Washer Dryer Combo Insulation

Videos!

Your Price

$7.31

Washer Dryer Combo Agitator Directional Cogs

★★★★★

395 Reviews

PartSelect Number PS388034

Manufacturer Part Number 80040

This kit is used for replacing the agitator directional cogs (Agitator Dogs, Agitator Repair Kit, Washer Agitator Dogs, Agitator Dog Ears). The agitator is what creates the thrusting motion in your washer to tumble your clothes during the washer cycle. Your agitator will rotate one way, and not the other. The agitator dogs are what prevent the agitator from rotating in both directions, while allowing it to rotate in one direction. Your agitator cogs may be malfunctioning if you can manually rotate the agitator in both directions. If broken they will need to be replaced. Cogs can be found by simply removing the softener dispenser and then removing the agitator cap. The are attached to the agitator. This replacement part features 4 agitator directional cogs. There are 4 cogs per package that are made up of high-quality plastic. This part comes in white/beige.

Fixes these symptoms

Does not dispense fabric softener or detergent
Marks left on clothes
Not cleaning dishes properly
See more...

Installation Instructions

mike from Kent, WA

washer wouldn't agitate

First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair. Read more...

Your Price

$19.95

Washer Dryer Combo Insulator And Clip

PartSelect Number PS11757516

Manufacturer Part Number WPY303881

Installation Instructions

Dustin from Washington, MO

Heater coil grounded out and push to start button was broke

I got a free Maytag washer and dryer set. All I had to do was put a new coil and start switch and it works. I did double check the wiring with the diagram behind the control panel. Everything went smooth...very easy repair. Thanks partselect for the quick shipping and parts. I can know save my money from the laundromat which is so expensive these days. Easy fix..just make sure the wiring is good before making these repairs. Read more...

Your Price

$49.95

Washer Dryer Combo Outer Door Heat Shield Insulator

PartSelect Number PS1146953

Manufacturer Part Number 134535300

Introducing the Frigidaire Genuine Replacement Part - a high-quality knob for your washer/dryer combo. This OEM component is designed for compatibility with select Frigidaire, Electrolux, White Westinghouse, and Tappan models. An integral part of your appliance, this genuine knob boasts an incorporated heat shield and outer door insulator to minimize noise and prevent heat escape. It is crucial to cross-check your model before making a purchase to ensure perfect fit. Featuring an easy-to-install design, simply don some work gloves for the task to safeguard your hands. Commend your laundry-center today with this Frigidaire replacement knob.