Troy-Bilt Pressure Washer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Troy-Bilt Pressure Washer Parts
Your Price
$19.38
In Stock
Troy-Bilt Pressure Washer Fuel Valve W/bushing
PartSelect Number PS8911051
Manufacturer Part Number 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve and the rubber cap. Its primary purpose is to deliver fuel from the tank to the carburetor.
This part is found on the underside of the fuel tank and should be replaced when it is worn or damaged. When malfunctioning, it may cause your engine to be starved of fuel and run rough or not at all. You will need a screwdriver and pliers to complete this repair.
Customers rate this repair as Easy.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
James from PICAYUNE, MS
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Read more...
Your Price
$27.40
In Stock
Troy-Bilt Pressure Washer Chemical Injection Kit
PartSelect Number PS8911045
Manufacturer Part Number 192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers.
If the cleaning solution will not dispense, it is possible that you need a new Chemical Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair.
Customers rate this repair as Easy.
Installation Instructions
Carl from ARCADIA, FL
The copper fitting on the chemical injection broke.
I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in backwards you pressure will fed directly into your chemical container!!
Read more...
Your Price
$30.75
In Stock
Troy-Bilt Pressure Washer Water Outlet Kit
PartSelect Number PS8911836
Manufacturer Part Number 201497GS
This is a genuine OEM sourced component which is specially designed for Craftsman pressure washers. It is an identical replacement for a missing or damaged outlet that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality part is made of durable metal and is sold individually.
Fixes these symptoms
- Leaks water
- See more...
Your Price
$11.71
In Stock
Troy-Bilt Pressure Washer Pump Mounting Hardware Kit
PartSelect Number PS8906491
Manufacturer Part Number 192649GS
Your Price
$11.63
In Stock
Troy-Bilt Pressure Washer Fuel Valve Kit
PartSelect Number PS9939013
Manufacturer Part Number 310333GS
Your Price
$50.82
In Stock
Troy-Bilt Pressure Washer Water Inlet Kit
PartSelect Number PS8911835
Manufacturer Part Number 201496GS
Your Price
$26.66
In Stock
Troy-Bilt Pressure Washer Engine Mounting Hardware Kit
PartSelect Number PS8912248
Manufacturer Part Number 195294GS
Installation Instructions
Edward from BANGOR, PA
The foward motor mounts both failed allowing the entire engine and pump to swing back
I loosened the rear motor mounts which protrude through slots in the frame using a 15mm open end allowing the engine to be moved enough to pass the front mounts through both the frame and the engine mounting holes. The upper bolts on the front mounts don't have enough clearance for a socket or box end and the open end gets less than a quarter turn at a time unless you remove the wheels. I just took my time and tightened the nuts being careful not to round the corners. The lower bolt/nuts present no problem.
Read more...
Your Price
$20.06
In Stock
Your Price
$257.45
In Stock
Troy-Bilt Pressure Washer Pump Assembly
PartSelect Number PS9270371
Manufacturer Part Number 207365GS
Pressure washer pump kit. If the pressure washer is leaking water, the pump may need to be rebuilt or replaced. If the pump is more than a few years old, and you use the pressure washer fairly often, replace the pump.
Your Price
$16.05
In Stock
Troy-Bilt Pressure Washer Thermal Relief Valve
PartSelect Number PS9270416
Manufacturer Part Number 208673GS
Sourced directly from the manufacturer, this part is used to open and release hot water if the water exceeds the maximum operating temperature. It has metal and plastic components, is not part of a kit or assembly, and is sold individually.
When malfunctioning, the Thermo Relief Valve will open on a regular basis, which can cause damage to your pump. If it is opening often or on a regular basis, replace it to protect your pump from damage. You will need a socket set, a wrench set, and pliers to complete this repair.
Customers rate this repair as Easy.
Troy-Bilt Pressure Washer Appliance Types
Related Troy-Bilt Pressure Washer Parts
- Troy-Bilt Pressure Washer Bearings
- Troy-Bilt Pressure Washer Blades
- Troy-Bilt Pressure Washer Brackets and Flanges
- Troy-Bilt Pressure Washer Caps and Lids
- Troy-Bilt Pressure Washer Handles
- Troy-Bilt Pressure Washer Hardware
- Troy-Bilt Pressure Washer Hoses and Tubes
- Troy-Bilt Pressure Washer Knobs
- Troy-Bilt Pressure Washer Pumps
- Troy-Bilt Pressure Washer Seals and Gaskets
- Troy-Bilt Pressure Washer Springs and Shock Absorbers
- Troy-Bilt Pressure Washer Wheels and Rollers
Popular Troy-Bilt Pressure Washer Models
Below are the most popular Troy-Bilt Pressure Washer models we have. Enter your model number in the search box to find your model.
- 020381 3000 MAX PSI Pressure Washer
- 020240 Troy-Bilt Pressure Washer Model 020240 Parts
- 01903 Pressure Washer
- 020344 Troy-Bilt Pressure Washer Model 020344 Parts
- 020210 Troy-Bilt Pressure Washer Model 020210 Parts
- 020316 Troy-Bilt Pressure Washer Model 020316 Parts
- 020245 Troy-Bilt Pressure Washer Model 020245 Parts
- 020208 Troy-Bilt Pressure Washer Model 020208 Parts
- 020242 Troy-Bilt Pressure Washer Model 020242 Parts
- 020241 Troy-Bilt Pressure Washer Model 020241 Parts
- 020209 Troy-Bilt Pressure Washer Model 020209 Parts
- 020207 Troy-Bilt Pressure Washer Model 020207 Parts
- 01904 Pressure Washer
- 020213 Troy-Bilt Pressure Washer Model 020213 Parts
- 020293-2 2,550 PSI Pressure Washer
- 020316-0 3,000 PSI Pressure Washer
- 9818-0-41050 9818-0 - 41050, 6,600 Cp Pressure Washer Troy-Bilt
- 020200-0 2,700 PSI Pressure Washer
- 020568-00 020568-00 - 2,800 Psi Troy-Bilt
- 020767-00 020767-00 - 3,400 Psi Troy-Bilt Pressure Washer