Dishwasher Sensors
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Dishwasher Sensors
Your Price
$34.95
In Stock
Dishwasher Pressure Sensor Asm
The repairman came out, charged me $100 to determine what the dishwasher needed & left me with the part number. He was going to charge me $389 to install the part and they were over charging for the part. The repairman suggested I just get a new dishwasher.
I ordered the part from the website at 1/2 the price that the other place charges and found it on line. With the step by step instructions and the online page, I successfully installed it MYSELF. Saved me a ton of $$.
I LOVE the website
Thank You!!!! Read more...
PartSelect Number PS12741258
Manufacturer Part Number WD21X25468
This is a manufacturer-built pressure sensor for dishwashers. This pressure sensor, also known as a pressure switch, is designed to monitor the water pressure, communicate with the control board of the dishwasher, and accurately calculate the necessary amount of water for the washing cycle. If this pressure sensor is bad or not working properly, it will cause over and underfilling of your dishwasher, as well as excessive noise while in operation. To replace this pressure sensor, you will need a screwdriver and wrench to gain access and remove this part, and further disassembly of your dishwasher may be required. This sensor is sold individually and does not come with any other parts.
Fixes these symptoms
- Not draining
- Will not fill with water
- Will Not Start
- See more...
Installation Instructions
Linda from MYRTLE BEACH, SC
Dishwasher would not fill with water and would shut off
I found it online! There were step by step instructions that were easy to understand. I have never had to do anything like this in my life, only recently had to start doing everything around the house myself due to husband's illness. The repairman came out, charged me $100 to determine what the dishwasher needed & left me with the part number. He was going to charge me $389 to install the part and they were over charging for the part. The repairman suggested I just get a new dishwasher.
I ordered the part from the website at 1/2 the price that the other place charges and found it on line. With the step by step instructions and the online page, I successfully installed it MYSELF. Saved me a ton of $$.
I LOVE the website
Thank You!!!! Read more...
Your Price
$31.45
In Stock
Dishwasher Turbidity Sensor
PartSelect Number PS11757214
Manufacturer Part Number WPW10705575
Measures level of soil in the water.
Fixes these symptoms
- Leaking
- Not cleaning dishes properly
- Not draining
- See more...
Installation Instructions
Mark from Lancaster, NY
Failed diagonistics test for OWI sensor
Pulled the dishwasher out from the counter, on the lower right hand side, about mid way back there is a bundle of all yellow wires, follow that to the sensor which mounts into the bottom of the wash tub. The sensor is easily removed by grasping it by hand and turn it about a half turn (can't remember which direction). It then just pulls out. Disconnect the wire bundle by pushing on the retaining clip and the install is the reverse.
Read more...
Your Price
$35.95
In Stock
Dishwasher Sensor Turbidity Assembly
PartSelect Number PS11762982
Manufacturer Part Number WD21X22830
Introducing the GE Turbidity Sensor, an integral dishwasher component designed to keep your dishes sparkling clean. This soil sensor operates by detecting the soil level in your dishwasher's water and communicates this information to the control board. As a safety precaution, always disconnect your dishwasher or turn off the house circuit breaker before initiating installation. It's recommended to wear protective gloves during this process to safeguard your hands. Prioritize efficiency and cleanliness with this top-notch GE dishwasher sensor. Don't settle for less; optimize your dishwasher's performance with GE's commitment to quality and innovation.
Fixes these symptoms
- Not drying dishes properly
- See more...
Your Price
$46.27
In Stock
Dishwasher Sensor
PartSelect Number PS8727345
Manufacturer Part Number 00611323
Fixes these symptoms
- Not cleaning dishes properly
- Not draining
- See more...
Installation Instructions
Daniel from AUBURN, IN
dishwasher not draining, dishes dirty
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find.
Read more...
Your Price
$33.07
In Stock
Dishwasher 00 Sensor
PartSelect Number PS8727335
Manufacturer Part Number 00611312
Fixes these symptoms
- Door latch failure
- Door won’t close
- Will Not Start
- See more...
Your Price
$21.95
In Stock
Your Price
$44.83
In Stock
Your Price
$51.40
In Stock
Dishwasher Sensor
PartSelect Number PS12070543
Manufacturer Part Number W11084121
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Melvin from SACRAMENTO, KY
would not shut off.
easy the sensor was on the right side, and easy to get to, I turn off the power, turned off the water, and pulled it out, the first thing I saw was the yellow wires and plug. took about 5 minutes, to replace it.
Read more...
Your Price
$50.44
In Stock
Your Price
$32.95
In Stock
Dishwasher Sensor Turbidity Assembly
PartSelect Number PS11762980
Manufacturer Part Number WD21X22598
Upgrade your dishwasher with the genuine GE Turbidity Sensor Assembly. This imperative device detects the soil level in the water inside your dishwasher during the washing cycle. It does this by carefully sending critical information to the dishwasher control board. Before attempting installation, be sure to unplug your dishwasher or shut off your household circuit breaker. Protect your hands during installation by wearing work gloves. Trust the high-quality performance and durability of GE for your appliance repair needs.