Admiral Washer Latches
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Admiral Washer Latches
Your Price
$20.99
In Stock
Admiral Washer Door Strike
PartSelect Number PS16218028
Manufacturer Part Number W11457841
This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the latch when the door is closed. It keeps the door securely shut so that the washer can start and prevents it from swinging open while the washer is running. It is a safety mechanism that prevents water leakage, injuries, and damage to the washer. If the door strike is damaged or worn down, it may be unable to lock the door properly and the washer may stop mid-cycle or fail to start altogether. Replace the door strike promptly to ensure the proper functioning of your washer.
Fixes these symptoms
- Lid or door won’t close
- Locking Issues
- Will Not Start
- See more...
Installation Instructions
John from AURORA, CO
Tab on door strike got broken off and washer would not operate without it.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
Read more...
Your Price
$54.49
In Stock
Admiral Washer Latch
PartSelect Number PS17217010
Manufacturer Part Number W11700916
Fixes these symptoms
- Lid or door won’t close
- Locking Issues
- Will Not Start
- See more...
Installation Instructions
David from MOUNT CALM, TX
The lid was closed to hard causing the door strike, lid lock bezel and assembly to break.
Changing the door strike was simple just a quarter turn and it pops off. Changing the assembly, remove the screws from the back side at the top, move to facing the front of the machine pull the top toward you about a half inch and it will open. From the back unplug the correct wire, remove assembly and then install in reverse. Good luck.
Read more...
Your Price
$48.95
In Stock
Admiral Washer Lid Latch Assembly
PartSelect Number PS3497627
Manufacturer Part Number W10404050
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
Fixes these symptoms
- Cycle Not Advancing
- Lid or door won’t close
- Locking Issues
- See more...
Installation Instructions
William from Wakefield, RI
Defective lid latch - Cabrio Washer
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.
Read more...
Your Price
$19.95
In Stock
Admiral Washer Strike
I got this new MayTag washer, and wanted to see it work, for myself, so I can try to correct the problem. But in order to see it work, and fill, the lid has to be open, to observe it working.
To do so, there is a part connected to the lid, called a "STRIKE", that when the lid is down, it activates the electronics, making the washer run.
So, I purchased this strike, to insert it in the washer, so I can observe the washer running, while the lid is open. Very easy, no tools required, just stick it in the slot, where the strike, on the lid goes, when the lid is closed. Read more...
PartSelect Number PS11726338
Manufacturer Part Number W10837741
This is a lid strike for various models of top-load washing machines. Lid strikes are designed to engage with the lid switch and communicate to the control board that the washer can start. If your washing machine is having issues starting, or if the lid strike for your washer is visibly damaged it will need to be replaced. Replacing this washing machine lid strike is simple and only requires a screwdriver. This lid strike is made almost entirely of durable white plastic and features two holes on either side for securing with screws. This lid strike is an OEM part and is not sold with any other parts or accessories, such as the necessary screws.
Fixes these symptoms
- Lid or door won’t close
- Locking Issues
- Will Not Start
- See more...
Installation Instructions
Terry from KEYSTONE, IN
wanting to see this new energy efficient washer work, with the lid open
There are a lot of complaints, with these new energy efficient washers, no matter the brand, on the amount of water that is being used, and not properly washing your cloths, while in the wash cycle.I got this new MayTag washer, and wanted to see it work, for myself, so I can try to correct the problem. But in order to see it work, and fill, the lid has to be open, to observe it working.
To do so, there is a part connected to the lid, called a "STRIKE", that when the lid is down, it activates the electronics, making the washer run.
So, I purchased this strike, to insert it in the washer, so I can observe the washer running, while the lid is open. Very easy, no tools required, just stick it in the slot, where the strike, on the lid goes, when the lid is closed. Read more...
Your Price
$60.66
In Stock
Admiral Washer Latch
PartSelect Number PS16543458
Manufacturer Part Number W11513248
The lid lock assembly is responsible for securing the washer lid during operation, preventing accidental openings that could interrupt the cycle. If the lid lock malfunctions, the washer may fail to start or stop mid-cycle.
To replace, unplug the washer, shut off the water supply, and remove the faulty assembly. Install the new component, ensuring all connections are secure before restoring power. Always confirm compatibility with your washer model before purchasing.
Fixes these symptoms
- Locking Issues
- Will Not Start
- See more...
Your Price
$25.16
In Stock
Admiral Washer Lid Lock Bezel (white)
PartSelect Number PS16555327
Manufacturer Part Number W11545554
Introducing the Lid Lock Bezel in classic white, an essential component designed for select Whirlpool washing machine models. This genuine OEM part guarantees a perfect fit and premium quality, enhancing the overall look and functionality of your appliance. It is designed to work seamlessly with specific Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. The Lid Lock Bezel ensures a safe and secure locking of your washing machine lid. Providing a clean, fresh look, the white bezel can easily match the design of most laundry rooms. Please ensure that this part is correct for your model before purchasing.
Fixes these symptoms
- Lid or door won’t close
- Locking Issues
- Will Not Start
- See more...
Installation Instructions
David from MOUNT CALM, TX
The lid was closed to hard causing the door strike, lid lock bezel and assembly to break.
Changing the door strike was simple just a quarter turn and it pops off. Changing the assembly, remove the screws from the back side at the top, move to facing the front of the machine pull the top toward you about a half inch and it will open. From the back unplug the correct wire, remove assembly and then install in reverse. Good luck.
Read more...
Your Price
$30.95
In Stock
Admiral Washer Lid Latch Strike
PartSelect Number PS11750882
Manufacturer Part Number WPW10240513
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, your washer door may not close properly and you may not be able to run your washer. The latch is found under the lid and can be screwed out and replaced. You will need a Phillips-head screwdriver for this repair. This part is sold individually and is and OEM part from the manufacturer.
Fixes these symptoms
- Lid or door won’t close
- Locking Issues
- Will Not Start
- See more...
Installation Instructions
John from Hale Center, Texas, TX
lid would not lock, washer would not run...
Removed old striker ( 2 Phillips head screws ) replaced with new striker with the 2 screws and was done, easy fix...
Read more...
Your Price
$9.95
In Stock
Admiral Washer Bezel
PartSelect Number PS11754116
Manufacturer Part Number WPW10392041
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
John from PATERSON, NJ
Washer would not run or start when start button was pushed.
Based on, online troubleshooting and repair guide. First repair attempt was unsuccessful after replacing suggested parts and required a professional repair tech to diagnose the issue. Second attempt at repair was successful after the proper issue was diagnosed. Sometimes you just have to call a professional. John Suchinsky, Paterson NJ
Read more...
Your Price
$6.95
In Stock
Your Price
$52.44
On Order
Admiral Washer Lid Switch Actuator - Black
PartSelect Number PS11742355
Manufacturer Part Number WP43-0057
This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.
Fixes these symptoms
- Lid or door won’t close
- Will not agitate
- Will not drain
- See more...
Installation Instructions
Larry from Smithville, MO
Machine was very noisy, tub spun slowly when loaded & lid switch actuator was broken. Drive belt had very little tension on it.
Remove the access panel at the back of the machine. Locate the Motor Pivot Spring. It is about the same diameter as a coat hanger and is attached to the motor and the motor base. I was able to remove the old spring and install the new spring with my fingers. When removing the old spring, remove the motor end first, then the motor base end. When installing the new spring, attach the motor base end first, then the motor end.
Read more...
Related Admiral Washer Parts
- Admiral Washer Agitators
- Admiral Washer Bearings
- Admiral Washer Circuit Boards and Touch Pads
- Admiral Washer Dispensers
- Admiral Washer Drums and Tubs
- Admiral Washer Hardware
- Admiral Washer Hinges
- Admiral Washer Hoses and Tubes
- Admiral Washer Knobs
- Admiral Washer Motors
- Admiral Washer Seals and Gaskets
- Admiral Washer Springs and Shock Absorbers
- Admiral Washer Switches
- Admiral Washer Transmissions and Clutches
- Admiral Washer Valves
- Admiral Washer Wire Plugs and Connectors
- All Admiral Washer parts