Washer Dryer Combo Lights and Bulbs
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Washer Dryer Combo Lights and Bulbs
Your Price
$17.80
In Stock
Washer Dryer Combo Refrigerator Light Bulb (40w)
PartSelect Number PS884734
Manufacturer Part Number 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Installation Instructions
judie from mays landing, NJ
interior drawers were off their rollers
pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and had to call a repairman to adjust the dishwasher and alighn it to open and close properly. but i did do good inside. i feel it was easy and a success. thank you for having the supplies for us to attempt to repair it on our own.
Read more...
Your Price
$17.95
In Stock
Washer Dryer Combo Refrigerator Light Bulb 10w
Most sites said the support rollers could cause this.
I found your site PartSelect and with help of your diagrams of the machine ordered the parts I thought were needed plus other parts that might cause the problem.
With machine torn down I replaced the rollers.
I had also ordered the main drive belt and idler assembly with the rollers and these also needed replacement. It is a good idea to order other suspect parts when doing this type of repair since you can return the parts not needed.
Your return policy is great.
Edward Brennan Read more...
PartSelect Number PS11739347
Manufacturer Part Number WP22002263
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
Installation Instructions
Edward from Andover, NJ
Dryer was sqeaking loudly when running
I Looked on internet sites for this type of problem.Most sites said the support rollers could cause this.
I found your site PartSelect and with help of your diagrams of the machine ordered the parts I thought were needed plus other parts that might cause the problem.
With machine torn down I replaced the rollers.
I had also ordered the main drive belt and idler assembly with the rollers and these also needed replacement. It is a good idea to order other suspect parts when doing this type of repair since you can return the parts not needed.
Your return policy is great.
Edward Brennan Read more...
Your Price
$15.69
In Stock
Washer Dryer Combo Light Bulb (7w)
PartSelect Number PS11731356
Manufacturer Part Number W10857122
Sold individually. This bulb is a 7-watt appliance incandescent light bulb. This appliance light bulb is two inches long. It is used for many clothes dryers. You will need a Phillips screwdriver and needle-nose pliers. Unplug the power from your dryer. You will find the light bulb by opening your dryer door and locating the casing surrounding the bulb on the top of the inside of the door. You will need to remove the single screw holding it in place to access the bulb. Twist the old bulb out of place. Use your pliers if the base of the bulb is still inside the socket once the glass part of the bulb has been removed. Check to make sure that the socket itself is not damaged. If the socket is damaged it will need to be replaced as well. Screw your new bulb into place.
Installation Instructions
Mark from West Chester, PA
Timer won't advance for auto-sensing cycles. Low Heat.
First I unplugged the dryer from the wall outlet. Then, removed the access panel in the lower front (held on by 2 screws near the floor). Then, I removed the black plastic air duct (held by 3 screws) in front of the blower. Then, with a Sharpie marker, next to each wire terminal lug, I labeled on the chassis the COLOR of each wire where it plugs on to a terminal lug (for proper wiring re-assembly later). Then, thru the lower front, I reached into the lower left rear of the dryer to remove the heating element assembly from its metal duct (held by 3 or 4 screws) - it slides down a bit, then it is easily removable. I layed the element on the floor in front of the dryer - all wiring still intact. Then, using the NEW HEATING ELEMENT and SENSORS ordered, I assembled them to match the original, re-using screws off of the old unit - and moving the wiring one-by-one from the original to the new assembly. I then installed the new heating element assembly into the duct at the lower rear of the dryer. I then replaced the 2 sensors on the front metal panel of blower housing, with new parts from my order, re-using the original wiring and screws. Then I re-installed the black plastic duct onto the front of the blower. Then, on the top of the dryer, I dissassembled the control panel from the rear, by removing 5 screws. I then found the resistor mounted on the back of the timer, and replaced it with the new one. Since the new resistor did not come with terminal lugs crimped on its wires, I had to cut the terminal lugs off of the original resistor and solder them onto the new resistor. I then reassembled the control panel. I then plugged the dryer back into the wall outlet and did a test run with no clothes. IT WORKED !! Then I reinstalled the lower front access panel and ran the dryer with wet clothes. IT WORKED !!
Read more...
Your Price
$20.67
In Stock
Washer Dryer Combo Dryer Light Bulb
PartSelect Number PS11728997
Manufacturer Part Number 6913EL3001E
Installation Instructions
Duane from TROY, TX
Your Price
$13.75
In Stock
Washer Dryer Combo Lamp Cover
PartSelect Number PS3519698
Manufacturer Part Number 3550EL2001A
Installation Instructions
Lorraine from SEQUIM, WA
Lamp cover broke
Unscrew the screw, remove old part, place in new part, replace screw and you are done.
Read more...
Your Price
$13.95
In Stock
Washer Dryer Combo Socket Rod Support
PartSelect Number PS3501418
Manufacturer Part Number WH01X10620
Your Price
$7.95
In Stock
Washer Dryer Combo Range Indicator Light Lens
removed wires
removed two screws and removed switch
replaced switch and two screws
replaced wires and back cover Read more...
PartSelect Number PS11744689
Manufacturer Part Number WP7730P011-60
Sold individually.
Installation Instructions
James from Chesapeake, VA
could not control burner temp.
removed back coverremoved wires
removed two screws and removed switch
replaced switch and two screws
replaced wires and back cover Read more...
Your Price
$24.95
In Stock
Washer Dryer Combo Lens
PartSelect Number PS12578477
Manufacturer Part Number W11226088
This parts covers the bulb inside the drum.
Installation Instructions
Chris from Valley Stream, NY
Lens melted because paper got behind the lens and was heated by the lamp.
1 screw to replace.
Read more...
Your Price
$57.37
In Stock
Washer Dryer Combo Lamp Assembly
Plugged dryer in, problem fixed.
Taa Daa
Thanks, PARTSELECT.
That saved me about $50.00 YAHOO!! Read more...
PartSelect Number PS418836
Manufacturer Part Number 131843500
Installation Instructions
Robert from DeForest, WI
broken cover over interior light.
Unpluged the dryer, took out the light assembly, unpluged the wires to the unit, replaced the old unit with new unit from Partselect.Plugged dryer in, problem fixed.
Taa Daa
Thanks, PARTSELECT.
That saved me about $50.00 YAHOO!! Read more...
Your Price
$103.83
On Order