Washer Dryer Combo Drums and Tubs
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Washer Dryer Combo Drums and Tubs
Your Price
$13.62
In Stock
Washer Dryer Combo Front Glide Kit
2. Removed 4 screws from inside the dryer, to take off the blower housing.
3. Removed 4 screws and took out the large metal piece which supports the drum at the front. Removed the drum.
4. Replaced the two rollers that support the drum in the rear. Cleaned the pins they run on, and oiled very lightly. Also replaced the idler roller. I was surpirsed to see that these rollers use plain bearings, not ball bearings.
5. On the front support piece, drilled out the rivets for the glides, and replaced the worn out glides with new parts. Applied a little glue (3M weatherstrip adhesive) to the cork pieces, to glue them to the metal. Attached the plastic pieces over the cork pieces, and riveted in place using rivets that came with the glide kits.
6. Replaced front and rear felt seals. This was not as tricky as I expected it to be. They were held in by metal tabs. Glued the ends where they came together.
7. Replaced the felt blower seal. Glued to the blower housing.
8. Reinstalled the drum, installed new belt, which came with good instructions (luckily).
9. Reassembled front support piece and the front of the cabinet.
I also cleaned the lint from the cabinet and from the vent hose.
In general, the job went without a hitch, and the machine probably has quite a few years left, despite the fact that it's 18 years old. This gives me a good feeling.
I'd say this would be challenging, though, for someone who is not pretty experienced with machinery repair. Also, the cost of the parts was significant enough that it would not have been unreasonable to have opted for a new machine. Read more...
PartSelect Number PS1804752
Manufacturer Part Number 306508
The front glide is located at the front of the dryer, the drum rides along it. If you hear a metal-on-metal noise when your dryer is running, your front glide may be worn out and require replacing. This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. While you have the front bulkhead removed for this repair, you may want to inspect the felt that lines it. If the felt is damaged, it is recommended that you replace it at the same time. You will need a rivet tool for this installation, as well as a stubby Phillips screwdriver, a 5/16 nut driver, and a drill with a 1/8-inch bit.
Fixes these symptoms
- Drum Not Spinning
- Marks left on clothes
- Noisy
- See more...
Installation Instructions
John from Charlottesville, VA
Belt broke on old machine.
1. Removed front of machine (2 screws at the bottom).2. Removed 4 screws from inside the dryer, to take off the blower housing.
3. Removed 4 screws and took out the large metal piece which supports the drum at the front. Removed the drum.
4. Replaced the two rollers that support the drum in the rear. Cleaned the pins they run on, and oiled very lightly. Also replaced the idler roller. I was surpirsed to see that these rollers use plain bearings, not ball bearings.
5. On the front support piece, drilled out the rivets for the glides, and replaced the worn out glides with new parts. Applied a little glue (3M weatherstrip adhesive) to the cork pieces, to glue them to the metal. Attached the plastic pieces over the cork pieces, and riveted in place using rivets that came with the glide kits.
6. Replaced front and rear felt seals. This was not as tricky as I expected it to be. They were held in by metal tabs. Glued the ends where they came together.
7. Replaced the felt blower seal. Glued to the blower housing.
8. Reinstalled the drum, installed new belt, which came with good instructions (luckily).
9. Reassembled front support piece and the front of the cabinet.
I also cleaned the lint from the cabinet and from the vent hose.
In general, the job went without a hitch, and the machine probably has quite a few years left, despite the fact that it's 18 years old. This gives me a good feeling.
I'd say this would be challenging, though, for someone who is not pretty experienced with machinery repair. Also, the cost of the parts was significant enough that it would not have been unreasonable to have opted for a new machine. Read more...
Your Price
$24.95
In Stock
Washer Dryer Combo Drum Glide (white)
PartSelect Number PS5574052
Manufacturer Part Number 137513300
This white drum glide is used in a clothes dryer to ensure the front of the dryer drum is supported as it does rotations. *Please note: these are sold individually, however there are two of these in your appliance. We recommend that these be replaced at the same time, this allows for optimal performance and ensures they wear evenly. Each drum glide is approximately 33 inches in length. If the following symptoms occur, consider replacing the drum guide as a solution: dryer is noisy, will not tumble, or leaves marks on clothes. Remember to unplug the power source to the dryer before installing this part. Refer to the diagram provided by the manufacturer for further instructions and guidance.
Fixes these symptoms
- Marks left on clothes
- Noisy
- See more...
Installation Instructions
Sergio from Cromwell, CT
Clothes were getting caught in gap, leaving burn mark.
Took the face off, and replaced the worn down drum glide and felt. Works just fine now.
Read more...
Your Price
$28.95
In Stock
Washer Dryer Combo Tall Baffle
PartSelect Number PS11741085
Manufacturer Part Number WP33002032
This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle.
NOTE: Screws are NOT included.
Fixes these symptoms
- Noisy
- See more...
Installation Instructions
Teresa from Pace, FL
dried too many shoes and broke the baffles
removed door, removed screws to lift top panel, removed screws that held old baffles, replaced with new baffles, took off front panel and cleaned out excess lint while I was in there.
Read more...
Your Price
$54.40
In Stock
Washer Dryer Combo Drum Baffle
PartSelect Number PS3418909
Manufacturer Part Number 137263600
Sold individually. Baffle only.
Your Price
$31.95
In Stock
Washer Dryer Combo Short Baffle
PartSelect Number PS11741064
Manufacturer Part Number WP33001755
This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle.
Fixes these symptoms
- Noisy
- See more...
Installation Instructions
Teresa from Pace, FL
dried too many shoes and broke the baffles
removed door, removed screws to lift top panel, removed screws that held old baffles, replaced with new baffles, took off front panel and cleaned out excess lint while I was in there.
Read more...
Your Price
$44.83
On Order
Washer Dryer Combo Dryer Baffle
PartSelect Number PS3522961
Manufacturer Part Number 4432EL1002A
Designed exclusively for your LG dryer, the Drum Baffle - Lifter is a premium, OEM (Original Equipment Manufacturer) component guaranteed for an exact fit and superior performance. This drum baffle lifts and tumbles clothing within the drum during the drying cycle, contributing to efficient and thorough drying. Always remember to unplug your dryer before proceeding with the installation of this component. Also, always wear work gloves to provide protection for your hands while installing. Consult your model's manual to ensure this is the correct component for your dryer - as parts might visually appear the same, but might have small size and shape variations. Trust in the quality, durability, and reliability that LG provides with every component.
Your Price
$35.95
In Stock
Washer Dryer Combo Tub Cover 24
PartSelect Number PS12343494
Manufacturer Part Number WH44X27239
Elevate the efficiency of your washer with the robust GE Tub Cover 24. Crafted to precision, it snaps perfectly over the top of the washer tub, acting as a robust splash shield. The utilitarian design ensures the widespread reduction of water splashes during the washing process. Make sure to wear work gloves to safeguard your hands while installing this high-quality part. With its durable build, this tub cover significantly aids in prolonging your washer's lifespan. Discover the peace of mind that comes with using trusted GE parts in your appliances.
Installation Instructions
Steven from PHILADELPHIA, PA
Lower drum spline failure unstable replaced and just a snap on to the outer tank.
After drum replacement just clips to snap on outer tub then assembled front cross support, top lid unite and front panel.
Read more...
Your Price
$79.33
In Stock
Washer Dryer Combo Ring Tub
PartSelect Number PS11756029
Manufacturer Part Number WPW10531289
Presenting our genuine Whirlpool RING-TUB upper outer tub ring - the ideal component for ensuring your washer operates smoothly. Meticulously designed for a range of Whirlpool, KitchenAid, Amana, Maytag, Jenn-Air, Inglis, and Magic Chef models, it provides an exceptional solution for your appliance replacement part needs. This tub ring superbly enclasps the top of the tub, thus acting as an effective splash shield. Prioritize your safety by wearing work gloves during the installation of this item. Please cross-check this part number correctly aligns with your model before purchasing to enhance the efficacy of the part. Indulge in the quality assurance of Whirlpool's OEM part for optimal performance and durability of your appliance.
Your Price
$54.40
In Stock
Washer Dryer Combo Drum Vane
I removed the one phillips screw that secures the drum, but found the vane did not slide toward the front as I'd read it should. Nor was I able to squeeze the base to release it. I ended up using a rubber mallet and screwdriver to spring the snaps at the bottom of the vane. Once I had two of these on the same side out, I was able to slide the vane forward and remove it. Turns out there was a metal tab, part of the drum, bent into the vane so it couldn't slide for removal. I bent this tab down even with the drum surface, and the new vane slid in easily. Read more...
PartSelect Number PS417359
Manufacturer Part Number 131274600
Also known as a Drum Baffle. Sold individually.
Fixes these symptoms
- Marks left on clothes
- See more...
Installation Instructions
Eugene from Westbrook, ME
broken drum vane needed replacing
Front-loading Frigidaire washer made by Electrolux: I removed the one phillips screw that secures the drum, but found the vane did not slide toward the front as I'd read it should. Nor was I able to squeeze the base to release it. I ended up using a rubber mallet and screwdriver to spring the snaps at the bottom of the vane. Once I had two of these on the same side out, I was able to slide the vane forward and remove it. Turns out there was a metal tab, part of the drum, bent into the vane so it couldn't slide for removal. I bent this tab down even with the drum surface, and the new vane slid in easily. Read more...
Your Price
$52.42
Special Order
Washer Dryer Combo Drum Baffle
This is the third repair that I have done using parts from parts select. the other two repairs involved replacing electrical parts. Specifically thermostatic controls or swicthes. I am very happy with the parts and the diagrams provided on your web site without wich I would have had to replace my dryer a long time ago. Read more...
PartSelect Number PS8689126
Manufacturer Part Number 137552900
This part moves the clothes around inside your dryer and helps to direct the flow of hot during the drying cycle.
Installation Instructions
Alfred from Loveland, CO
Old Dryer drum veins degraded and broke down.
I opened the top of the dryer to gain access to the outside of the drum. Then I removed the screws holding the old drum veins in using the electric drill with the nut driver attachment. Then I positioned the new veins in place on the inside of the drum and replaced the screws from the outside of the drum to hold the veins in place. Then I replaced the top and was ready to go.This is the third repair that I have done using parts from parts select. the other two repairs involved replacing electrical parts. Specifically thermostatic controls or swicthes. I am very happy with the parts and the diagrams provided on your web site without wich I would have had to replace my dryer a long time ago. Read more...
Washer Dryer Combo Drum or Tub Brands
- Crosley Washer Dryer Combo Drums and Tubs
- Frigidaire Washer Dryer Combo Drums and Tubs
- General Electric Washer Dryer Combo Drums and Tubs
- Kenmore Washer Dryer Combo Drums and Tubs
- LG Washer Dryer Combo Drums and Tubs
- Maytag Washer Dryer Combo Drums and Tubs
- Whirlpool Washer Dryer Combo Drums and Tubs