line - its easy to replace other than taking care to uncrimp and recrimp the connection up at the entry to the freezer.
For the thicker tube, the one that goes to the water dispenser, you replace the reservoir tank that sits inside the fridge. It has the two lines leaving it permanently attached to the tank, hence you replace the whole thing. There are separate lines and a splice/union that can be used to replace just the last 6 inches near the compressor, but I chose to replace the whole unit. This describes replacing that water chill tank unit.
The tank sits behind the bottom 2 drawers in the fridge.. you see it when you pull out the drawers. It has two lines permanently attached, one runs out of one hole in the bottom of the fridge and to the back of the fridge where it attaches to the exit on the electrical valve. The other runs out of the other hole in the bottom of the fridge and runs along the side, then along the front from the fridge to the freezer side. There is a union that connects that line to another line that then runs up the freezer door. Remove the front cover under the fridge to see this line and the union.
To replace the tank, you have to disconnect it from both ends, where its held in by plastic nuts/unions. Water remaining in the lines will drain out when you disconnect them. I unscrewed the valve assembly from the fridge body and then unplugged the plugs to the valves to do the work (but left the fridge plugged in).
To do this work, I needed to raise the fridge side edge of the appliance, since the hoses route along the underside of the fridge. After you disconnect the two ends (at the union on the freezer side bottom front egdge, and back side at the valve) you can pull the hoses up into the fridge. Routing the new hoses will require you have at least that one side off the floor to get your hands under it. I got two 6" tall 4x4 wood blocks and tipped the fridge slightly, raising the right (fridge) side off the ground and slid the blocks under the fridge rollers.
To remove the tank, before you raise the edge of the fridge, there are two screws that you need to remove (top side and left side) from the storage tank.
I recommend that in addition to removing the bottom two drawers, you remove all the bins hanging in the fridge door, since you need to work in there with gravity wanting to shut the door on you. Once you have the tank unscrewed (and the hose ends disconnected) note which hose(based on where it connects to the tank) goes to which hole in the bottom of the fridge. Pull up the hoses from the inside the fridge. The tank is free..go put it in the sink and drain the water out.
Installing the new tank, remove any hose end caps and route the hoses back through the lower drawer support frame you pulled them out of, and feed the correct hoses back through the holes in the bottom of the fridge. I found it better to feed the longer one first, which leads to the water dispenser/front. I could then pull that one up front from under the raised fridge and clip it in place and then route the other hose fully though its hole and route it to the back of the fridge to the valve. This way I ensured I was sending the right hose to the right destination.
You will likely have to trim the hoses once the tank is reattached as they are slightly long. Be sure Read more...
PartSelect Number PS294082
Manufacturer Part Number WR17X4358
This in-refrigerator dispenser water reservoir tank comes with tubing. This tank stores water until the water actuator is activated and water is requested.
Fixes these symptoms
- Leaking
- Not dispensing water
- See more...
Installation Instructions
Thomas from Sammamish, WA
Leaking water lines fixed.
The problem is the common issue that the proximity of the plastic water lines that leave the electrically controlled valve near the compressor in the bottom back corner of the fridge, means they become brittle and crack/break. Both the line leaving to the ice-maker that runs diagonally across the outside back of the fridge, and the line that runs under the fridge to feed the water dispenser failed at the valve, breaking off just where they start at the valve.The result was I noticed a big puddle coming out from under the fridge (too late for the poor wood floor).
The solution, replace the parts. For the ice maker line, it is one thin line - its easy to replace other than taking care to uncrimp and recrimp the connection up at the entry to the freezer.
For the thicker tube, the one that goes to the water dispenser, you replace the reservoir tank that sits inside the fridge. It has the two lines leaving it permanently attached to the tank, hence you replace the whole thing. There are separate lines and a splice/union that can be used to replace just the last 6 inches near the compressor, but I chose to replace the whole unit. This describes replacing that water chill tank unit.
The tank sits behind the bottom 2 drawers in the fridge.. you see it when you pull out the drawers. It has two lines permanently attached, one runs out of one hole in the bottom of the fridge and to the back of the fridge where it attaches to the exit on the electrical valve. The other runs out of the other hole in the bottom of the fridge and runs along the side, then along the front from the fridge to the freezer side. There is a union that connects that line to another line that then runs up the freezer door. Remove the front cover under the fridge to see this line and the union.
To replace the tank, you have to disconnect it from both ends, where its held in by plastic nuts/unions. Water remaining in the lines will drain out when you disconnect them. I unscrewed the valve assembly from the fridge body and then unplugged the plugs to the valves to do the work (but left the fridge plugged in).
To do this work, I needed to raise the fridge side edge of the appliance, since the hoses route along the underside of the fridge. After you disconnect the two ends (at the union on the freezer side bottom front egdge, and back side at the valve) you can pull the hoses up into the fridge. Routing the new hoses will require you have at least that one side off the floor to get your hands under it. I got two 6" tall 4x4 wood blocks and tipped the fridge slightly, raising the right (fridge) side off the ground and slid the blocks under the fridge rollers.
To remove the tank, before you raise the edge of the fridge, there are two screws that you need to remove (top side and left side) from the storage tank.
I recommend that in addition to removing the bottom two drawers, you remove all the bins hanging in the fridge door, since you need to work in there with gravity wanting to shut the door on you. Once you have the tank unscrewed (and the hose ends disconnected) note which hose(based on where it connects to the tank) goes to which hole in the bottom of the fridge. Pull up the hoses from the inside the fridge. The tank is free..go put it in the sink and drain the water out.
Installing the new tank, remove any hose end caps and route the hoses back through the lower drawer support frame you pulled them out of, and feed the correct hoses back through the holes in the bottom of the fridge. I found it better to feed the longer one first, which leads to the water dispenser/front. I could then pull that one up front from under the raised fridge and clip it in place and then route the other hose fully though its hole and route it to the back of the fridge to the valve. This way I ensured I was sending the right hose to the right destination.
You will likely have to trim the hoses once the tank is reattached as they are slightly long. Be sure Read more...
Related General Electric Refrigerator Parts
- All General Electric Refrigerator parts
- General Electric Refrigerator Bearings
- General Electric Refrigerator Blades
- General Electric Refrigerator Brackets and Flanges
- General Electric Refrigerator Caps and Lids
- General Electric Refrigerator Circuit Boards and Touch Pads
- General Electric Refrigerator Compressors
- General Electric Refrigerator Dishracks
- General Electric Refrigerator Dispensers
- General Electric Refrigerator Doors
- General Electric Refrigerator Drawers and Glides
- General Electric Refrigerator Drip Bowls
- General Electric Refrigerator Ducts and Vents
- General Electric Refrigerator Electronics
- General Electric Refrigerator Elements and Burners
- General Electric Refrigerator Fans and Blowers
- General Electric Refrigerator Filters
- General Electric Refrigerator Fuses
- General Electric Refrigerator Grilles and Kickplates
- General Electric Refrigerator Handles
- General Electric Refrigerator Hardware
- General Electric Refrigerator Hinges
- General Electric Refrigerator Hoses and Tubes
- General Electric Refrigerator Ice Makers
- General Electric Refrigerator Insulations
- General Electric Refrigerator Knobs
- General Electric Refrigerator Latches
- General Electric Refrigerator Legs and Feet
- General Electric Refrigerator Lights and Bulbs
- General Electric Refrigerator Manuals and Literatures
- General Electric Refrigerator Motors
- General Electric Refrigerator Panels
- General Electric Refrigerator Power Cords
- General Electric Refrigerator Racks
- General Electric Refrigerator Seals and Gaskets
- General Electric Refrigerator Sensors
- General Electric Refrigerator Springs and Shock Absorbers
- General Electric Refrigerator Switches
- General Electric Refrigerator Thermostats
- General Electric Refrigerator Transformers
- General Electric Refrigerator Trays and Shelves
- General Electric Refrigerator Trims
- General Electric Refrigerator Valves
- General Electric Refrigerator Wheels and Rollers
- General Electric Refrigerator Wire Plugs and Connectors