Craftsman Edger Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Edger Parts
Your Price
$26.83
In Stock
Craftsman Edger Fuel Tank Assembly W/fuel Lines Incl. 29
PartSelect Number PS11812933
Manufacturer Part Number 753-06797
The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Robert from ORANGE, CA
One of the two fuel lines cracked and leaking
Removed the 6 screws holding the red plastic cover, tank, and the old fuel lines from the carburetor. Placed the new tank in the sunlight for a few minutes to soften the new fuel lines. Then attached the new lines to the carburetor and replaced the cover
Read more...
Your Price
$9.16
In Stock
Craftsman Edger Blade
PartSelect Number PS9129938
Manufacturer Part Number 781-0080-0637
This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which may happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.
Your Price
$5.95
In Stock
Craftsman Edger Cultivator Air Filter
PartSelect Number PS9117898
Manufacturer Part Number 753-05996
Your Price
$26.85
In Stock
Craftsman Edger Lawn Mower Drive Belt
PartSelect Number PS9172714
Manufacturer Part Number 954-04032B
This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power from the engine to the pulley that drives the cutting blades. Over time, the belt may become brittle or cracked due to wear and exposure, requiring replacement to maintain optimal performance. Measuring 3L x 35.80 inches, this belt is sold individually. A wrench may be needed for installation, depending on your equipment model.
Your Price
$20.17
Special Order
Craftsman Edger Special Traction Drive Belt
PartSelect Number PS10211505
Manufacturer Part Number 32668MA
Your Price
$26.83
In Stock
Craftsman Edger Trimmer Fuel Tank Assembly
PartSelect Number PS11985241
Manufacturer Part Number 753-06797
Your Price
$11.12
In Stock
Craftsman Edger Throttle Cable
PartSelect Number PS11985186
Manufacturer Part Number 753-06546
This throttle cable is responsible for controlling the engine speed in edgers. It is a manufacturer-approved cable designed with specific end fittings that connect to the throttle control lever on one end and the carburetor on the other. When the throttle control lever is adjusted, the cable transmits the motion to the carburetor, which allows the user to regulate the engine speed. Over time, the throttle cable can wear out, fray, or become disconnected, leading to loss of throttle control, lower power output, and engine stalling. To replace the throttle cable, first ensure the engine is off and cool, for your safety. Locate the end fittings on the cable and disconnect them carefully. Remove the fasteners that secure the cable, and then route the new cable along the same path as the old one. Finally, reconnect the end fittings, and adjust the cable tension as necessary.
Your Price
$9.16
Special Order
Your Price
$7.71
In Stock
Craftsman Edger Snow Blower Star Knob
PartSelect Number PS9109078
Manufacturer Part Number 720-04072A
This Star Knob, which may also be simply referred to as a Knob, is sourced directly from the manufacturer for use in lawn mowers and snow blowers. This part provides a quick-release for handles to fold down, and connect upper and lower handles. It is made of metal, is black, is not part of a kit or assembly, and is sold individually.
This part will need to be replaced if it has become cracked, worn, or damaged. The most common cause for this part needing to be replaced is worn or stripped threads no longer being able to grip. You will need a wrench or socket set and a torque wrench to complete this repair. It should be torqued to the manufacturer's recommendation.
Customers rate this repair as Easy.
Your Price
$13.55
Special Order
Craftsman Edger Torsion Spring
PartSelect Number PS9301385
Manufacturer Part Number 732-0188A
A torsion spring is a grey, metal spring which comes individually sold. It provides tension on triggers and switches and has other applications depending on the equipment. If broken, there will be no tension and the part should be replaced. Installation is rated as Medium difficulty and requires a wrench and socket set.
Craftsman Edger Appliance Types
Related Craftsman Edger Parts
- Craftsman Edger Bearings
- Craftsman Edger Belts
- Craftsman Edger Blades
- Craftsman Edger Brackets and Flanges
- Craftsman Edger Brushes
- Craftsman Edger Carburetors
- Craftsman Edger Control Cables
- Craftsman Edger Deflectors and Chutes
- Craftsman Edger Dipsticks
- Craftsman Edger Drums and Tubs
- Craftsman Edger Engines
- Craftsman Edger Fans and Blowers
- Craftsman Edger Filters
- Craftsman Edger Gears
- Craftsman Edger Handles
- Craftsman Edger Hoses and Tubes
- Craftsman Edger Ignitions
- Craftsman Edger Knobs
- Craftsman Edger Manuals and Literature
- Craftsman Edger Motors
- Craftsman Edger Power Cords
- Craftsman Edger Pulleys
- Craftsman Edger Seals and Gaskets
- Craftsman Edger Spark Plugs
- Craftsman Edger Spindles
- Craftsman Edger Springs and Shock Absorbers
- Craftsman Edger Starters
- Craftsman Edger Switches
- Craftsman Edger Transmissions and Clutches
- Craftsman Edger Wheels and Rollers
- Craftsman Edger Wire Plugs and Connectors
Popular Craftsman Edger Models
Below are the most popular Craftsman Edger models we have. Enter your model number in the search box to find your model.
- 247762660 Walk-Behind Edger
- 247762660 Edger
- 247762660 Walk-Behind Edger
- 247762660 Walk-Behind Edger
- 536772341 Edger
- 316773800 Lawn Edger
- 316773800 Edger
- 29270 Cultivator Edger
- CMXGKAME2979 Edger
- CMXGKAME2979 Edger
- CMXGKAME2979 Lawn Edger
- 536796537 Edger
- 536797400 Edger
- 316772370 Edger
- 316772370 Lawn Edger
- 536797530 Edger
- 536772360 Lawn Edger
- 536772360 Lawn Edger
- 536772360 Edger
- 536772301 Edger